Sorry, you did not mention pins so I assumed you had found that one...
Top icon bar next to the part name there is a icon, edit pin per part or
not. set this to enable you to add pins that are specific to individual
parts of the device.
Andy
On Mon, 26 Apr 2010 19:54:23 -0700
David
I have done it for relays 2x contacts, 1x coil) and 4051 (separate
control)...
Em 26-04-2010 17:26, David escreveu:
Is it possible to create, for example, a 12AX7A with three parts in it? Part
A B are the triodes, but is it possible to have the third as the filament
which isn't round but
Yes easily.
Select the part you want to edit.
when you draw a circle. line or box, right click and select
line/circle/rectangle options then untick the common to units box,
whatever you drew will then only appear on that part and not the others.
Andy
On Mon, 26 Apr 2010 20:26:27 -
David
Andy Eskelson wrote:
Yes easily.
Select the part you want to edit.
when you draw a circle. line or box, right click and select
line/circle/rectangle options then untick the common to units box,
whatever you drew will then only appear on that part and not the others.
Andy
I gave it a