shazanaz2001@ yahoo.com
To: kicad-users@ yahoogroups. com
Sent: Mon, May 24, 2010 7:14:51 AM
Subject: [kicad-users] Re: Images/Logos in KiCad Schematic
Hi
Great effort, and Thank You!
I get an error message when I try to place the module:
err Pad: Id inconnu, and then the logo module is shown as just
Have a read of the help documentation for pcbnew, it recommends that
module management be done with a dummy board file. If you have a hunt in
the mods directories you will find these board files for the provided
mods.
Essentially you create an A4 size board, and place your modules on it.
You can
...@yahoo.com
To: kicad-users@yahoogroups.com
Sent: Mon, May 24, 2010 7:14:51 AM
Subject: [kicad-users] Re: Images/Logos in KiCad Schematic
Hi
Great effort, and Thank You!
I get an error message when I try to place the module:
err Pad: Id inconnu, and then the logo module is shown as just one horizontal
Hello Claudio,
Like every component in Kicad you can switch from comp side to copper side.
Image is mirrored to keep a good aspect.
Thanks to Markus for this good piece of work.
I made some mods to the ascii result to suppress .LocalClearance 10 that
cause some trouble.
Friendly, Yves.
---
Yves, you have a point there, thanks
I was trying to do the wrong way.
Claudio.
2010/5/24 ymasquel yves.masquel...@free.fr
Hello Claudio,
Like every component in Kicad you can switch from comp side to copper side.
Image is mirrored to keep a good aspect.
Thanks to Markus for this good
Hi,
I like the idea of converting images to KiCad modules. Since I am the author of
JavE (a free Ascii-Art editor), I experimented with extending its Image2Ascii
converter to also support KiCad module file output. It might seem a little
strange to use an Ascii-Art editor for this purpose,