--- In kicad-users@yahoogroups.com, newskyperhh [EMAIL PROTECTED]
wrote:
I want to make a single layer PCB with only one copper site. So i must
make manually bridges on component side.
But I can't make any pad's or continuous bonding / interlayer
connection for bridges.
Just make a track
Excellent tools, Renie. Thank you for making them available!
--- In kicad-users@yahoogroups.com, klui_ [EMAIL PROTECTED] wrote:
It's used during manual board making for centering a drill.
For home-made boards, rather than using the plot command to create
gerbers, use the print command and print exact 1:1 for each layer.
That way the layers print as
--- In kicad-users@yahoogroups.com, oecherexpat [EMAIL PROTECTED]
wrote:
Is there a way of doing a panelisation? I have to create 3 PCBs on
one
panel anyway and thought it would be a good idea to save the money
and
do the whole panelisation myself. Would also give me a better
respond
time
--- In kicad-users@yahoogroups.com, simon.clubley
[EMAIL PROTECTED] wrote:
I layout my circuits on Veroboard and I am currently using Vutrax
because
it has the capability to layout a Veroboard style track in it's PCB
designer.
I would like to switch to an open source package like gEDA or
--- In kicad-users@yahoogroups.com, benjaminrohland
benjaminrohl...@... wrote:
Can you tell me which contractor is the best for producing my
conductor
board prototype? I found some in the internet, but the prices are
similar. Are there any pros and cons I have to pay attention to?
There
--- In kicad-users@yahoogroups.com, Doug dsc3...@... wrote:
I am not understanding something here. I am in Eschema, I select
preferences then libs and dir. I add (or ins) new libraries. I save
cfg to the project file name. As long as I am in the current sheet
libraries I added are there. Then
--- In kicad-users@yahoogroups.com, Robert birmingham_spi...@... wrote:
Hi all,
I've been asked to shrink the size of the solder paste windows relative
to the pads by 0.04mm, ie if a pad is a 1mm diameter circle, I've been
asked to make the solder paste window 0.96mm in diameter. Does
--- In kicad-users@yahoogroups.com, Robert birmingham_spi...@... wrote:
Thanks. I should add that they want the solder mask to be positive (ie
the solder mask clearance is supposed to be 0.4mm), so your cunning idea
can't be applied in this case.
[sound of planting face in hand] D'oh!
--- In kicad-users@yahoogroups.com, Robert birmingham_spi...@... wrote:
Hmmm - that would be a lot of manual editing. OK, thanks. At least I
can now solve it with a bit of C code if they insist on this one.
Give this a try (I hope the Y! formatting doesn't totally destroy it.) May need
--- In kicad-users@yahoogroups.com, Julien Bayle julien.ba...@... wrote:
hi,
I create a pretty ground zone in order to suppress some tracks.
no problem for the zone creation. it is very well documented so..
BUT I have a little problem:
after the filling of the zone, it remains all the
--- In kicad-users@yahoogroups.com, Jaime Silva jaimonosi...@... wrote:
Hello!
Does anyone on this list has an Arduino Duemilanove shield footprint with
it's connectors and holes that can share?
I uploaded a basic Arduino shield schematic component and PCB module to the
Library folder in
--- In kicad-users@yahoogroups.com, kajdas kaj...@... wrote:
But you always need to have the vias/nodes connected with traces first.
Not with the most recent release. If a net is first selected when laying out a
zone then the fill will add connections (using thermals) to pads that are part
of
--- In kicad-users@yahoogroups.com, Dr.WhoDr.Who paulgusci...@... wrote:
I am just starting to think about using KiCAD for capturing some small
circuit designs so that I can create nice printed documentation.
For initial prototypes, and when I expect that I will only create one
unit as a
--- In kicad-users@yahoogroups.com, stefaca666 stefaca...@... wrote:
in place where are 2 wires are cross in 90degre angle I want to fill like in
picture. how?
As Robert mentions, it's pretty easy to do this by making a small turn in the
track from the pad as it reaches the perpendicular
--- In kicad-users@yahoogroups.com, acidb...@... sunblast...@... wrote:
Hi there !
I'm trying to do a board for the Atari Punk Synth.
Im doing the schemtaic but ive' run into a snag of sorts.
I need to use a LM556 chip, dual timer, but i can't find it in the
libs.
Im running Unbuntu 9.04,
--- In kicad-users@yahoogroups.com, Frédéric COIFFIER frederic.coiff...@...
wrote:
Hello !
I can use your arduinoshield.lib in schematic but how can I use
arduinoshield.emp ? PCBnew doesn't seem to recognize it.
In the Module Editor, from PCBNew, open your local module library (or
--- In kicad-users@yahoogroups.com, gayphil78 gayphi...@... wrote:
I'm not developper and can't say if difficult or not to do . I'm sure even
an external app giving dxf2brd file loadable in the drawing layer by kicad
would be great . Not an obligation to implement inside Kicad ... We just
The file (dxflib_commercial_license.txt) that give some info on
dxflib licence in the downloaded dxflib was very unclear.
In fact the dxflib site is unclear and very poor about the license:
The dxflib license appears only in a FAQ ...
Yes, it is indeed rather vague on their website. However,
--- In kicad-users@yahoogroups.com, seroxatmad seroxat...@... wrote:
Hi
I am after plotting my schematic to a HPGL file so i can import it into front
panel designer.
Is there anyway to disable the sheet border?
There is if you print instead of plot. For both schematics and boards there
20 matches
Mail list logo