Where would you place the carb temp sensor (type K) in an MA-3SPA carb? I
notice a lead plugged orifice in the main body (bowl) just under the Venturi
and another whole in the throttle place assembly just under the throttle plate.
I assume I must melt the lead out and should find a threaded
Yep. I think that's known as finishing tissue, it's not a cloth or a weave
and you could hardly call it a matt but that what it is. So thin however you
can see clean through it. I used a strip of light cloth about 6" wide along
my ply joins, tissue over the top throughout and just a little filler
I have always called it deck cloth and use it over all my glass surfaces.
My Panther Building Documentation at PantherBuilder Web Site
Daniel R. Heath -?Lexington, SC
-Original Message-
Yep. I think that's known as finishing tissue, it's not a cloth or a weave
and you could hardly call
Excellentes fotos Eduardo;
Gracias. Quisimos estar presente pero no se pudo.
Tal vez en la proxima.
Marc Baca
Chino, CA
On Saturday, October 18, 2014 6:58 AM, Eduardo Barros via KRnet wrote:
http://www.krnet.org/newsletter/
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
Just go to www.krnet.org it's down a little ways..
Paul Visk
Belleville Il
618 406 4705
Sent on the new Sprint Network from my Samsung Galaxy S?4.
Original message From: piney--- via KRnet
Date:10/18/2014 10:26 AM (GMT-06:00)
To: krnet at list.krnet.org Subject: KR>
https://plus.google.com/u/0/photos/112613184808826598140/albums/6070810544276891217?authkey=CLj90ZGI5NmvCQ
https://www.youtube.com/watch?v=sW4EUWki9JE
Saludos
Eduardo Barros
San Pedro, Bs. As., Argentina
Mail: eduardo at kr2-egb.com.ar
Visite el proyecto de construcci?n del avi?n experimental
Hi;
I was thinking of trying to do the downloads referenced previously but
inadvertently deleted the info so if someone could re post that link I would
appreciate it.
Thanks
Bob R
The problem noted with the canopy handle sounded a little picky at first
but it was the first indication that my KR might have a similar problem.For
years I had flown my KR with a canopy handle that protruded about an inch
and 2 inches long in the slipstream.Never noticed any problem until I read
Take a look at Tony Bingelis's books. In one of them (either the
Sportplane Builder or Sportplane Construction Techniques), he discusses
protecting wooden planes with an extremely light fiberglass that winds up
hardly heavier than several coats of paint.
Mike Taglieri
On Tue, Oct 14, 2014 at
10 matches
Mail list logo
