Hi guys,
I want to install the lower engine cowling with a hinge to the firewall. I want
to do this with small AN bolts thru the firewall. My problem is...you need very
wide hinges not to damage the frame frome the Side wall from the fuselage by
instelling the bolts.
Or do you all used screws And
hi kr family,
I am happy to tell you that our prop irrived.
Now I can finish the engine cowlings.
Have fun.
Stef.
Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2
-- next part --
A non-text attachment was scrubbed...
Name: IMG_6109.JPG
Every body thanks for the relplays. I havent heard anybody about the Garmin g3x.
Sombody experiance with the Garmin?
Stef
> Op 23 november 2016 om 15:31 schreef Jeff Scott via KRnet
> :
>
>
>
> ?
> Wow. I fixed the iFly glare issue for less than $5 and 10 minutes of my time
> to trim a
Hi kr friends
I am bussy with my engine cowling and finalise everything for the engine. The
prop wil be next month arrive so we are making progress.
In a few months in need to make a final decission about the efis I need to
install.
I made my mind up for the Garmin g3x, but this one cant measure
Great news, Congrats!
Do you have some pics of the first?
Stef
> Op 29 oktober 2016 om 7:10 schreef Jeff Scott via KRnet
> :
>
>
> We have another KR PILOT! Congrats!
>
>
>
> >
> > I hope this goes through, I haven't seen any KRnet emails in three or four
> > days.
> >
> > I finally flew
Hi pioneers,
Very quiet on the net, everybody is flying or building...,
I have a question.
I have seen someone from the KR group used scat ducting at the Exhaust, just
from the cylinders , I cant find it, and will it work?
Stef
Steph and his dad are building the KR-2S see
Hi Joe,
We have save And easy system to lock the canopy, we Copied it from the PH-KRS
I am sure it will work at your canopy to.
See canopy lock at my website.
Stef
> Op 18 oktober 2016 om 20:36 schreef Steven Bedford via KRnet
> :
>
>
> Joe wrote:
>
> Hey Guys,
> "Life almost got in the
Good story. Keeps up the spirit to finish our project.
Next mont my propeller will be deliverd, so I can start with the engine
cowlings.
Yesss live is good!
Stef
> Op 25 september 2016 om 0:57 schreef Larry Flesner via KRnet
> :
>
>
>
> I made a short (by KR standards) flight of 75 miles today
Hi Stan,
We use the old type landing gear. It is all 7075T6 alluminium. 3 brackets aft of
the fwd spar. I think this one give you more propclearce.
I think the aluminium gear is more weight than the new glass system.
On my website you see 3 KR2s. The PH-OMI and the PH-MIJ uses the old
Hi KR friends.
After the paint job we installed the engine mount and introduced our kr2 with
his new friend" the BMW engine" so last week we did a pre weight and balance to
check the engine mount.
I made the engine mount after a lot of calculation and assistance from some of
the krnet friends.
Hi Stefan
Whe bought
http://www.aircraftspruce.com/catalog/elpages/navstrobeac-ws-45w-1350.php?clickkey=3920
It is not yet installed but I testen it.It looks like nothing, very light
but also very bright And very cheap.
Stef
> Op 14 augustus 2016 om 18:27 schreef S via KRnet :
>
>
>
hi,
To install the engine mount on the firewall I have to install according drawing
a L shaped .125 thickness. On the drawing I cant find the lengt of this L
profile. Do I install it over the full lengt of the upper shelf? I think it is
better to install 2 L shaped profiles so you connect the
Every body thanks for the responce, I will go for straight.
Thanks.
Stef
> Op 16 juli 2016 om 14:36 schreef Larry Flesner via KRnet
> :
>
>
> At 09:43 PM 7/15/2016, you wrote:
> >I fretted over this, but set it up for straight ahead, just in case
> >I changed to an O-200 later.
>
hi guys,
What is the experience from the people who are flying with 110 hp Or more?
Should I do 3 degrees offset or is there no reason to do this?
Thanks Stef
Joe,
We get very inspired by a red rv-6, I know there are a lot look a likes, but
this striping at a kr2s is more nice than on a RV ha ha.
Stef
> Op 25 juni 2016 om 18:39 schreef bjoenunley via KRnet list.krnet.org>:
>
>
>
>
> How did you choose you paint design??
>
>
> Joe Nunley?CW2
Hi gys.
I am so happy I can tell you that we finshed the fu*+^% sending. After 3 days we
are finished with the painting.
So happy with the result.
Stef
Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2
-- next part --
A non-text attachment
Hi,
Welkom to the net. Great to hear the family is grooing in europe. Keep us
informed.
Stef
Rotterdam / Netherlands.
> Op 19 juni 2016 om 19:26 schreef Alain Zen via KRnet list.krnet.org>:
>
>
> ?
>
> ?
>
>
>
>
>
> HI guys?!
>
> new member, one month, but looking at KR for so long
gt;
>
> Sent from my T-Mobile 4G LTE Device
>
> ---- Original message
> From: Stef den Boer via KRnet
> Date: 6/13/16 8:07 PM (GMT-05:00)
> To: KRnet
> Cc: Stef den Boer
> Subject: KR> Cable safe
>
>
Hi kr friends,
I need to order a calble safe
http://www.aircraftspruce.com/catalog/appages/cablesafe.php?clickkey=8218
The problem is aircraft spruce is out of stock and the manufactor company is out
of order or what ever. Is there some of you who has a new adres where I can buy
this item...
hi kr friends,
Just started with the fuel system. I need to protect the fuel line with some
fire sleeve. So I can by the one from arcraft spruce, 12 dollar a feet or some
stuf from ebay. Bestflex is the name a 14 dollar 3 feet.
20 matches
Mail list logo
