Here is what I did
http://kr2spacemodulator.blogspot.com.au/2014/01/kr2s-engine-mount-remanufac
ture.html
Paul Smith (Brisbane Australia)
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of dean choitz
via KRnet
What kind of steel what size and how thick
racing.
-Jeff Scott
Los Alamos, NM
> Cc: "dean choitz"
> Subject: KR> Motor mount
>
> What kind of steel what size and how thick are most engine mounts made out
> of I'm planning on using a Volkswagen and move it to the head about 3 to 4
> inches
Dean Choitz wrote:
> What kind of steel what size and how thick are most engine mounts
made out of?
Corvair mounts use .049" thick 5/8" round and square 4130 steel tubing.
Mark Langford
ML at N56ML.com
http://www.n56ml.com
Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of dean choitz
via KRnet
Sent: Friday, May 15, 2015 1:09 PM
To: krnet at list.krnet.org
Cc: dean choitz
Subject: KR> Motor mount
What kind of steel what size and how thick are most engine mounts made out
o
-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of PatS
Sent: Wednesday, February 16, 2011 7:10 PM
To: KRnet; Corvair Forum
Subject: KR> Motor mount
Guys:
Not too long past someone posted that they had made a motor mount for a
Corvair to mount on a harbor frei
Guys:
Not too long past someone posted that they had made a motor mount for a
Corvair to mount on a harbor freight engine unit. I have one and would like to
have that info. Please contact me off net. Thanks. psh...@bayspringstel.net
IHS
PatS
Seminary, MS
Hi gang,
I tried to check the archives but couldn't find the
post I was looking for. Some time ago somebody made a
motor mount that they had set up on a trailer for a
Corvair as a test run bed. I wanted to make something
like that and instead of re-inventing the wheel, if
anyone has photos and
Ray Fuenzalida wrote:
> I tried to check the archives but couldn't find the
> post I was looking for. Some time ago somebody made a
> motor mount that they had set up on a trailer for a
> Corvair as a test run bed. I wanted to make something
> like that and instead of re-inventing the wheel, if
I have digital photos of the VW plans build mount and stand that I have
offered free. I will e-mail them direct to anyone that contacts me off the
net. I had a call to get the stand, but the person never came.
Larry Severson
Fountain Valley, CA 92708
(714) 968-9852
lar...@socal.rr.com
9 matches
Mail list logo