you
any scientific evidence to support my statement but it so light, its almost
like working with air if that makes sense.
Jeff York
KR-2
--- On Mon, 2/15/10, MICHAEL SYLVESTER wrote:
From: MICHAEL SYLVESTER
Subject: KR> Slick finnish.
To: "KRNET"
List-Post: krnet@list.k
I wouldn't put anything on dry. It leaves you open to air pockets under the
finish which causes bubbles in the paint later on. Peel ply works and helps
remove excess resin.
--- On Tue, 2/16/10, Dan Heath wrote:
From: Dan Heath
Subject: RE: KR> Slick finnish.
To: "'
0:03 PM
To: KRnet
Subject: Re: KR> Slick finnish.
Here is a system you may want to consider:
http://curedcomposites.netfirms.com/finish.html
Mark Jones (N886MJ)
Stevens Point, WI
E-mail: flyk...@charter.net
Web: www.flykr2s.com
- Original Message -
From: "MICHAEL SYLVESTER&q
At 09:39 PM 2/15/2010, you wrote:
>Hey Guy's, I finally have the wings covered with foam and am looking
>forward to glassing them asap(which is always a month longer than I
>had planned.) Is peel ply the way to go for a slick finish and why
>is there not a good web site for the cosmetics on the
I like peel ply. I know it works. If the micro does not wet out, then it
will just flake off and you will not have accomplished anything. A quick
test on a small piece should tell the tale. Not sure about the "lighter"
either as peel ply actually sucks up excess resin, but I will bet we are
tal
2010 9:39 PM
Subject: KR> Slick finnish.
Hey Guy's, I finally have the wings covered with foam and am looking forward
to glassing them asap(which is always a month longer than I had planned.) Is
peel ply the way to go for a slick finish and why is there not a good web
site for the cosm
Hey Guy's, I finally have the wings covered with foam and am looking forward to
glassing them asap(which is always a month longer than I had planned.) Is peel
ply the way to go for a slick finish and why is there not a good web site for
the cosmetics on the KR ? The reason I ask is I attended a
7 matches
Mail list logo
