KR> RE: Oil

2009-10-17 Thread Phillip Matheson
In that engine I would use 30w Castrol or 30w Valvoline racing oil and change it every 25 hours. --- Everyone is different. VW Engines Australia insist on 40w Valvoline change it every 25 hours for my Type 4 engine.They say it handles the head better

KR> RE: Oil

2009-10-17 Thread Phillip Matheson
Sorry did not check the spelling should read 40w handles the HEAT better Phil Matheson SAAA Ch. 20 http://www.saaa20.org/ VH-PKR Australia EMAIL: phillipmathe...@bigpond.com KR Web Page: www.philskr2.50megs.com --- Search the KRnet Archives at

KR> Engine selection

2009-10-17 Thread Dubi Gefen
Hello KRnet Good time to buy engine and I would like to listen to yours opinion about the engines types. I am looking engine to install in my beard. The engine must be: About 100HP, Air cooling, Without gear, Ready for installation, Extension to engine axis, Can be rebuild, About

KR> Engine selection (change a little from the previous)

2009-10-17 Thread Dubi Gefen
Hello KRnet 17-10-2009 Good time to buy engine and I would like to listen to yours opinion about the engines types. I am looking engine to install in my beard. The engine must be: About 100HP, Air cooling, Without gear, Ready for installation, Extension to engine axis, Can be

KR> (no subject)

2009-10-17 Thread robert clark

KR> See this

2009-10-17 Thread Willie van der Walt
http://www.avcom.co.za/phpBB3/viewtopic.php?f=1=40557=627548=627548

KR> (no subject)

2009-10-17 Thread robert clark
I have been using Castrol Syntec 10w30 synthetic in my Kr2 with 2180 GP For 500 hour. The engine runs great! I used Regular 30 W for the breakin of 20 hours. Bob Clark Kr2 Ankeny Iowa

KR> Elevator length 2

2009-10-17 Thread bdazzca...@aol.com
Well I went with Mark's AS5046-75 tail airfoil. But someone said to use some balancing tabs on that as well for more stability. I left my rudder to the size for the AS5046-75 airfoil as well but if I can get better performance with changing it let me know. With my KR I widened it 10" and