From: "Mike T"
List-Post: krnet@list.krnet.org
Date: Tue, May 6, 2014 10:03 pm
Subject: KR> Good news
To:
My wife called me and said I got a letter from the FAA. I finely got my
medical certificate. It's a one year but that's fine. Now I can build my
plane and not have that thought in the back of my head that I my not even get
to
fly it.
For right now I can go rent a $125.00 an hour 172. : (
Jeff,
Congratulations!!! Glad to hear you'll be an ongoing member of the
KR community. See you at the Gathering.
Larry Flesner
Jeff
Congratulations on the new job.
Jack Cooper
- Original Message -
From: "Jeff York"
To: kr...@mylist.net
Sent: Saturday, February 13, 2010 1:44:21 PM GMT -05:00 US/Canada Eastern
Subject: KR> Good News, Great News, "OK its not open Friday"
I just wa
I just wanted to pass along some great news and thank yous to those of you who
have been so encouraging.
As some of you may know, I have had my KR2 for sale and the reason for the sale
was due to the unfortunate demise of my marriage a few years ago, and the loss
of my job several months ago.
and lousy mechanic. The mechanic of N64KR, that is. (ME). The problem with
my Lo to No compression was a very poor valve adjustment. I have stainless
valves, and hope that the hour that the engine has run on that bad valve
adjustment, did not damage the exhaust valves. I failed to insure that t
t.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Dan Heath
Sent: Saturday, September 23, 2006 1:01 PM
To: kr...@mylist.net
Subject: KR> Good News
and lousy mechanic. The mechanic of N64KR, that is. (ME). The problem with
my Lo to No compression was a very poor valve adjustment. I have stainless
val
Netheads,
The good news it that after two years of not working on my KR (job changes
new business start-up blah blah blah) this weekend I took some acton. When
I left off working on N52BL I was finishing up firewall forward so I could
take off the engine and finish up the boat. Specifically, th
Can it be ground on a grinder instead of cut with a carbide cutter?
- Original Message -
From: "Bob Lee"
To: "KRnet (E-mail)"
Sent: Sunday, September 17, 2006 7:26 AM
Subject: KR> Good-news-bad-news
> Netheads,
>
> The good news it that after two ye
Well, netters, I get my engine back tomorrow. New rod bearings, heads
checked and valves lapped in, and freshly put together. I will finish the
assembly tomorrow night and be ready to put her back on the plane on Friday.
And, just for grins, I am adding a remote oil filter. Who knows, if it
doe
Bob Glidden
Eminence,Indiana
KR2S N181FW (building)
Corvair 110
glid...@ccrtc.com
I might be flying by Memorial day.
Way to go Dan good luck and happy flying...
Behalf Of Dan Heath
Sent: Wednesday, May 24, 2006 6:33 PM
To: kr...@mylist.net
Subject: KR> Good news
Well, netters, I get my engine back tomorrow. New rod bearings, heads
checked and valves lapped in, and freshly put together. I will finish the
assembly tomorrow night and be ready to put
I just got back from my stress test at NKC hospital and passed again. Needed
159 beats/minute on the tread mill based on my age of 65 years. I had a
quad by-pass in 1993.
Every year since I've passed the dreaded stre Testt.
It's costly, but it's worth it from my perspecti
Rnet'"
Sent: Monday, December 05, 2005 1:05 PM
Subject: KR> Good News again
>
> I just got back from my stress test at NKC hospital and passed again.
Needed
> 159 beats/minute on the tread mill based on my age of 65 years. I had a
> quad by-pass in 1993.
> Every yea
14 matches
Mail list logo
