KR> Smooth Prime problems

2016-08-13 Thread Doran Jaffas
I have the Stewart Systems DVD instruction set. I plan on using it on my Tri Pacer in a cpl of years. School of Missionary Aviation Training at Y70 uses it exclusively. I looked at several systems and I like Stewarts the best. Great Luck to You!! Doran Jaffas Rob wrote: ... My

KR> Smooth Prime problems

2016-08-13 Thread Paul Visk
?Rob wrote: ... My 1st finish paint job was sprayed on using a "Boat" acrylic enamel.? That didn't last. My second paint job was Stewart Systems and it seems to be holding up much better (rolled on). A reminder to everyone. ?Stewart Systems will be doing a forum Saturday morning

KR> Smooth Prime problems

2016-08-11 Thread rbaalman at cox.net
> > Several weeks ago, Mike Sylvester posted an email about the problem he had > > sanding the parts had previously primed. > > I found it good stuff. Use credit card to squeegee first coat to fill > holes. Roll or spray several thin coats after that. Like they say, a > thick coat is a

KR> Smooth Prime problems

2016-08-11 Thread Rob Schmitt
et-bounces at list.krnet.org] On Behalf Of Roger Baalman via KRnet Sent: Thursday, August 11, 2016 7:29 AM To: KRnet Cc: rbaalman at cox.net Subject: Re: KR> Smooth Prime problems > > Several weeks ago, Mike Sylvester posted an email about the problem he had sanding the parts had previou

KR> Smooth Prime problems

2016-08-11 Thread Daniel Heath
I used it on the Black Bird. Never again. See N64KR at http://KRBuilder.org - Then click on the pics 2016 KR Gathering - Mt. Vernon, Ill. Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il - MVN

KR> Smooth Prime problems

2016-08-11 Thread Paul Visk
/10/2016 10:15 PM (GMT-06:00) To: KRnet Cc: Gary Subject: Re: KR> Smooth Prime problems On 8/10/2016 7:53 PM, Pete Klapp via KRnet wrote: > Netters > > Several weeks ago, Mike Sylvester posted an email about the problem he had > sanding the parts had previously primed. What

KR> Smooth Prime problems

2016-08-10 Thread Gary
On 8/10/2016 7:53 PM, Pete Klapp via KRnet wrote: > Netters > > Several weeks ago, Mike Sylvester posted an email about the problem he had > sanding the parts had previously primed. What form of Smooth Prime was he > referring to? The earlier version was a catalyzed formula and the present >