What is a good temp to form plexiglass for my lens covers for my landing
lightsLee Van Dyke
Mesa AZ
l...@vandyke5.com
From: KRnet
List-Post: krnet@list.krnet.org
Date: 07/05/04 21:26:12
To: KRnet
Subject: KR> forming plexiglass
What is a good temp to form plexiglass for my lens covers for my landing
lightsLee Van Dyke
Mesa AZ
l...@vandyke5.com
___
to UNsubscribe fro
thank you the rapid response
- Original Message -
From: "Dan Heath" <da...@alltel.net>
To: <kr...@mylist.net>
Sent: Monday, July 05, 2004 8:45 PM
Subject: Re: KR> forming plexiglass
> 220 degrees.
>
> "There is a time for building and a time
The temps shown are accurate based on Oven and Candy Thermometer readings.
Your ideal forming temps will be 320 to 340 indicated.
250?F - Plexiglas bends, but cools and bounces back to easily
* 320?F - Plexiglas becomes workable and will not spring back - form your
part
t; <kr...@mylist.net>
Sent: Monday, July 05, 2004 10:00 PM
Subject: KR> forming plexiglass
> The temps shown are accurate based on Oven and Candy Thermometer readings.
>
> Your ideal forming temps will be 320 to 340 indicated.
>
> 250?F - Plexiglas bends, but cools and boun
At 06:24 PM 7/5/2004 -0500, you wrote:
>What is a good temp to form plexiglass for my lens covers for my landing
>lights
I got a product from Home Depot called Crystalite (??) that ran about $1.75
for 11x14". It started drooping at 250 degrees in about 5 minutes. I took
it out and finished
Larry said,
I got a product from Home Depot called Crystalite (??) that ran
about $1.75
for 11x14". It started drooping at 250 degrees in about 5 minutes.
___
That wasn't plexiglass ( methyl metacrylate), it was a styrene
product, with poor scratch resistance
7 matches
Mail list logo