KR> Wiring

2018-02-18 Thread Rick Cochenet via KRnet
I am putting back together a KR2 and am looking for basic wiring diagram using Rev Master VW conversion engine... Sent from my iPhone ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet i

Re: KR> Wiring

2018-02-18 Thread Mark Langford via KRnet
On 2/18/2018 11:21 AM, Rick Cochenet via KRnet wrote: > I am putting back together a KR2 and am looking for basic wiring diagram using Rev Master VW conversion engine... What kind of ignition system do you have? Electric fuel pumps? That's the majority of the engine electrical system, and wo

KR> Found it. Piano Hinge undersized pins

2018-02-18 Thread Daniel Heath via KRnet
Expensive is not the word for it, but if you need it, check it out. I got it from supp...@homebuilthelp.com https://www.mcmaster.com/#ptfe-coated-wire/=1a5xl4b My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC

KR> sometimes so obvious ...isn't

2018-02-18 Thread n357cj via KRnet
Hi Guys, Last Memorial Day I removed my corvair from N357Cj with about 925 hours on it. The reason was that I have had an oil leak for years that wasn't terrible as a total loss of oil. Just about a quart every 15 hours. I knew what it was... a crack in the block in front of #5. last winter it g

Re: KR> sometimes so obvious ...isn't

2018-02-18 Thread Mark Langford via KRnet
Joe Horton wrote: >>Mark L. suggested that I swap plugs just for laughs since they were all brand new. Instead of swapping i just grabbed another new one and gaped it and installed it. I jumped in and gave her a start up. It was incredible. She fired up fast and just sat there purring away.<<

KR> type 2 volkswagen engine

2018-02-18 Thread Dean Choitz via KRnet
i have a type 2 volkswagen engine was going to use in my kr 2 am going the o200a way am going to get the volkswagen to a new home. hapi case bosch starter 94 mm jugs pistons great plains dual plug heads i believe slick magneto 4216 rh 69 mm crank 52x46 almost constant speed warnke prop electroni

Re: KR> Found it. Piano Hinge undersized pins

2018-02-18 Thread Mike T via KRnet
Is this so expensive because it's Teflon coated, and if so why do you need that? On Sun, Feb 18, 2018 at 4:50 PM, Daniel Heath via KRnet < krnet@list.krnet.org> wrote: > Expensive is not the word for it, but if you need it, check it out. I got > it from supp...@homebuilthelp.com > > > > https://