Well that is two of you suggesting this as a possible cause and although
I have been using this pricker for several years I have had a new pin
put in and it is further in than before. Better for some things in
preparing patterns but I wonder if the part of the pin in use is thinner
than before. It would be a good idea to check this out I think. Thank
you for you input:-)
Sue T Dorset UK
Leonard Bazar wrote:
Another cure, from Mrs Perryman among others, so fine for Honiton, is to make
sure the needle in your pricker is large enough - I assume you are using a
pre-pricked pattern. She recommends a size 8 for the standard 0.55mm pins.
This does need a properly stuffed pillow if you're using a straw one, but there
should be no problem with a polystyrene (or styro-whatever) one. Some 19th
century parchments have quite large pinholes, so presumably the workers relied
on the pillows to hold the pins - after all, that's what happens in freehand
lace! If you are pricking as you go, it might help to use a pricker with a
comfortable handle and pre-prick a few holes with it and then place your pins
as you work.
[EMAIL PROTECTED]
-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to
[EMAIL PROTECTED]
-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to
[EMAIL PROTECTED]
