On Sun, 11 Oct 2015 20:10:26 +, Mark Morgan Lloyd
wrote:
>>> to your /etc/fpc.cfg, or for Jessie add
>>>
>>> -Fl/usr/lib/gcc/arm-linux-gnueabihf/4.9
...
>> Where in the file do I add this line?
>> Or does it not matter?
>
>If it mattered, I'd have said :-)
Mark Morgan Lloyd wrote:
wkitt...@windstream.net wrote:
Warning: "crtbegin.o" not found, this will probably cause a linking
failure
Warning: "crtend.o" not found, this will probably cause a linking
failure
Why does this happen? And what can be done about it?
I /think/ that somebody pointed
wkitt...@windstream.net wrote:
On 10/10/2015 03:13 PM, Bo Berglund wrote:
I have successfully compiled and installed fpc and lazarus from trunk
sources retrieved by svn on a Raspberry Pi2 unit.
Versions are 3.1.1 and 1.5 respectively
I can run Lazarus in the RPi2 and simple programs that I have
On Sun, 11 Oct 2015 11:48:55 +, Mark Morgan Lloyd
wrote:
>> I /think/ that somebody pointed out elsewhere that those were spurious,
>> but I'd need to check.
>
>If it causes issues then for Wheezy 2015 try adding
>
>-Fl/usr/lib/gcc/arm-linux-gnueabihf/4.6
>
Bo Berglund wrote:
On Sun, 11 Oct 2015 11:48:55 +, Mark Morgan Lloyd
wrote:
I /think/ that somebody pointed out elsewhere that those were spurious,
but I'd need to check.
If it causes issues then for Wheezy 2015 try adding
I have successfully compiled and installed fpc and lazarus from trunk
sources retrieved by svn on a Raspberry Pi2 unit.
Versions are 3.1.1 and 1.5 respectively
I can run Lazarus in the RPi2 and simple programs that I have tested
work as expected.
But nevertheless on every single compile there are
On 10/10/2015 03:13 PM, Bo Berglund wrote:
I have successfully compiled and installed fpc and lazarus from trunk
sources retrieved by svn on a Raspberry Pi2 unit.
Versions are 3.1.1 and 1.5 respectively
I can run Lazarus in the RPi2 and simple programs that I have tested
work as expected.
But