inal Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michael A.
Litscher
Sent: Friday, December 14, 2007 10:22 AM
To: Little CMS Mailing List
Subject: Re: [Lcms-user] Lab to RGB not yielding expected values
Marti,
Thank you for replying.
I did attempt to apply a sca
Marti,
Thank you for replying.
I did attempt to apply a scaling factor to the L* value as I was feeding
the L*a*b* values into lcms for conversion to RGB after reading the
replies of Kai-Uwe and yourself. I found that no matter what scaling
factor I used, all it changed was which swatches had the
Hi,
Kai-Uwe is right, ICC absolute intent does not account for intensity,
that would
be the CIE-absolute. There is a tag for obtaining such values, but lcms
does not
support that (nor any other CMM I'm aware of)
Regards
Marti
Quoting Kai-Uwe Behrmann <[EMAIL PROTECTED]>:
> Am 08.12.07, 18:36
I am not doing any scaling at all. I am leaving all of the math up to
Little CMS, which is my purpose for using it.
I know from experience that a 1.5 delta E is subtle. The difference in
RGB values (displayed RGB versus lcms RGB calculated from measured Lab)
that I am seeing are 6+ delta E off, wh
Am 08.12.07, 18:36 -0600 schrieb Michael A. Litscher:
> The short version:
>
> The issue I am having is that if I display an RGB value on the screen
> and measure it's Lab value, I should be able to feed that Lab value into
> LCMS, along with the monitor's profile, and get the original RGB value,
