Hi, how everybody is doing?:
I am having some problems trying to set a vlan with
the Bering rc4 distribution. I going to explain what I
did it and how, to see if anyone can find the problem
or the mistake, because I think I am following the
documentation pretty good.
Here, this is a draw of
Jose
I do not understand much about bridges, so I am surprised that you would
assign the same subnet 192.168.1.x on the eth1 adapters on both bridges.
I do not know how this could work so please someone enlighten me.
How could you prevent address collisions ths way?
Erich
At 09:02 24.06.2003
On Tuesday 24 June 2003 02:02 am, Jose Luis Abuelo Sebio wrote:
[...]
First I assign an IP address to each NIC
BridgeA
eth0 10.0.1.1
eth1 192.168.1.1
eth2 192.168.2.1
and I set them up with the command Ifconfig
Ifconfig eth0 up
Ifconfig eth1 up
Ifconfig eth2 up
(To do this I had to
I'm using a P75 w/ 32mb ram and 2 3Com509 cards to try and setup a Bering
1.2 router box. I have one computer (a laptop w/ PCMCIA ethernet card)
attached to eth1 via a crossover cable, and I can't ping back and forth to
the router, or connect to the weblet, the ethernet card lights come on but
On Tuesday 24 June 2003 15.09, Somerlot, Chris wrote:
I'm using a P75 w/ 32mb ram and 2 3Com509 cards to try and setup a
Bering 1.2 router box. I have one computer (a laptop w/ PCMCIA
ethernet card) attached to eth1 via a crossover cable, and I can't
ping back and forth to the router, or
I have been successful in doing fdisk, mke2fs and mkswap the /dev/hda*
partitions but gets an error when I issue the swapon
command.
Any Bering 1.2 utils some where for that. By the way, I used toms
floppy for the setting the partitions.
Thanks
On Tue, 24 Jun 2003, Somerlot, Chris wrote:
I'm using a P75 w/ 32mb ram and 2 3Com509 cards to try and setup a Bering
1.2 router box. I have one computer (a laptop w/ PCMCIA ethernet card)
attached to eth1 via a crossover cable, and I can't ping back and forth to
the router, or connect to the
Bering 1.2 in a Net4501 Soekris box.. Loading natsemi.o gives me:
# insmod natsemi
Using /lib/modules/natsemi.o
insmod: unresolved symbol pci_drv_unregister
insmod: unresolved symbol pci_drv_register
Looking at modules.dep, it doesn't look like it relies on anything else..
---
The Bering 1.2 pcmcia_orinoco.lrp does not include a wireless.opts file,
nor an option to edit that file.. Has that functionality been moved
someplace else?
---
Homer Parker /\ ASCII Ribbon Campaign
\ / No HTML/RTF in email
Hello Homer,
are you sure you got the correct modules.
in my modules on a 2.4.20 pci_drv_register and pci_drv_unregister are not
mentioned.
in the modules on a 2.2.20 they are. those are dependant of pci-scan.
So please check if you have the correct module. If so try installing
pci-scan
Greetings,
Have anyone succeeded in using WISP to build a
wireless Mesh Network ?
Newton
__
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
---
This SF.Net email is sponsored
On Tue, 24 Jun 2003 21:02:34 +0200 eric wolzak [EMAIL PROTECTED]
wrote
Hello Homer,
are you sure you got the correct modules.
in my modules on a 2.4.20 pci_drv_register and pci_drv_unregister are
not mentioned.
in the modules on a 2.2.20 they are. those are dependant of pci-scan.
--- Homer Parker [EMAIL PROTECTED] a écrit :
On Tue, 24 Jun 2003 21:02:34 +0200 eric wolzak
[EMAIL PROTECTED]
wrote
Hello Homer,
are you sure you got the correct modules.
in my modules on a 2.4.20 pci_drv_register and
pci_drv_unregister are
not mentioned.
in the modules on
On Tuesday 24 June 2003 04:25 pm, Bibinsa wrote:
[...]
Incredible ! I use Netgear FA311 (natsemi.o module)
and I don't have to use pci-scan.o
Very strange...
Kernel modules don't use pci-scan, but the Donald Becker
modules do. Different section of the 'modules tree'.
--
~Lynn Avants
Linux
Chris
please read this and provide the information requested there
http://leaf.sourceforge.net/mod.php?mod=userpagemenu=11page_id=4
thanks
Erich
At 06:09 24.06.2003 -0700, you wrote:
I'm using a P75 w/ 32mb ram and 2 3Com509 cards to try and setup a Bering
1.2 router box. I have one computer
15 matches
Mail list logo