Re: [leaf-user] essid and ip problem

2003-07-14 Thread Victor Berdin
Hello, >eth2 IEEE 802.11-DS ESSID:"" Nickname:"HERMES I" >Mode:Managed Frequency:2.422GHz Access Point: 00:00:00:00:00:00 >Bit Rate:11Mb/s Tx-Power=15 dBm Sensitivity:1/3 >Retry limit:4 RTS thr:off Fragment thr:off >Encryption key:off >Power Management:off >Link Quality:0/92 Signal le

Re: [leaf-user] ez-ipupdate

2003-07-14 Thread Tom Eastep
On Mon, 2003-07-14 at 15:52, PAGE,RAYMOND wrote: > ez-ipupdate won't work for me. Yes that's vague... > > When I run it manually, I recieve the following errors: > > connect: Connection refused > error connecting to members.dyndns.org:80 > > > In

[leaf-user] ez-ipupdate

2003-07-14 Thread PAGE,RAYMOND
ez-ipupdate won't work for me. Yes that's vague... When I run it manually, I recieve the following errors: connect: Connection refused error connecting to members.dyndns.org:80 Internet connectivity is not a problem. However I am curious about n

[leaf-user] Now On-Line but big trouble...

2003-07-14 Thread Michelle Konzack
Hello, I am using the older LRP 2.9.4 and now after creating my Router image for an analog modem it does not work correctly: Config: eth0NW 192.168.1.64 IP 192.168.1.65 BC 192.168.1.95 NM 255.255.255.224 IP-Masquerading active ppp0

[leaf-user] Re: can only ping assigned IP --> fixed!

2003-07-14 Thread RS Peterson
WoooWhooo! Celebration at my place. Bering is the winner! I can connect and ping everywhere. Major step forward. previous: With this suggestion, I think it's time to "cut & run" from EigerStein ---> Bering. You concur? Thanks for the help. Let me give it a try and I'll

Re: [leaf-user] copying files to your firewall.

2003-07-14 Thread Tony
I take it you don't have a floppy in the machine? Also, I don't have ssh on my box, but I do have sshd and I scp stuff to the box all the time. You can set it up to only listen to the internal interface. But, you seem to already know that. I think Jeff is right, if BBM (Big BossMan) don't want

[leaf-user] eagle.lrp for SAGEM F@ST 800 USB modem available

2003-07-14 Thread Jacques Nilo
If you want to connect your LEAF Bering router to the Internet via a DSL modem based on the Anolog chipset Eagle 8051. The Sagem [EMAIL PROTECTED] 800 modem as well as USRobotics DSL modems are based on this chipset. However, only the [EMAIL PROTECTED] 800 as been fully tested (thanks to Math

[leaf-user] essid and ip problem

2003-07-14 Thread Homer Parker
Bering 1.2, Orinoco silver cards in a Soekris Net 4501 box.. Having a problem getting the essid to work, and get an ip assigned to the radio :( Here's what I have: /etc/network/interfaces: auto lo iface lo inet loopba

Re: [leaf-user] copying files to your firewall.

2003-07-14 Thread Jeff Newmiller
On 14 Jul 2003, Charles Holbrook wrote: > I am currently running Bering Uclibc on a system that uses a CF Disk as > the boot media. This disk is inside of the case and thus updating any > software means pulling the system offline unracking it and opening the > box up. About 20 minutes worth of w

RE: [leaf-user] Orinoco card not coming up fully

2003-07-14 Thread Matt Russell
dave, i would also check to make sure that the wireless card is in the right mode (ad-hoc, manual, ap, etc...) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of David Mcguire Sent: Monday, July 14, 2003 8:03 AM To: [EMAIL PROTECTED] Subject: [leaf-user] Orinoco

[leaf-user] copying files to your firewall.

2003-07-14 Thread Charles Holbrook
I am currently running Bering Uclibc on a system that uses a CF Disk as the boot media. This disk is inside of the case and thus updating any software means pulling the system offline unracking it and opening the box up. About 20 minutes worth of work. Besides ssh does anyone have a secure means

Re: [leaf-user] Orinoco card not coming up fully

2003-07-14 Thread Erich Titl
Dave At 07:02 14.07.2003 -0700, you wrote: I've finally figured out the PCMCIA problems, the wireless files, and a few other "missing links" for my Bering 1.2 router, and now I'm down to the wireless card. Specs: eepro100 on eth0 orinoco gold on eth1 system booting from hd, other specs on hardware

[leaf-user] Orinoco card not coming up fully

2003-07-14 Thread David Mcguire
I've finally figured out the PCMCIA problems, the wireless files, and a few other "missing links" for my Bering 1.2 router, and now I'm down to the wireless card. Specs: eepro100 on eth0 orinoco gold on eth1 system booting from hd, other specs on hardware seem ok The machine comes up fine. I get

RE: [leaf-user] Re: Maybe LEAF should become a Debian mini-distribution?!

2003-07-14 Thread Stefaan Van Dooren
Ray, Gibraltar is still alive and kicking. I'm on their mailinglist and altough traffic isn't as much as overhere, it still has his followers. The current version of Gibraltar is 0.99.7a, published on 2003-04-28. http://www.gibraltar.at/ Stefaan -Original Message- From: [EMAIL PROTECT

Re: [leaf-user] Shorewall is completely incompatible with bridging

2003-07-14 Thread Jacques Nilo
If you want to use firewalling facilities within a bridge you will have to use ebtables.lrp http://leaf.sourceforge.net/doc/guide/bipack2.html#id2881716 http://ebtables.sourceforge.net/ In order to have ebtables working with Bering 1.2 you will have to replace the linux kernel and the kernel mod