On Tue, 2003-08-26 at 00:01, [EMAIL PROTECTED] wrote:
I upgraded my bering box 1.2 to shorewall 1.4.6b, to use a new config line
in masq configuration.
From shorewall.net documentation: [...] Beginning with Shorewall version
1.4.6,
you may include a range of IP addresses in this column to
Thanks Tom!
That was the problem.
All I had to do is go into my VPN settings and uncheck the use gateway of
remote network setting under TCP/IP and the problem went away.
I love this list.
Troy
-Original Message-
From: Tom Eastep [mailto:[EMAIL PROTECTED]
Sent: Monday, August 25,
Dear Dave.
pcengines's product is to plug a CF to an IDE based board.
What I need is to plug IDE to a CF based board.
Sincerely
-bino-
- Original Message -
From: Dave Hunt [EMAIL PROTECTED]
To: 'bino-psn' [EMAIL PROTECTED]; 'LEAF-USER'
[EMAIL PROTECTED]
Sent: Wednesday, August 27, 2003
On Wed, 2003-08-27 at 14:16, bino-psn wrote:
Dear Dave.
pcengines's product is to plug a CF to an IDE based board.
What I need is to plug IDE to a CF based board.
Hi Bino.
I have not seen such a device.
You might consider using a USB Hard Disk, and attach it with a CF-USB
converter, of which
Thanks Francoise
I found the problem. Somehow the ipsec.lrp that end up on my bering 1.2
boot
CD is the wrong version. The message I get is because that package does not
support ipsec port selector.
Thanks
Huy
- Original Message -
From: Francois BERGERET [EMAIL PROTECTED]
To:
On Wed, 2003-08-27 at 23:43, Erich Titl wrote:
Hi Bino
At 21:27 27.08.2003 +1200, Steve Wright wrote:
On Wed, 2003-08-27 at 14:16, bino-psn wrote:
Dear Dave.
pcengines's product is to plug a CF to an IDE based board.
What I need is to plug IDE to a CF based board.
What exactly do
