Dear All
Is there any clue/docs/url about handling whatever input received through
serial-com-port (tty ?)
I need to monitor the usage of PBX.
It'll be great if there is example on using BASH to monitor tty.
Sincerely
-bino-
---
This SF.Net
Hi all
I could not find any documentation about the relevan between BGP and the
size of capacity contract.
CMIIW that any one can request a /20 IP / AS-number allocation from the NIR
as long as they can fulfill all the condition, and AFAIK the most important
condition is about "usage plan" and "mul
Sangoma, Cyclades, Moxa
Basicaly .. any WAN card brand that come with open-source linux driver
Sincerely
-bino-
- Original Message -
From: "William Burns" <[EMAIL PROTECTED]>
To: "Peter Mueller" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Friday, April 23, 2004 10:01 AM
Subject: Re: [
my-rtr: ip ro add 255.255.255.255 dev $IF_Internal
-bino-
- Original Message -
From: "Mark Ivey" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, February 10, 2004 11:26 PM
Subject: [leaf-user] How do I route 255.255.255.255 to my internal network?
> I'm trying to set up the w
own /24 ip address
.. no chance for BGP
Sincerely
-bino-
- Original Message -
From: "Jeff Newmiller" <[EMAIL PROTECTED]>
To: "bino-psn" <[EMAIL PROTECTED]>
Cc: "leaf-user" <[EMAIL PROTECTED]>
Sent: Tuesday, January 20, 2004 4:30 PM
Subject: Re: [
Dear All ...
Because of some bad condition , I have to write many lines of static
address.
There is no chance to use such OSPF or BGP.
Is there a chance to summarize the route ?
What i need is just i.e : Combining 10.0.0.0/24 and 10.0.0.1/24 into single
10.0.0.0/23.
FYI .. curently the static rout
I never used Bering with HostAP mode in real live ..because it's hard to
find Prism-Based Card in indonesia.
But I used to run 4 wifi repeater.
I used bering and Zebra at each repeater.
Each bering box have 2 interface in it.
One interface is Orinoco Wifi Card ... facing a AP-1000 "center repeater"
H
My dirty wayout for traffic accounting is (My router is WISP with no
shorwall) :
1. Create Userdefined Chain for every ip-address to be monitored.
i.e for ip address of 192.168.0.2
--> iptables -N 02I --> prepared for inbound/download traffic
--> iptables -N 02O --> prepared for out
Dear Sir.
It works ...
Actualy my card's firmware is 1.7.x ... so i just "downgrade" the firmware
to 1.5.6
Thx for the help
Sincerely
-bino-
- Original Message -
From: "Vladimir Ivaschenko" <[EMAIL PROTECTED]>
To: "bino-psn" <[EMAIL PROTEC
Dear Jorn,
KIndly please do "ip addr" and "ip ro" paste the results to the mail.
Hopefully it can help other to analyze your problem
Sincerely
-bino-
- Original Message -
From: "Steve Wright" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, November 01, 2003 1:01 AM
Subject: Re
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 31, 2003 4:07 PM
Subject: [leaf-user] Strange Bering error
>
> I have a internal Leaf (Bering v1.2) box and when I try to add a route (ip
route add 10.254.0.2/24 via 172.26.1.1) this strange mess
Dear All.
I use wisp 2625 with Senao SL-2011CD/SL-2011CDPLUS card and a vadem based
PCMCIA-ISA-Bridge
Anad here is my condition
# lsmod |grep hostap
hostap_cs 81060 1
hostap 62032 0 (unused)
hostap_crypt_wep2656 0 (unused)
hostap_crypt1028
- Original Message -
From: "Ronny Aasen" <[EMAIL PROTECTED]>
To: "leaf" <[EMAIL PROTECTED]>
Cc: "AdStar" <[EMAIL PROTECTED]>
Sent: Tuesday, October 21, 2003 6:03 PM
Subject: Re: [leaf-user] Firewall load and shorewall accounting questions.
> only problem i have is that i have no idea how
Hi Mohan.
In Fact, I got first generation of Nagasaki's MS2000 Series in my hand for
year.
Nagasaki is my DOM supplyer.
Sincerely
-bino-
- Original Message -
From: "S Mohan" <[EMAIL PROTECTED]>
To: "bino-psn" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTE
Hi All
- Original Message -
From: "James Neave" <[EMAIL PROTECTED]>
To: "bino-psn" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, August 28, 2003 5:00 PM
Subject: RE: [leaf-user] LowCost Small Size x86 System
Hi,
Just to re-iterate.
Port is for the LAN and NetAdmin activity.
Sincerely
-bino-
- Original Message -
From: "James Neave" <[EMAIL PROTECTED]>
To: "bino-psn" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, August 28, 2003 3:51 PM
Subject: RE: [leaf-user] Be
Hi All,
Currently I have no CF-Based Board.
I just want to start playing with soekris, thats why i ask about pluging IDE
device (HDD,DOM, etc etc) to CF-Based board.
Sincerely
-bino-
- Original Message -
From: "Erich Titl" <[EMAIL PROTECTED]>
To: "bino-psn" <[
Dear All
Just exactly like Steve said.
And Eric .. Yes I got 10 or more Flash-IDE (a.k.a DOM) unused.
Sincerely
-bino-
- Original Message -
From: "Steve Wright" <[EMAIL PROTECTED]>
To: "Erich Titl" <[EMAIL PROTECTED]>
Cc: "bino-psn" <[EMA
Dear Dave.
pcengines's product is to plug a CF to an IDE based board.
What I need is to plug IDE to a CF based board.
Sincerely
-bino-
- Original Message -
From: "Dave Hunt" <[EMAIL PROTECTED]>
To: "'bino-psn'" <[EMAIL PROTECTED]>; "
Dear All.
I'm not familiar With CF.
I work with SS-IDE (Flash IDE), it's a full IDE with 40-pin interface but no
moving parts.
Is there any adapter so I can plug standard IDE device to a board that only
have a CF Interface ?
Sincerely
-bino-
- Original Message -
From: "Steve Wright" <[EM
Dear All.
I just download qos-htb.lrp
Try to load it on my bering box.
when i try to start it ...
it give error msg :
./htb.init: 636: Syntax error: Bad substitution
I look into that Line and it only contain blank-string variable assignment
as :
RNAME="";CNAME=""
Any Clue please ..
Sincerely
Dear All.
I need to make a tunnel between two boxes and they are "separated" by
internet
When i type : ip ro ls cache
I got :
64.75.241.10 from A.B.C.D dev dstream src A.B.C.Ecache
expires -196sec mtu 556 advmss 536 iif eth1
Is it the problem of MTU ?
What I have to do to fix this problem
Dear All.
I'm not too familiar with iptables.
Kindly please anybody send me the list of ip_option or iptables command that
potentialy blocking the ipip protocol ?
I build a tunnel (ipip) to a SuSe box, and looks like that box is blocking
this protocol.
I do "iptables -L" on that box and got a bunc
Hmmm
Try to change the MTU down to 576.
It work for me.
I'm using ipip-tunnel for building upstream tunnel between my node to my
one-way IP-Service provider in Hawaii.
Sincerely
-bino-
- Original Message -
From: "franco segna" <[EMAIL PROTECTED]>
To: "Mauro Cossi" <[EMAIL PROTECTED]>
You can try zebra.lrp.
It come with BGP , RIP and OSPF.
I used this for my multiple HotSpot network.
Sincerely
-bino-
- Original Message -
From: "Brett Stevens" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 11, 2003 7:08 AM
Subject: [leaf-user] Gated or routed
> Hi All
ynn Avants" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 03, 2003 12:52 PM
Subject: Re: [leaf-user] sql-Client Package.
> On Thursday 03 July 2003 12:19 am, bino-psn wrote:
> [...]
> > > I really doubt it as this is that last thing anyone would put on a
Hi Lynn
- Original Message -
From: "Lynn Avants" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 03, 2003 11:40 AM
Subject: Re: [leaf-user] sql-Client Package.
>
> I really doubt it as this is that last thing anyone would put on a
firewall/
> router which is what most of
Hi LEAFers.
Is there any one have a package (.lrp) of mysql-client libs and tools ?
Sincerely
-bino-
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Do
Hi ..
- Original Message -
From: "Stefaan Van Dooren" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 26, 2003 4:01 PM
Subject: [leaf-user] MicroPC
> Has anyone used one of these for LEAF ?
>
> http://www.norhtec.com/products/gp/index.html
>
> Stefaan
Dead link.
I cou
Dear All.
I got three people report to me that they always got duplicate packet when
the use DWL900AP for their network.
Sincerely
-bino-
- Original Message -
From: "Charles Steinkuehler" <[EMAIL PROTECTED]>
To: "Steve Wright" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, Ju
Note : This is OOT post
-
Dear All
To day April 4th (GMT+7)
Is my son's 1st birthday.
Why I post this msg to this list ...
Just because His (my son's) name is "Lintang Reka Pratama" Yes .. I
named him after LRP.
Sincerely, and apologize for
I use ip rule and extra ip route table (modified /etc/iproute2/rt_tables)
for long time.
For this to work, I've created a new script and put it in /etc/init.d
directory.
Don't forget about the RCDLINK.
Sincerely
-bino-
- Original Message -
From: "Tom Eastep" <[EMAIL PROTECTED]>
To: "Guille
Dear All.
Any body have a source or binary of starfire.o foir 2.2.16 kernel ?
AIC-6915 starfire --> Adaptec 4 port fast ethernet card
Sincerely
-bino-
---
This SF.net email is sponsored by:Crypto Challenge is now open!
Get cracking and regi
33 matches
Mail list logo
