> >I am a newbie to Linux firewall. I downloaded the Dachstein image and = >installed in a P100 PC with 64MB RAM and two Linksys Ethernet cards. = >Every thing works fine connecting to a DSL modem on one end and my home = >PC on the other end of the firewall box. > >I have two spare 3Com 3C509B-TPO Ethernet ISA cards. I want to add the = >3Com cards to the Linux firewall and have the one Linksys card and two = >3Com cards working as a Hub. This way I can have a local three = >computers network that can talk to each other and share one ISP IP = >address for Internet access.
That's what I use mine for, just add the cards, add the various ethxx entries to network.conf add the necessery subnets( because it is not a hub but a full fledged router). Don't forget the dhcpd process. It has to service all the subnets/interfaces. I have a cable modem uplink which works just like a bridge, while you probably have PPPoE uplink, but this makes no big difference. My set up is a an old Dell with a 3C509 on board, 2 3C905 on the ISA bus and a realtek based ne200 clone on PCI. It works fine off single floppy with 32 MB Memory. Erich _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user