[leaf-user] pppoe internet connection terminates -- howto restart/redial

I'm curious how to get pppd to auto redial when my connection dies. I searched the archives and I found this informative message: http://www.mail-archive.com/[EMAIL PROTECTED]/msg06709.html which references this howto:

RE: [leaf-user] pppoe internet connection terminates -- howto restart/redial

I'm curious how to get pppd to auto redial when my connection dies. snipalot Just respawning the pppd is not sufficient, I had times when pppd ran and the ppp0 interface was visible but did not have an IP address. IMHO the pppd should be changed that so it never quits, doesn't run twice on the

[leaf-user] [ot] pcengines purchase pooling

Hi Folks Sorry it you consider this abusive, please don't flame.. slight commercial I am faced with the decision to buy a batch of small router hardware (the pcengines http://www.pcengines.ch/wrap.htm stuff I was flaming about lately on the developers list). Of course OEM prices vary a lot

RE: [leaf-user] pppoe internet connection terminates -- howto restart/redial

Alex At 09:02 11.12.2003 +0100, you wrote: I'm curious how to get pppd to auto redial when my connection dies. snipalot Just respawning the pppd is not sufficient, I had times when pppd ran and the ppp0 interface was visible but did not have an IP address. IMHO the pppd should be changed that

RE: [leaf-user] Re: PPPoE without username and password

I didn't think of this when you first posted. My ISP limits each cable modem to pulling 1 or 2 addresses at a time. If you don't know what was going on, you would swear your DHCP client or NIC was malfunctioning... - Bob Coffman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

[leaf-user] AVM Fritz!Card v2.x

Dear Bering friends, last time I have to Install Bering(kernel 2.4.20) on a computer with a AVM Fritz!Card. My self use also AVM Fritz!Card v1.0 it works without any problems. But with the Fritz!Card v2.x hisax doesn't found it. :( Can someone tell me what I can do? Thank you! Felix

[leaf-user] Necessary to comment out /var/lib/shorewall ?

Hi folks, I'm setting up a new Bering 1.2 firewall, and in my notes to myself I have a note to either remove (or in this case I simply commented out) the /var/lib/shorewall entry that is within the root.exclude.list file. Do I need to do this or just don't bother? Thank you, Craig

RE: [leaf-user] AVM Fritz!Card v2.x

Check the exact chipset the card uses. Maybe it is one of those Taiwan generic chipsets. -Original Message- From: Felix Theodor [mailto:[EMAIL PROTECTED] Sent: Thursday, December 11, 2003 3:33 PM To: USER LEAF Subject: [leaf-user] AVM Fritz!Card v2.x Dear Bering friends,

RE: [leaf-user] pppoe internet connection terminates -- howto restart/redial

At 09:02 11.12.2003 +0100, you wrote: I'm curious how to get pppd to auto redial when my connection dies. snipalot Just respawning the pppd is not sufficient, I had times when pppd ran and the ppp0 interface was visible but did not have an IP address. IMHO the pppd should be

Re: [leaf-user] pppoe internet connection terminates -- howto restart/redial

On Thursday 11 December 2003 12:56 pm, Alex Rhomberg wrote: At 09:02 11.12.2003 +0100, you wrote: I'm curious how to get pppd to auto redial when my connection dies. snipalot Just respawning the pppd is not sufficient, I had times when pppd ran and the ppp0 interface was

Re: [leaf-user] RESOLVED: port forwarding won't work with INTERN_SERVERS stmt (formerly Mail DNS behind Dachstein)

Folks, Here is what finally worked: ... EXTERN_UDP_PORT0 0/0 domain ... EXTERN_TCP_PORT0 0/0 www EXTERN_TCP_PORT1 0/0 smtp EXTERN_TCP_PORT2 0/0 imap EXTERN_TCP_PORT3 0/0 domain ... INTERN_SERVERS=tcp_216.12.w.z_domain_192.168.x.y_domain udp_216.12.w.z_domain_192.168.x.y_domain

RE: [leaf-user] Necessary to comment out /var/lib/shorewall ?

Is there a specific reason you can remember for attempting to comment out the shorewall entry? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Craig Caughlin Sent: Thursday, December 11, 2003 9:34 AM To: LEAF (LEAF) Subject: [leaf-user] Necessary to comment

[leaf-user] Bering IPSec

I'm planning a network as under on two WAN endpoints as a modification of an existing network: Internet Linksys Router Switch - Bering and LAN (10.0.1.x subnet) | +--- Wireless AP.(192.168.0.x subnet) The linksys router forwards ports for