Thanks for all the input. Apologies for the text and line length issue.
I hope this message is improved.
I tried the various suggestions with varying success:
1.tried using rtl8139 with 8390 without success (same signature as before)
2.tried HOSTS0 eth0_IPADDR ... instead of eth1_IPADDR without
On Wednesday 06 February 2002 07:32, Hall, Michael A wrote:
Thanks for all the input. Apologies for the text and line length
issue. I hope this message is improved.
I tried the various suggestions with varying success:
1.tried using rtl8139 with 8390 without success (same signature as
At 06:32 AM 2/6/02 -0700, Hall, Michael A wrote:
[...]
lsmod shows:
8390 (unused)
natsemi (used by 1)
8139too (used by 1)
pci-scan (used by 0 [natsemi])
Does this imply that 8390 is unnecessary?
Yes. I don't recall either of the actual NIC modules you use depending on 8390.o
It seems that
At 09:03 06/02/02 -0800, Ray Olszewski wrote:
At 06:32 AM 2/6/02 -0700, Hall, Michael A wrote:
Now I can proceed to try to get the Win machine applications to access the
outside world (mail, http, etc.). Is it necessary to enable these within
network.conf?
In general, no. snip For some
clarifications in-line
On Mon, 4 Feb 2002, hallm wrote:
I recently acquired cable internet service through ATT @Home. I =
currently lease their SURFBoard SB3100 cable modem. My intended
LEAF box = is a Pentium 120MHz with 16MB RAM, 1.44 MB floppy, 1
DLink DFE530TX+ = NIC, and 1
Jack Coates wrote:
On Mon, 4 Feb 2002, hallm wrote:
I recently acquired cable internet service through ATT @Home. I =
currently lease their SURFBoard SB3100 cable modem. My intended LEAF box =
is a Pentium 120MHz with 16MB RAM, 1.44 MB floppy, 1 DLink DFE530TX+ =
NIC, and 1
Jack and Mike:
I use the Netgear FA311 card and they use the natsemi driver. FA310 card
uses the Intel chip set. The FA311/ 312 cards use the National Semiconductor
chip set.
Robert Chambers
Jack Coates wrote:
[EMAIL PROTECTED]">
On Mon, 4 Feb 2002, hallm wrote:
I recently acquired
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Robert
Chambers
Sent: Tuesday, February 05, 2002 1:44 PM
To: Jack Coates; leaf; hallm
Subject: Re: [Leaf-user] Need help getting LEAF running
Jack and Mike:
I use the Netgear FA311 card and they use
I recently acquired cable internet service through
ATT @Home. I currently lease their SURFBoard SB3100 cable modem. My
intended LEAF box is a Pentium 120MHz with 16MB RAM, 1.44 MB floppy, 1 DLink
DFE530TX+ NIC, and 1 NetGear FA311 NIC. The BIOS is AMIBIOS 1.00.02.CB0. My
internal, windows
