[leaf-user] DWL 520 rev E

2006-04-30 Thread Jim Munro
Can’t get a DWL520 rev E device to work in LRP.  I have the following 
modules loaded,  hostap.o and hostap_pci.o and packages hostapu.lrp and 
wireless.lrp.  The device appears in ip addr and the interface pings from 
the LRP box but can’t get the radio to pass data.

bering 2.4
debug
Apr 29 20:59:39 firewall kernel: hostap_crypt: registered algorithm 'NULL'
Apr 29 20:59:39 firewall kernel: wifi0: Original COR value: 0x0
Apr 29 20:59:40 firewall kernel: hostap_pci: assuming no Primary image in 
flash

Apr 29 20:59:40 firewall kernel: wifi0: test Genesis mode with HCR 0x1f
Apr 29 20:59:40 firewall kernel: wifi0: Original COR value: 0x0
Apr 29 20:59:40 firewall kernel: Readback test failed, HCR 0x1f write 00 e1 
a1 f

Apr 29 20:59:40 firewall kernel: wifi0: test Genesis mode with HCR 0x0f
Apr 29 20:59:40 firewall kernel: wifi0: Original COR value: 0xa1
Apr 29 20:59:40 firewall kernel: Readback test succeeded, HCR 0x0f
Apr 29 20:59:40 firewall kernel: wifi0: registered netdevice wlan0
Apr 29 20:59:40 firewall kernel: wlan0: cannot set RID fc02 (len=34) - no 
PRI f/w
Apr 29 20:59:40 firewall kernel: wlan0: could not set interface UP - no PRI 
f/w


/etc/network/interfaces
auto wlan0
iface wlan0 inet static
   address 10.0.0.1
   netmask 255.255.255.0
   broadcast 10.0.0.255
   fw_primary /etc/firmware/hostap/pm010102.hex
   fw_secondary /etc/firmware/hostap/rf010800.hex
   wireless_mode ad_hoc
   wireless_essid jim
   wireless_channel 5

ip addr
3: eth0: BROADCAST,MULTICAST,UP mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 00:20:18:2c:1f:59 brd ff:ff:ff:ff:ff:ff
   inet 192.168.1.10/24 brd 192.168.1.255 scope global eth0
4: wifi0: BROADCAST,MULTICAST mtu 1500 qdisc noop qlen 1000
   link/ieee802.11 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
5: wlan0: BROADCAST,MULTICAST mtu 1500 qdisc noop
   link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
   inet 10.0.0.1/24 brd 10.0.0.255 scope global wlan0

iwconfig
lono wireless extensions.
dummy0no wireless extensions.
eth0  no wireless extensions.
wifi0 IEEE 802.11-DS  ESSID:jim
 Mode:Master
 Encryption key:off
wlan0 IEEE 802.11-DS  ESSID:jim
 Mode:Master
 Encryption key:off
 Link Quality:0  Signal level:0  Noise level:0
 Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
 Tx excessive retries:0  Invalid misc:0   Missed beacon:0

_
Don't just Search. Find! http://search.sympatico.msn.ca/default.aspx The new 
MSN Search! Check it out!




---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/


[leaf-user] DWL 520 rev E

2006-04-30 Thread Jim Munro
Can’t get a DWL520 rev E device to work in LRP.  I have the following 
modules loaded,  hostap.o and hostap_pci.o and packages hostapu.lrp and 
wireless.lrp.  The device appears in ip addr and the interface pings from 
the LRP box but can’t get the radio to pass data.

bering 2.4
debug
Apr 29 20:59:39 firewall kernel: hostap_crypt: registered algorithm 'NULL'
Apr 29 20:59:39 firewall kernel: wifi0: Original COR value: 0x0
Apr 29 20:59:40 firewall kernel: hostap_pci: assuming no Primary image in 
flash

Apr 29 20:59:40 firewall kernel: wifi0: test Genesis mode with HCR 0x1f
Apr 29 20:59:40 firewall kernel: wifi0: Original COR value: 0x0
Apr 29 20:59:40 firewall kernel: Readback test failed, HCR 0x1f write 00 e1 
a1 f

Apr 29 20:59:40 firewall kernel: wifi0: test Genesis mode with HCR 0x0f
Apr 29 20:59:40 firewall kernel: wifi0: Original COR value: 0xa1
Apr 29 20:59:40 firewall kernel: Readback test succeeded, HCR 0x0f
Apr 29 20:59:40 firewall kernel: wifi0: registered netdevice wlan0
Apr 29 20:59:40 firewall kernel: wlan0: cannot set RID fc02 (len=34) - no 
PRI f/w
Apr 29 20:59:40 firewall kernel: wlan0: could not set interface UP - no PRI 
f/w


/etc/network/interfaces
auto wlan0
iface wlan0 inet static
   address 10.0.0.1
   netmask 255.255.255.0
   broadcast 10.0.0.255
   fw_primary /etc/firmware/hostap/pm010102.hex
   fw_secondary /etc/firmware/hostap/rf010800.hex
   wireless_mode ad_hoc
   wireless_essid jim
   wireless_channel 5

ip addr
3: eth0: BROADCAST,MULTICAST,UP mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 00:20:18:2c:1f:59 brd ff:ff:ff:ff:ff:ff
   inet 192.168.1.10/24 brd 192.168.1.255 scope global eth0
4: wifi0: BROADCAST,MULTICAST mtu 1500 qdisc noop qlen 1000
   link/ieee802.11 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
5: wlan0: BROADCAST,MULTICAST mtu 1500 qdisc noop
   link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
   inet 10.0.0.1/24 brd 10.0.0.255 scope global wlan0

iwconfig
lono wireless extensions.
dummy0no wireless extensions.
eth0  no wireless extensions.
wifi0 IEEE 802.11-DS  ESSID:jim
 Mode:Master
 Encryption key:off
wlan0 IEEE 802.11-DS  ESSID:jim
 Mode:Master
 Encryption key:off
 Link Quality:0  Signal level:0  Noise level:0
 Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
 Tx excessive retries:0  Invalid misc:0   Missed beacon:0

_
MSN® Calendar keeps you organized and takes the effort out of scheduling 
get-togethers. 
http://join.msn.com/?pgmarket=en-capage=byoa/premxAPID=1994DI=1034SU=http://hotmail.com/encaHL=Market_MSNIS_Taglines 
 Start enjoying all the benefits of MSN® Premium right now and get the 
first two months FREE*.




---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642

leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/