Cant get a DWL520 rev E device to work in LRP. I have the following
modules loaded, hostap.o and hostap_pci.o and packages hostapu.lrp and
wireless.lrp. The device appears in ip addr and the interface pings from
the LRP box but cant get the radio to pass data.
bering 2.4
debug
Apr 29
Cant get a DWL520 rev E device to work in LRP. I have the following
modules loaded, hostap.o and hostap_pci.o and packages hostapu.lrp and
wireless.lrp. The device appears in ip addr and the interface pings from
the LRP box but cant get the radio to pass data.
bering 2.4
debug
Apr 29
Things seem to point to the cards as running only primary firmware. Whats
the next step?
firewall# hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'
NICID: id=0x8024 v1.0.0 (PRISM III Mini-PCI (AT24C08 compatible small serial
flash))
PRIID: id=0x0015 v1.1.2
$
$PRISM2_SREC -rp $1 $2
fi
return 0
}
From: Jim Munro [EMAIL PROTECTED]
To: leaf-user@lists.sourceforge.net
CC: [EMAIL PROTECTED]
Subject: Re: [leaf-user] Re DWL 520 rev E some progress
Date: Mon, 01 May 2006 22:29:58 +
Hi Eric,
Thanks for the help. I have been able to get
Trying to get wpa to work with the madwifi drivers. I have been able to get
the madwifi drivers to work with my NIC and have verifiyed WEP and the
master (ap) mode. When I load and configure the hostapd daemon I notice
there is no ath0ap device. Does the daemon not work with some madwifi
Thanks! I added wlan_tkip and ath_pci autocreate=none to /etc/modules and
success :)
Sometimes another pair of eyes helps...
Jim
There are 2 documents on the madwifi site that describes the hostapd setup:
http://madwifi.org/wiki/UserDocs/WPA_PSK_on_Both_Ends (the Now do the AP
side part)
Is there any Bering uClibc package similar to function to P9100.lrp for USB
type printers?
_
Play Q6 for your chance to WIN great prizes.
http://q6trivia.imagine-live.com/enca/landing
I can’t get the p9100 package to print. It worked fine in 3.1. Here are some
log messages.
From lpr.log
Apr 23 03:07:57 vfirewall2 p9100d[2976]: Connection from :::192.168.1.2
port 6206 acceptedApr 23 03:07:57 vfirewleaf-user@lists.sourceforge.netall2
p9100d[2976]: /dev/lp0: No
Hi all,
It seems that loading hdsupp in leaf.cfg breaks selection f)Find and
load modules for hardware in the configuration menu. Noticed when I did
an upgrade from a pre 4.3 release to 5.0.1. Causes tar: write error: No
space left on device. In the end, I discovered I no longer need to
Thanks Andrew!. Increasing syst_size to 60M solved it. Looking back I guess I
really had 2 issues, this one and the fact that I had left an internal compact
flash in the PC without completely disabling it in the BIOS. The PC was booted
from a thumb drive and the hdsupp package(s) was loaded
Hi,
I am having some problems logging into the the serial console of a
raspberry pi. I have connected a usb to serial dongle to the raspberry
pi gpio pins. I have a hyperterm
session running at 115200 8 n 1 on my laptop. I have edited cmdline.txt
to read:
dwc_otg.lpm_enable=0
Hi
The only raspberry pi set of files I can get to work is
Bering-uClibc-5.1-alpha1. Looks good so far but I am still waiting for
a usb to ethernet adapter to arrive in order to test further. The other
releases since then seem appear to have problems. When I go to edit the
config files, I
Thanks alot KP. It was just as you suggested.
cheers Jim
--
Am Samstag, 7. März 2015, 01:53:29 schrieb Jim Munro:
Hi
The only raspberry pi set of files I can get to work is
Bering-uClibc-5.1-alpha1. Looks good so far but I am
Hi everyone
Had some trouble with knockd and the current version of shorewall. My
problem was with 5.2 and Raspberry pi but likely applies to other
versions also
So here are the changes I made for /etc/knockd configuration.
[options]
logfile = /var/log/knockd.log
# example for opening
Hi,
I'm using the p9100.lrp module on leaf bering 5.2.6. Nothing will print
to the parallel port on the leaf box. Getting this error in syslog when
I print from the network:
Feb 16 03:19:57 firewall p9100d[10300]: /dev/lp0: No such file or directory,
will try opening late
lp0 does not
Thanks Andrew,
I loaded an old release and discovered I failed to include lp in modules.lrp.
My mistake and I should have read the documentation more closely. Its working
fine now.
Thanks
Jim
--
Check out the vibrant
16 matches
Mail list logo