Hello Jie,
Thank you for your patch, unfortunately it fails to apply, please rebase
and resend it.
Also, please see my comments inline, below.
On 31.03.2017 13:06, Jie Ke wrote:
From: Soundtrack9407 <soundtrack9...@gmail.com>
Full and real name, please.
Specifications:
- SoC: Qualcomm QCA9561 (750MHz)
- RAM: 64MB
- Storage: 8MB (Winbond w25q64)
- Wireless: Qualcomm QCA9561 + QCA9887
- Ethernet: 4+1 x 100M
http://www.tp-link.com.cn/product_415.html
The most important question here is:
How the user can install LEDE on this device?
In fact, I have this device here and I know that the vendor firmware
(both the bootloader and the system) contains RSA signature verification
and when I try factory image, built based on your patch, in vendor GUI
I'm getting: "RSA signature verification failed" (translation).
Also, the U-Boot HTTP recovery mode doesn't accept the image:
CC 96 72 CA DA F7 FE 1C 67 4B A4 67 1A BC 35 57
error: RSA check failed.
check firmware failed, exit
So, why should we include support for this device if there is no
common/normal way to use it at all (at least for now)?
Signed-off-by: Soundtrack9407 <soundtrack9...@gmail.com>
Full and real name, please.
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 7 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 2 +
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../files/arch/mips/ath79/mach-tl-wdr5600-v1.c | 143 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/tp-link.mk | 13 ++
12 files changed, 187 insertions(+)
create mode 100644
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr5600-v1.c
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 32d4931..82b08f4 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -644,6 +644,13 @@ tl-wdr4900-v2)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt"
;;
+tl-wdr5600-v1)
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0"
"0x02"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0"
"0x04"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0"
"0x08"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0"
"0x10"
+ ;;
This one looks almost the same as for tl-wdr6500-v2 and as these boards
seem to be very similar from h/w point of view... there is a bug
somewhere here.
I suppose WAN LED for tl-wdr6500-v2 is assigned to a wrong interface
(eth1 instead of eth0)... just a side note.
tl-wdr6500-v2|\
tl-wr741nd)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
b/target/linux/ar71xx/base-files/etc/board.d/02_network
index a55e50a..6ea3e73 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -292,6 +292,7 @@ ar71xx_setup_interfaces()
r6100|\
smart-300|\
tl-mr3420-v2|\
+ tl-wdr5600-v1|\
tl-wdr6500-v2|\
tl-wr841n-v8|\
tl-wr940n-v4|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index 461d0da..3d23502 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -409,6 +409,7 @@ get_status_led() {
tl-wr2543n)
status_led="tp-link:green:wps"
;;
+ tl-wdr5600-v1|\
tl-wdr6500-v2)
status_led="tp-link:white:system"
;;
diff --git
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 4938e26..bdb1c35 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -94,6 +94,7 @@ case "$FIRMWARE" in
;;
archer-c59-v1|\
archer-c60-v1|\
+ tl-wdr5600-v1|\
tl-wdr6500-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat
/sys/class/net/eth1/address) -2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8c87737..a0bdd02 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -309,6 +309,9 @@ tplink_board_detect() {
"49000002")
model="TP-Link TL-WDR4900"
;;
+ "56000001")
+ model="TP-Link TL-WDR5600"
+ ;;
This is redundant here. Without this, model name will be taken from
machine name ("TP-LINK TL-WDR5600 v1" in your case).
This additional model detection for TP-Link devices is needed in case of
different models using same board (machine). As an example you can take
TL-WR842ND v1 which uses TL-MR3420 v1 board code.
"65000002")
model="TP-Link TL-WDR6500"
;;
@@ -1046,6 +1049,9 @@ ar71xx_board_detect() {
*"TL-WDR4900 v2")
name="tl-wdr4900-v2"
;;
+ *"TL-WDR5600 v1")
+ name="tl-wdr5600-v1"
+ ;;
*"TL-WDR6500 v2")
name="tl-wdr6500-v2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index f89ad2c..2e8379a 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -413,6 +413,7 @@ platform_check_image() {
tl-wdr3500|\
tl-wdr4300|\
tl-wdr4900-v2|\
+ tl-wdr5600-v1|\
tl-wdr6500-v2|\
tl-wpa8630|\
tl-wr1041n-v2|\
@@ -442,6 +443,7 @@ platform_check_image() {
local magic_ver="0100"
case "$board" in
+ tl-wdr5600-v1|\
tl-wdr6500-v2)
magic_ver="0200"
;;
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 68b408a..d543f53 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -182,6 +182,7 @@ CONFIG_ATH79_MACH_TL_WAX50RE=y
CONFIG_ATH79_MACH_TL_WDR3320_V2=y
CONFIG_ATH79_MACH_TL_WDR3500=y
CONFIG_ATH79_MACH_TL_WDR4300=y
+CONFIG_ATH79_MACH_TL_WDR5600_V1=y
Please, disable this in {nand,mikrotik}/config-default.
CONFIG_ATH79_MACH_TL_WDR6500_V2=y
CONFIG_ATH79_MACH_TL_WPA8630=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 72f3591..7401328 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1487,6 +1487,16 @@ config ATH79_MACH_TL_WDR4300
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WDR5600_V1
+ bool "TP-LINK TL-WDR5600 v1 board support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_WDR6500_V2
bool "TP-LINK TL-WDR6500 v2 board support"
select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 7383244..24a1cd9 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -187,6 +187,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) +=
mach-tl-wax50re.o
obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR5600_V1) += mach-tl-wdr5600-v1.o
obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WPA8630) += mach-tl-wpa8630.o
obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr5600-v1.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr5600-v1.c
new file mode 100644
index 0000000..217827a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr5600-v1.c
~90% content of this file is an exact copy of the mach-tl-wdr6500-v2.c.
Please, drop it and include your changes there (in
mach-tl-wdr6500-v2.c), making use of already existing code.
@@ -0,0 +1,143 @@
+/*
+ * TP-LINK TL-WDR5600 v1 support
+ *
+ * Copyright (C) 2017 Jie Ke <soundtrack9...@gmail.com>
+ *
+ * Based on TP-LINK TL-WDR6500 v2 board support
+ *
+ * Copyright (C) 2015 Weijie Gao <hackpas...@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define TL_WDR5600_V1_GPIO_LED_SYS 21
+#define TL_WDR5600_V1_GPIO_LED_WAN 19
+#define TL_WDR5600_V1_GPIO_LED_LAN1 17
+#define TL_WDR5600_V1_GPIO_LED_LAN2 16
+#define TL_WDR5600_V1_GPIO_LED_LAN3 15
+#define TL_WDR5600_V1_GPIO_LED_LAN4 14
+
+#define TL_WDR5600_V1_GPIO_BTN_RESET 1
+
+#define TL_WDR5600_V1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WDR5600_V1_KEYS_DEBOUNCE_INTERVAL (3 *
TL_WDR5600_V1_KEYS_POLL_INTERVAL)
+
+#define TL_WDR5600_V1_WMAC_CALDATA_OFFSET 0x1000
+#define TL_WDR5600_V1_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *tl_wdr5600_v1_part_probes[] = {
+ "tp-link-64k",
+ NULL,
+};
+
+static struct flash_platform_data tl_wdr5600_v1_flash_data = {
+ .part_probes = tl_wdr5600_v1_part_probes,
+};
+
+static struct gpio_led tl_wdr5600_v1_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WDR5600_V1_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WDR5600_V1_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WDR5600_V1_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WDR5600_V1_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WDR5600_V1_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:white:system",
+ .gpio = TL_WDR5600_V1_GPIO_LED_SYS,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tl_wdr5600_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WDR5600_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WDR5600_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+
+static void __init tl_ap151_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&tl_wdr5600_v1_flash_data);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* WAN */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ /* LAN */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ ath79_init_mac(tmpmac, mac, -1);
+ ath79_register_wmac(ee + TL_WDR5600_V1_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_register_pci();
+}
+
+static void __init tl_wdr5600_v1_setup(void)
+{
+ tl_ap151_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wdr5600_v1_leds_gpio),
+ tl_wdr5600_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WDR5600_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wdr5600_v1_gpio_keys),
+ tl_wdr5600_v1_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR5600_V1, "TL-WDR5600-v1", "TP-LINK TL-WDR5600
v1",
+ tl_wdr5600_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index f3277cd..e91328a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -225,6 +225,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */
+ ATH79_MACH_TL_WDR5600_V1, /* TP-LINK TL-WDR5600 v1 */
ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */
ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
diff --git a/target/linux/ar71xx/image/tp-link.mk
b/target/linux/ar71xx/image/tp-link.mk
index b251135..afc5629 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -259,6 +259,19 @@ $(Device/tl-wdr4300-v1)
endef
TARGET_DEVICES += tl-wdr3500-v1 tl-wdr3600-v1 tl-wdr4300-v1 tl-wdr4300-v1-il
tl-wdr4310-v1 mw4530r-v1
+define Device/tl-wdr5600-v1
+$(Device/tplink-8mlzma)
+ DEVICE_TITLE := TP-LINK TL-WDR5600v1
Use "TP-LINK TL-WDR5600 v1" here, I have already stagged this fix:
https://git.lede-project.org/?p=lede/pepe2k/staging.git;a=commit;h=c95cdef38fa4d96f7e65b0a419d7e4ec10ca4818
--
Cheers,
Piotr
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
+ KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma |
mktplinkfw-combined
+ BOARDNAME = TL-WDR5600-v1
+ DEVICE_PROFILE = TLWDR5600V1
+ TPLINK_HWID := 0x56000001
+ TPLINK_HEADER_VERSION := 2
+endef
+TARGET_DEVICES += tl-wdr5600-v1
+
define Device/tl-wdr6500-v2
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK TL-WDR6500v2
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
