Re: [LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-05-13 Thread Sergey Ryazanov
Hello, On Fri, May 12, 2017 at 2:35 PM, Felix Fietkau wrote: > On 2017-05-12 12:47, Edwin van Drunen wrote: >> Hello Sergey, >> >> When using sysupgrade on an RB912 running a full LEDE 17.01.1 to install a >> custom image made with the image builder, the kernel is installed just

Re: [LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-05-12 Thread Felix Fietkau
On 2017-05-12 12:47, Edwin van Drunen wrote: > Hello Sergey, > > When using sysupgrade on an RB912 running a full LEDE 17.01.1 to install a > custom image made with the image builder, the kernel is installed just fine. > Before and after the sysupgrade I booted OpenWRT so I could mount the YAFFS

Re: [LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-05-12 Thread Edwin van Drunen
Hello Sergey, When using sysupgrade on an RB912 running a full LEDE 17.01.1 to install a custom image made with the image builder, the kernel is installed just fine. Before and after the sysupgrade I booted OpenWRT so I could mount the YAFFS kernel partition and could verify that the kernel was

Re: [LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-04-12 Thread Edwin van Drunen
Hello Sergey, I forget to include the mailing list and did so now, so others can also maybe benefit from our findings. The board is booted with 17.01.0 initramfs image and “sysupgraded” with the 17.01.0 nand-large image (corresponding with the 2048 byte page size of the NAND flash). Then I

Re: [LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-04-10 Thread Sergey Ryazanov
Hello Edwin, On Sun, Apr 9, 2017 at 10:11 PM, Edwin van Drunen wrote: > My RB912 boards came with 2048-byte pages and I installed the nand-large > image, specifically: >

Re: [LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-04-09 Thread Edwin van Drunen
Hello Sergey, My RB912 boards came with 2048-byte pages and I installed the nand-large image, specifically: https://downloads.lede-project.org/releases/17.01.0/targets/ar71xx/mikrotik/lede-17.01.0-r3205-59508e3-ar71xx-mikrotik-nand-large-squashfs-sysupgrade.bin I have installed it on 23 boards

Re: [LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-04-09 Thread Sergey Ryazanov
Hello Edwin, On Mon, Mar 20, 2017 at 4:04 PM, Edwin van Drunen wrote: > * Longer story: > The installation procedure for LEDE 17.01 on Mikrotik RB-912 boards should be > as follows: > - TFTP boot the board using the "vmlinux-initramfs.elf” image > - scp the

[LEDE-DEV] Sysupgrade on Mikrotik RB912

2017-03-20 Thread Edwin van Drunen
Hello, * In short: When installing LEDE 17.01 on the Mikrotik RB912 with sysupgrade the kernel can not be found and the system will not boot, because routerboot expects to find the kernel on a YAFFS partition. I was able to fix it by manually copying the kernel to MTD5 formatted as YAFFS. Is