Also collapses the three identical configurations into one block.
Signed-off-by: Claudio Leite
---
target/linux/mvebu/base-files/etc/board.d/02_network | 10 --
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git
I'm trying to install LEDE on an apu2 system.
My first attempt is not working: I see grub menu, then it hangs as soon as
it tries to boot. If someone has a working .config
and/or other hints on how to go about this, I'd appreciate some pointers.
Thanks,
Ben
--
Ben Greear
Must...remember...don't feed the trolls (or their close cousins the
vocal unrealistic idealogues).
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
On 21.05.2016 14:39, Hauke Mehrtens wrote:
> Hi,
>
>
> On 05/21/2016 07:35 AM, Dirk Neukirchen wrote:
>> @@ -38,12 +38,10 @@ endef
>> TARGET_CFLAGS += $(FPIC)
>>
>> CONFIGURE_ARGS += \
>> ---without-zlib \
>
> Was the zlib dependency completely removed from wolfssl? Have you tried
> to
On 2016-05-21 14:05, Dheeran Senthilvel wrote:
> Hi Guys,
>
> Nice work there getting everything to Linux 4.4.11. Tested the new
> build (r321 dated 20/05/2016) Everything is seems to work pretty
> decently, except that upon reboot (both manually or through command
> line) the device is
Hi,
On 05/21/2016 10:07 AM, MichaĆ Osowiecki wrote:
> Cisco RV042G is Cavium based router with BCM53125 switch and BCM54612E
> connected to port 8, and port 5 acts as cpu port. Probably Linksys
> LRT214 and LRT224 will be affected by this patch too (boards are
> identical).
> I don't know if
Hi Guys,
Nice work there getting everything to Linux 4.4.11. Tested the new build (r321
dated 20/05/2016) Everything is seems to work pretty decently, except that upon
reboot (both manually or through command line) the device is struck. When
serially accessed an error is seen
__
Hi Sven,
this patch fails to apply.
mind re-spinning the series on top of latest source.git ?
John
On 20/05/2016 17:53, Sven Eckelmann wrote:
> Signed-off-by: Sven Eckelmann
> ---
> target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh | 1 +
>