Re: [LEDE-DEV] [PATCH v2] ipq806x: add kernel 4.14 support

2018-05-17 Thread John Crispin
On 17/05/18 13:47, Ram Chandra Jangir wrote: Thanks Michael for confirming this, Can you please help to update the kernel partition size to 4MB for R7800 and send it as patch to community (lede-dev@lists.infradead.org)? This will help to enable kernel v4.14 for all ipq806x based boards.

[LEDE-DEV] Moving the mailing lists

2018-05-17 Thread John Crispin
Hi All, In order to bring the OpenWrt mailing list back to operational status, we are moving them to the infradead server. The 2 current LEDE lists will be renamed * lede-dev->openwrt-dev * lede-adm -> openwrt-adm the old names will get redirected to the new ones, so mails sent to either

Re: [LEDE-DEV] [PATCH 1/4] staging: mt7621-gpio: remove redundant owner assignments of drivers

2018-05-17 Thread John Crispin
.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch +++ b/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch @@ -48,7 +48,7 @@ Signed-off-by: John Crispin <blo...@openwrt.org> +obj-$(CONFIG_GPIO_MT7621)+= gpio-mt7621.o --- /dev/null +++ b/drivers/gpio

Re: [LEDE-DEV] [PATCH] fstools: add middle layer (original root overlay) to overlayfs when pivot the /overlay to the USB disk.

2018-05-14 Thread John Crispin
On 11/05/18 11:18, Andrzej Lossowsk wrote: Currently after pivot to the USB disk (extroot), configuration and data from original root overlay are gone. Still accessible, but all previous configuration steps must be repeated (or data from original root overlay must be copied to new USB disk

[LEDE-DEV] patchwork pre 2018

2018-05-14 Thread John Crispin
Hi, I'd like to close everything in patchwork from 2017 and ask people to resubmit in case they still think its applicable. a few patches are still delegated. please remove your delegation if you do not plan to handle the patches in the coming days. I'll close everything on the weekend that

Re: [LEDE-DEV] [PATCH] Add support for Flexible I/O Tester

2018-05-14 Thread John Crispin
On 13/05/18 20:58, Dragan Stancevic wrote: A lot of SoC boards come with integrated SATA it would be nice to be able to use fio to test performance of those boards. ___ Lede-dev mailing list Lede-dev@lists.infradead.org

Re: [LEDE-DEV] new ath79 target

2018-05-07 Thread John Crispin
On 08/05/18 05:31, Paul Blazejowski wrote: John, I wanted to ask if the Netgear WNDR3700v4 router will also be ported to the new ath97 target down the road? And possibly get 4.14 or newer kernel? Thanks! Hi Paul, the aim is to move all board over mid term.     John

Re: [LEDE-DEV] Lack of DNS robustness for openwrt.org

2018-05-07 Thread John Crispin
On 07/05/18 20:34, Arjen de Korte wrote: Citeren Jo-Philipp Wich : Hi Bjørn, the current timings of the DO zone are: ;; ANSWER SECTION: openwrt.org.    1800 IN    SOA ns1.digitalocean.com. hostmaster.openwrt.org. (     1525688668 ; serial    

Re: [LEDE-DEV] new ath79 target

2018-05-07 Thread John Crispin
On 07/05/18 08:13, John Crispin wrote: Hi, I have just pushed the new ath79 target to trunk. This will replace ar71xx mid term, switching the target over to pure OF. a few boards are already supported, would be great if people could start moving boards over that they use. I am available

Re: [LEDE-DEV] [PATCH] ath79: relicense DTS files to the GPL 2.0+ / MIT

2018-05-07 Thread John Crispin
On 07/05/18 11:31, Rafał Miłecki wrote: On 7 May 2018 at 10:46, Felix Fietkau wrote: On 2018-05-07 09:47, Rafał Miłecki wrote: From: Rafał Miłecki Some maintainers prefer DTS files licensed under permissive license like MIT / BSD. As all DT bindings should

Re: [LEDE-DEV] [PATCH] igmpproxy: bump to 0.2.1

2018-05-07 Thread John Crispin
Hi Kevin, apparently you have a 10->11 patch in your tree that needs to be applied prior to the 11->12 update     John ___ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev

Re: [LEDE-DEV] [PATCH V2] ath79: relicense DTS files to the GPL 2.0+ / MIT

2018-05-07 Thread John Crispin
share them across projects. The safest solution is to use dual licensing: that way it stays clear these files can be used in GPL projects without depending on current belief of licenses compatibility. Signed-off-by: Rafał Miłecki <ra...@milecki.pl> Acked-by: John Crispin <j...@phrozen.or

Re: [LEDE-DEV] Lack of DNS robustness for openwrt.org

2018-05-07 Thread John Crispin
On 07/05/18 09:11, Jo-Philipp Wich wrote: Hi Joerg, John. I created an openwrt.org zone on Digital Ocean now so you could delegate the name servers to ns1.digitalocean.com, ns2.digitalocean.com and ns3.digitalocean.com, maybe with one of the SPI machines thrown into the mix... ~ Jo Hi

[LEDE-DEV] new ath79 target

2018-05-07 Thread John Crispin
Hi, I have just pushed the new ath79 target to trunk. This will replace ar71xx mid term, switching the target over to pure OF. a few boards are already supported, would be great if people could start moving boards over that they use. I am available to help via ML, mail, irc, ... AHB wifi is

Re: [LEDE-DEV] Lack of DNS robustness for openwrt.org

2018-05-06 Thread John Crispin
On 06/05/18 22:44, Joerg Jaspert wrote: On 15029 March 1977, Bjørn Mork wrote: 1) update the .org delegation to include *all* NS records for the openwrt.org zone I added the soapstone one to the registrar for now, as thats an easy step to do. 3) possibly consider adding/replacing DNS

Re: [LEDE-DEV] Lack of DNS robustness for openwrt.org

2018-05-06 Thread John Crispin
On 06/05/18 17:44, David Woodhouse wrote: Hello, I apologize for bringing up this long-standing issue at a time where you all have need to other issues to take care of. But it's again become a real pressing issue, at least seen from the networks I have a presence in. We can host it (primary

Re: [LEDE-DEV] 18.06 Status?

2018-05-06 Thread John Crispin
with this porposal while it was already taken care of. Yours sincerely, Jaap Buurman On Sat, May 5, 2018, 19:57 John Crispin <j...@phrozen.org <mailto:j...@phrozen.org>> wrote: On 05/05/18 12:27, Jaap Buurman wrote: > Hi all, > > I feel like everybody is just

Re: [LEDE-DEV] 18.06 Status?

2018-05-05 Thread John Crispin
On 05/05/18 12:27, Jaap Buurman wrote: Hi all, I feel like everybody is just waiting for everybody to agree what features we want in before coming up with the next step of picking a date. Obviously this isn't working out very well. Why not turn things around? Pick a date in a few weeks time

Re: [LEDE-DEV] [PATCH V1][RFC][procd] udevtrigger: trigger devices w/o dev sysfs entry

2018-05-04 Thread John Crispin
On 22/03/18 16:22, Sergiy Kibrik wrote: A lot of devices aren't represented via major/minor numbers and thus don't have dev entry in their sysfs directory, like network devices, USB, power supplies etc. It looks to be the rigth thing to trigger them as well. Anyway, it's up to the hotplug

Re: [LEDE-DEV] [PATCH] kernel: bump kernel 4.4 to 4.4.131 for 17.01

2018-05-04 Thread John Crispin
Hi, i am afraid you need to refresh once more, fails to apply since the ipv6 fix to patch 670     John On 03/05/18 21:00, Etienne Haarsma wrote: * Refreshed patches Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma ---

Re: [LEDE-DEV] [PATCH v1 0/3] at91 patch series.

2018-05-02 Thread John Crispin
I'll give it a try tomorrow. If i fail i'll let you know and you can send a v3 :-D     John -Original Message----- From: John Crispin [mailto:j...@phrozen.org] Sent: Tuesday, May 1, 2018 10:28 PM To: Sandeep Sheriker Mallikarjun - C17018 <sandeepsheriker.mallikar...@microchip.

Re: [LEDE-DEV] [PATCH v1 0/3] at91 patch series.

2018-05-01 Thread John Crispin
On 02/05/18 00:43, Sandeep Sheriker Mallikarjun wrote: sending below 3 patches with rebase. Sandeep Sheriker Mallikarjun (3): at91: reorganize at91 subtargets at91: Add SAMA5D2 PTC EK board at91: refreshing kernel configurations. Hi, I am having problems applying this series ontop

Re: [LEDE-DEV] [PATCH v2] build: log time taken by each packages/steps

2018-05-01 Thread John Crispin
On 30/04/18 21:55, Etienne Champetier wrote: The idea is to easily get the list of packages taking the most time to build, and see if we can improve them v1: Use SetupHostCommand as recommended by John v2: add space after 'time:', remove useless /usr/bin/time from SetupHostCommand

Re: [LEDE-DEV] [PATCH] sysctl: Protect hard/symlinks by default.

2018-05-01 Thread John Crispin
On 30/04/18 22:15, Rosen Penev wrote: There is no usecase for not protecting symlinks that I know of in OpenWrt. Not even on desktop systems where you have multiple users with a shell. Hi, patch descriptions should be wrapped at 75 chars     John Signed-off-by: Rosen Penev

Re: [LEDE-DEV] [PATCH] uboot-envtools: Change download to git.

2018-05-01 Thread John Crispin
On 30/04/18 22:10, Rosen Penev wrote: Currently, the build system uses an openwrt mirror which does not currently workand FTP can be unreliable under several circumstances (Ubuntu 16.04 WSL being an example). This change implicitly allows using all the mirrors to download. Changing this to

Re: [LEDE-DEV] [PATCH] sysctl: Protect hard/symlinks by default.

2018-04-30 Thread John Crispin
On 30/04/18 22:15, Rosen Penev wrote: There is no usecase for not protecting symlinks that I know of in OpenWrt. Not even on desktop systems where you have multiple users with a shell. Signed-off-by: Rosen Penev v2: Move to 10-default.conf file. Hi, no need to resend but

Re: [LEDE-DEV] [PATCH] wireguard: add distinction for remote and local endpoint ip

2018-04-30 Thread John Crispin
On 19/02/18 19:54, Thomas Huehn wrote: This patch fixes a bug when someone tries to set up a Wireguard tunnel to an endpoint where its ip belongs to a local subnet, e.g. in a Freifunk olsr mesh. The call of proto_add_host_dependency() is just needed in cases where the endpoint is reachable via

Re: [LEDE-DEV] [PATCH] uboot-envtools: Change download to git.

2018-04-30 Thread John Crispin
On 16/03/18 01:26, Rosen Penev wrote: Currently, the build system uses an openwrt mirror which does not currently workand FTP can be unreliable under several circumstances (Ubuntu 16.04 WSL being an example). This change implicitly allows using all the mirrors to download. Changing this to

Re: [LEDE-DEV] [OpenWrt-Devel] [PATCH 0/4] Gemini forward-port to kernel v4.14

2018-04-30 Thread John Crispin
On 29/04/18 20:32, Roman Yeryomin wrote: On 2018-04-27 09:18, John Crispin wrote: On 17/04/18 00:34, Roman Yeryomin wrote: On 2018-04-15 20:22, Roman Yeryomin wrote: On 2018-04-14 20:36, Hans Ulli Kroll wrote: Hi Roman On Tue, 10 Apr 2018, Linus Walleij wrote: On Mon, Apr 9, 2018 at 12

Re: [LEDE-DEV] [PATCH 3/3] sysctl: Protect hard/symlinks by default.

2018-04-30 Thread John Crispin
On 31/03/18 00:18, Rosen Penev wrote: There is no usecase for not protecting symlinks that I know of in OpenWrt. Not even on desktop systems where you have multiple users with a shell. Signed-off-by: Rosen Penev Hi, does not apply due to

Re: [LEDE-DEV] [PATCH] mvebu: Switch Turris Omnia to use ath10k-ct driver and firmware.

2018-04-30 Thread John Crispin
On 31/03/18 00:19, Rosen Penev wrote: My testing has shown both ath10k and firmware to be unstable. Here is a summary of results done over two weeks: ath10k + QCA firmware = driver crash, WiFi dies completely. ath10k + CT firmware = driver crash. WiFi dies completely. ath10k-ct + QCA

Re: [LEDE-DEV] [PATCH] build: log time taken by each packages/steps

2018-04-30 Thread John Crispin
On 31/03/18 06:22, Etienne Champetier wrote: The idea is to easily get the list of packages taking the most time to build, and see if we can improve them Use SetupHostCommand as recommended by John Signed-off-by: Etienne Champetier --- include/prereq-build.mk

Re: [LEDE-DEV] [PATCH] download: skip hash check without a download hash

2018-04-30 Thread John Crispin
On 30/03/18 17:34, Hauke Mehrtens wrote: If the package doe not contain a PKG_HASH just skip the check instead of making the download fail. The scripts/download.pl script will automatically skip the hash check in case the hash value equals skip, otherwise it fails. Signed-off-by: Hauke

Re: [LEDE-DEV] [PATCH 10/12] at91: reorganize at91 subtargets

2018-04-30 Thread John Crispin
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote: reorganizing at91 subtargets based on sama5 soc features and this fix below problems. 1. able to set neon flags to sama5d2 & sama5d4 subtargets. 2. fix the make clean which removes all the subtargets in bin folder. 3. able to

Re: [LEDE-DEV] [PATCH] samba36: add hotplug script

2018-04-30 Thread John Crispin
On 12/04/18 11:41, Rosy Song wrote: Add hotplug handle script for storage devices, this will add corresponding option in the /etc/config/samba file automatically. If user do not want this feature, it can be cancel via samba relevant menu option. Hi, patch as such looks ok.

Re: [LEDE-DEV] [PATCH] iptables: link extension libraries with -lm

2018-04-29 Thread John Crispin
ri, Apr 27, 2018 at 8:41 AM, John Crispin <j...@phrozen.org> wrote: On 24/04/18 10:05, Alin Nastac wrote: This fixes an iptables link error when kernel config include CONFIG_NETFILTER_XT_MATCH_STATISTIC=y related to the missing -lm argument on the linker command line. Error is caused by

Re: [LEDE-DEV] [PATCH] libusb: Update to 1.0.22

2018-04-28 Thread John Crispin
On 28/04/18 07:13, Rosen Penev wrote: Switched download from SourceForge to GitHub. It seems the author migrated to that. Also fixed the website URL as the SourceForge link is dead. Compile tested on ar71xx and mvebu. Small size decrease on ar71xx: 30444 vs. 30099 bytes. Signed-off-by:

Re: [LEDE-DEV] [PATCH] fstools: use ramoverlay if no rootfs_data and rootfs is ro

2018-04-27 Thread John Crispin
On 27/04/18 14:05, Arvid E. Picciani wrote: - libfstools/mtd.c no longer fails if volume is ro. - mount_root ramoverlay if no rootfs_data and rootfs is ro Hi, this approach is an ugly hack. please do the following mtd_ope() should always try to open as r/w and if that fails try ro. then

Re: [LEDE-DEV] [PATCH] kernel: Activate CONFIG_BRIDGE_VLAN_FILTERING

2018-04-27 Thread John Crispin
On 02/04/18 16:42, Hauke Mehrtens wrote: This allows to configure VLAN aware bridges in Linux, it is also possible to offload these VLAN aware bridges with DSA to some hardware, which is supported by most of the DSA drivers. This adds support for the VLAN features mentioned in bridge man

Re: [LEDE-DEV] [PATCH] libusb: Update to 1.0.22

2018-04-27 Thread John Crispin
On 02/04/18 03:11, Rosen Penev wrote: Switched download from SourceForge to GitHub. It seems the author migrated to that. Also fixed the website URL as the SourceForge link is dead. Replaced the $(fPIC) macro with PKG_ASLR_PIE. They're both functionally identital. very much not so.

Re: [LEDE-DEV] [PATCH] 17:01 gcc: gcc 6.3.0 fix comparison between pointer and integer

2018-04-27 Thread John Crispin
On 21/04/18 14:54, Etienne Haarsma wrote: Cherry picked from trunk. Signed-off-by: Etienne Haarsma thanks, did a git cherry-pick -x 22e2b402aee17684781ae705a91fb3645299de9c     John --- toolchain/gcc/patches/6.3.0/960-fix-ubsan-defref.patch | 11 +++ 1

Re: [LEDE-DEV] [PATCH] iptables: link extension libraries with -lm

2018-04-27 Thread John Crispin
On 24/04/18 10:05, Alin Nastac wrote: This fixes an iptables link error when kernel config include CONFIG_NETFILTER_XT_MATCH_STATISTIC=y related to the missing -lm argument on the linker command line. Error is caused by the odd looking linker argument ${$*_LIBADD} which get expanded to an

Re: [LEDE-DEV] [OpenWrt-Devel] [PATCH 0/4] Gemini forward-port to kernel v4.14

2018-04-27 Thread John Crispin
On 17/04/18 00:34, Roman Yeryomin wrote: On 2018-04-15 20:22, Roman Yeryomin wrote: On 2018-04-14 20:36, Hans Ulli Kroll wrote: Hi Roman On Tue, 10 Apr 2018, Linus Walleij wrote: On Mon, Apr 9, 2018 at 12:38 PM, Roman Yeryomin wrote: > I have tested them quickly

Re: [LEDE-DEV] ar71xx: Add userspace support for Mikrotik rb-2011iLS

2018-04-26 Thread John Crispin
On 16/04/18 01:25, Simon Paterson wrote: Kernel support already present. Patch adds userspace for the 'iLS' suffix model of the RB2011 family. Enables correct initial switch settings, sysupgrade, etc. https://mikrotik.com/product/RB2011iLS-IN Signed-off-by: Simon Paterson

Re: [LEDE-DEV] [PATCH v2] dropbear: automatically add firewall rules based on the config

2018-04-26 Thread John Crispin
On 18/04/18 15:49, Pierre Lebleu wrote: An extra option (AllowedClientIPs:list) is available to allow specific clients to use this service. Hi, description fails to mention the FW rules being added. v2: do not create the firewall data if there is no valid interface. this v2 info needs to

Re: [LEDE-DEV] [PATCH] u-boot: Switch to HTTP for downloads

2018-04-26 Thread John Crispin
On 19/04/18 22:36, Rosen Penev wrote: The first mirror is dead and the second is FTP, which can be unreliable at times. Tested on Ubuntu 16.04 WSL. Signed-off-by: Rosen Penev --- package/boot/uboot-envtools/Makefile | 4 +--- package/boot/uboot-xburst/Makefile | 4

Re: [LEDE-DEV] [PATCH 2/2] firmware-utils: mkdapimg2: Fix a few issues discovered by clang

2018-04-26 Thread John Crispin
On 23/04/18 01:22, Rosen Penev wrote: I used clang -Weverything and fixed most of the warnings displayed. this is an explanation of what you did and not what the patch does     John Signed-off-by: Rosen Penev --- tools/firmware-utils/src/mkdapimg2.c | 20

Re: [LEDE-DEV] [PATCH fstools] libfstools: fix foreachdir() to pass dir with a trailing slash

2018-04-16 Thread John Crispin
ing trailing slash trivial. A side effect is not calling callbacks for files which is a free bonus optimization. Fixes: cc63723d886fd ("overlay: use lstat rather than stat and make sure there are no trailing spaces") Signed-off-by: Rafał Miłecki <ra...@milecki.pl> Acked-by: John Cr

Re: [LEDE-DEV] [PATCH fstools] libfstools: move mount points when switching to JFFS2

2018-04-16 Thread John Crispin
ew filesystem. Signed-off-by: Rafał Miłecki <ra...@milecki.pl> Acked-by: John Crispin <j...@phrozen.org> --- libfstools/overlay.c | 46 +- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/libfstools/overlay.c b/li

Re: [LEDE-DEV] [PATCH fstools] libfstools: add "const" to char pointer arguments in mount_move()

2018-04-16 Thread John Crispin
On 16/04/18 14:30, Rafał Miłecki wrote: From: Rafał Miłecki <ra...@milecki.pl> That function never modifies these strings so it can/should use consts. It makes it a bit more flexible as now callers can also pass consts. Signed-off-by: Rafał Miłecki <ra...@milecki.pl> Acked-by:

Re: [LEDE-DEV] [OpenWrt-Devel] Wifi-related kernel-oops on mt7621 after 4.14 update

2018-04-12 Thread John Crispin
On 12/04/18 12:42, Kristian Evensen wrote: Hello, I have recently updated some ramips mt7621-devices (ZBT WG3526) to the latest nightly. Almost everything seems to work fine, but using either wifi interface in client mode seems triggers an oops. I see two different oops-messages: Message 1:

Re: [LEDE-DEV] [PATCH 10/12] at91: reorganize at91 subtargets

2018-04-02 Thread John Crispin
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote: reorganizing at91 subtargets based on sama5 soc features and this fix below problems. 1. able to set neon flags to sama5d2 & sama5d4 subtargets. 2. fix the make clean which removes all the subtargets in bin folder. 3. able to

Re: [LEDE-DEV] [PATCH 03/12] uboot-at91: fetch uboot src from u-boot-at91 github

2018-04-02 Thread John Crispin
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote: fetching uboot src from linux4sam/u-boot-at91 github for all at91 target. Signed-off-by: Sandeep Sheriker Mallikarjun Hi, Whats the difference between these uboots ? I am guessing its

Re: [LEDE-DEV] [LEDE-DEV, 3/3] fstools: fix lost mount point when first boot

2018-04-02 Thread John Crispin
On 29/03/18 10:25, rosys...@rosinson.com wrote: When firmware is new flashed and reboot with a storage device plug in its usb interface. Though the filesystem is not ready (FS_STATE_UNKNOWN), the /dev/sda1 still mount on /mnt/sda1 by block-mount, then the system switching jffs...

Re: [LEDE-DEV] [LEDE-DEV,2/3] fstools: fix potential memory leak

2018-04-02 Thread John Crispin
On 29/03/18 10:25, rosys...@rosinson.com wrote: Fix potential memory leak in fstools Signed-off-by: Rosy Song Hi, the description is wrong, this fixes a potential null pointer deref and i dont really see how probing of a FS would work without a magic so we probably

Re: [LEDE-DEV] [LEDE-DEV, 1/3] fstools: add exfat filesystem support

2018-04-02 Thread John Crispin
On 29/03/18 11:57, Jo-Philipp Wich wrote: Hi, fstools will use the full libblkid if it is installed on the system, this should also enable support for all filesystems supported by the full libblkid. Adding more and more exotic stuff to libblkid-tiny will bloat the default fstools install for

Re: [LEDE-DEV] [PATCH 3/3] lantiq: add support for AVM FRITZ!Box 7412

2018-03-09 Thread John Crispin
On 09/03/18 20:55, John Crispin wrote: On 09/03/18 20:17, Valentin Spreckels wrote: Specification: - SoC: Lantiq VRX 220 - CPU Cores: 2x MIPS 34Kc at 500 MHz - RAM: 128 MiB 250 MHz - Storage: 128 MiB NAND flash - Ethernet: built-in Fast Ethernet switch, only port 2 is used - Wireless

Re: [LEDE-DEV] [PATCH 2/3] scripts: add EVA ramboot script

2018-03-09 Thread John Crispin
ars so ... Acked-by: John Crispin <j...@phrozen.org> --- scripts/flashing/eva_ramboot.py | 37 + 1 file changed, 37 insertions(+) create mode 100755 scripts/flashing/eva_ramboot.py diff --git a/scripts/flashing/eva_ramboot.py b/scripts/flashing/eva_ra

Re: [LEDE-DEV] [PATCH 1/3] fritz-tools: add fritz_tffs_nand_read tool

2018-03-09 Thread John Crispin
artin.blumensti...@googlemail.com> + * and on the TFFS 2.0 kernel driver from AVM: + * Copyright (c) 2004-2007 AVM GmbH <fritzbox_i...@avm.de> + * and the TFFS 3.0 kernel driver from AVM: + * Copyright (C) 2004-2014 AVM GmbH <fritzbox_i...@avm.de> + * and the OpenWrt TFFS kernel driver: +

Re: [LEDE-DEV] [PATCH] ramips: fix mt7620 sdhci OF match variable name

2018-02-24 Thread John Crispin
atches-4.14/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ b/target/linux/ramips/patches-4.14/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -4748,7 +4748,7 @@ Signed-off-by: John Crispin <blo...@openwrt.org> + { .compatible = "ra

Re: [LEDE-DEV] [OpenWrt-Devel] kernel version status

2018-02-19 Thread John Crispin
for a replacement because I'll stay on 4.9 forever? Best regards, Maciej On Mon, Feb 19, 2018 at 7:41 AM, John Crispin <j...@phrozen.org <mailto:j...@phrozen.org>> wrote: On 18/02/18 22:43, Hauke Mehrtens wrote: The next OpenWrt release will use kernel 4.9 and

Re: [LEDE-DEV] kernel version status

2018-02-19 Thread John Crispin
On 19/02/18 12:09, Arjen de Korte wrote: Citeren John Crispin <j...@phrozen.org>: On 18/02/18 22:43, Hauke Mehrtens wrote: The next OpenWrt release will use kernel 4.9 and kernel 4.14 depending on the target. All targets that are *not* on either kernel 4.9 or 4.14 will not be in

Re: [LEDE-DEV] kernel version status

2018-02-18 Thread John Crispin
On 18/02/18 22:43, Hauke Mehrtens wrote: The next OpenWrt release will use kernel 4.9 and kernel 4.14 depending on the target. All targets that are *not* on either kernel 4.9 or 4.14 will not be included in the next release. I did some overview of the kernel version some months ago here:

Re: [LEDE-DEV] [OpenWrt-Devel] [PATCH v3 0/4]: imx6: update to Linux 4.14

2018-02-18 Thread John Crispin
On 18/02/18 16:35, Hauke Mehrtens wrote: On 02/18/2018 12:35 PM, John Crispin wrote: On 17/02/18 13:30, Hauke Mehrtens wrote: On 02/15/2018 05:34 PM, Tim Harvey wrote: Testted on a Gateworks GW54xx. Does not support enabling imx-drm modules yet as those will need some adjustments based

Re: [LEDE-DEV] [OpenWrt-Devel] [PATCH v3 0/4]: imx6: update to Linux 4.14

2018-02-18 Thread John Crispin
On 17/02/18 13:30, Hauke Mehrtens wrote: On 02/15/2018 05:34 PM, Tim Harvey wrote: Testted on a Gateworks GW54xx. Does not support enabling imx-drm modules yet as those will need some adjustments based on kernel configs. v3: - included missing patch for pcie enumeration fix v2: - move

Re: [LEDE-DEV] [OpenWrt-Devel] [PATCH v3 1/4] kernel: backport dwc pci enumeration fix

2018-02-18 Thread John Crispin
On 17/02/18 13:33, Hauke Mehrtens wrote: On 02/15/2018 05:34 PM, Tim Harvey wrote: Backport of: http://patchwork.ozlabs.org/patch/860701/ Signed-off-by: Tim Harvey --- .../generic/pending-4.14/812-pci-dwc-fix-enumeration.patch| 11 +++ 1 file changed,

Re: [LEDE-DEV] [PATCH] busybox: re-enable telnet applet

2018-02-18 Thread John Crispin
On 20/06/17 19:13, Stefan Tomanek wrote: While sshd should be favoured over telnetd, having a telnet client on the router is useful for connecting to other devices in the same LAN. Signed-off-by: Stefan Tomanek sorry for the late reply, it has been discussed

[LEDE-DEV] 18.03/4

2018-02-16 Thread John Crispin
Hi, whats on the critical todo list for the upcoming release ? i still have a few minor things that I'll be adding shortly, apart from that I am currently not aware of any huge problems. the release will be a mix between 4.9 and 4.14 afaik !?     John

Re: [LEDE-DEV] [PATCH v2] ubox/logread: add re-connect capability

2018-02-14 Thread John Crispin
On 24/11/17 14:06, Zefir Kurtisi wrote: When logd is restarted while 'logread -f' is running, the logread process terminates, which cumbers debugging in different use-cases. This patch adds re-connect functionality to logread. In follow mode, when the ustream to logd is disconnected, instead

Re: [LEDE-DEV] [PATCH] ag71xx: Add some unlikely calls + rearange some stuff in hard_start_xmit.

2018-02-13 Thread John Crispin
On 13/02/18 23:53, Rosen Penev wrote: Based on Qualcomm driver. Improves iperf3 throughput by ~20mbps on transmit on Archer C7v4. this is missing the description of what the patch does.     John Signed-off-by: Rosen Penev ---

Re: [LEDE-DEV] Bug when processing long lines

2018-02-13 Thread John Crispin
On 11/01/18 17:28, Jakub Horák wrote: Hello LEDE developers, I found a bug in procd that gets triggered when long lines are printed by services whose stdout/stderr are being logged. The bug itself is explained in the attached patch. However, when I was testing the fix, I found out that the

[LEDE-DEV] [PATCH] procd: fix ustream deadlock when there are 0 bytes or no newlines

2018-02-13 Thread John Crispin
Signed-off-by: John Crispin <j...@phrozen.org> --- service/instance.c | 12 +++- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/service/instance.c b/service/instance.c index 917b003..27e35b1 100644 --- a/service/instance.c +++ b/service/instance.c @@ -469,18 +

Re: [LEDE-DEV] [PATCH] ar71xx: Orders the names of the devices alphabetically.

2018-02-13 Thread John Crispin
On 17/01/18 14:16, Arne Zachlod wrote: Signed-off-by: Arne Zachlod --- target/linux/ar71xx/base-files/etc/board.d/01_leds | 236 ++--- .../ar71xx/base-files/etc/board.d/03_gpio_switches | 12 +- target/linux/ar71xx/base-files/etc/diag.sh | 40

Re: [LEDE-DEV] [PATCH v2] ar71xx: add support for Ubiquiti Litebeam M5

2018-02-13 Thread John Crispin
On 17/01/18 14:23, Arne Zachlod wrote: Specification: - SoC: Atheros AR9342 - Flash: 8 MiB - RAM: 64 MiB - UART: 1x UART on PCB - 115200 8N1 - Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A) Doesn't work: * Flash via TFTP with Uiquiti Uboot Installation via vendor firmware: - upload

Re: [LEDE-DEV] [PATCH] curl: Switch all TLS libraries to use ca-bundle.

2018-02-13 Thread John Crispin
On 25/01/18 04:29, Rosen Penev wrote: On Wed, Jan 24, 2018 at 1:56 PM, Hauke Mehrtens wrote: On 01/24/2018 05:28 AM, Rosen Penev wrote: At least one application (transmission) depends on CURL_CA_BUNDLE being set in order to operate properly (Could not connect to tracker

Re: [LEDE-DEV] [PATCH 0/4] imx6: update to Linux 4.14

2018-02-13 Thread John Crispin
On 01/02/18 23:35, Tim Harvey wrote: Tested on a Gateworks GW54xx Tim Harvey (4): kernel: add missing config symbols imx6: add support for Linux 4.14 imx6: switch to kernel 4.14 imx6: remove support for 4.9 Hi, karl and hauke posted some comments to the series. I've marked the

[LEDE-DEV] pistachio target

2018-02-12 Thread John Crispin
Hi, the imgtecs pistachio target is apparently EOL'ed and there is no support for it anymore. imgtec promised to maintain the target inside our tree but with their current situation don't appear to be able to do so in future. I'd like to drop the target ASAP.     John

Re: [LEDE-DEV] [PATCH 1/2] service: add func for string config change check

2018-02-11 Thread John Crispin
Hi could you resend this with a description text ? I figured out what the patch does but it would be nice to have it as part of the commit history. same for the group id patch please ...     John On 11/02/18 13:07, Yousong Zhou wrote: Signed-off-by: Yousong Zhou

Re: [LEDE-DEV] Predict sysupgrade file name

2018-01-31 Thread John Crispin
On 31/01/18 16:00, Yury Shvedov wrote: Hi all, I have a task to universal automatically predict sysupgrade (or factory) file name on the board, with already installed openwrt. The filename format is clear inside buildroot, but I can't find the way to learn CONFIG_TARGET_BOARD and

Re: [LEDE-DEV] [PATCH] [RFC] build: log time taken by each packages/steps

2018-01-22 Thread John Crispin
On 21/01/18 00:01, Etienne Champetier wrote: The idea is to easily get the list of packages taking the most time to build, and see if we can improve them Sending as RFC as this is a quick hack that might break in some case (different implementation of time) Signed-off-by: Etienne Champetier

Re: [LEDE-DEV] [PATCH iwinfo] nl80211: Do not block when driver aborts scan

2018-01-22 Thread John Crispin
On 09/01/18 15:16, osiverts...@gmail.com wrote: From: Olof Sivertsson Drivers may abort a scan by calling cfg80211_scan_done() with a struct cfg80211_scan_info that sets aborted to true. To avoid blocking forever consider both NL80211_CMD_NEW_SCAN_RESULTS and

Re: [LEDE-DEV] [OpenWrt-Devel] patchwork

2018-01-19 Thread John Crispin
On 19/01/18 08:55, Alexandru Ardelean wrote: On Fri, Jan 19, 2018 at 3:02 AM, Val Kulkov wrote: On 18 January 2018 at 19:49, Alberto Bursi wrote: On 01/19/2018 01:05 AM, Val Kulkov wrote: There is more than a handful of PRs currently

Re: [LEDE-DEV] [OpenWrt-Devel] [PATCH 0/5] x86: add support for microcode update

2018-01-18 Thread John Crispin
On 17/01/18 20:41, Zoltan HERPAI wrote: Hi, This series will add support for microcode update on x86 targets, in light of the recent security issues. While other distributions use an early initramfs approach to update the microcode as early as possible, in OpenWrt the earliest place where we

Re: [LEDE-DEV] [PATCH 1/2] procd/base-files: move init.d locking to rc.common

2018-01-18 Thread John Crispin
On 18/01/18 09:14, John Crispin wrote: rather than using flock for procd enabled services we add locking to the rc.common code. Signed-off-by: John Crispin <j...@phrozen.org> --- package/base-files/files/etc/rc.common | 6 ++ package/system/procd/files/procd.sh

[LEDE-DEV] [PATCH 1/2] procd/base-files: move init.d locking to rc.common

2018-01-18 Thread John Crispin
rather than using flock for procd enabled services we add locking to the rc.common code. Signed-off-by: John Crispin <j...@phrozen.org> --- package/base-files/files/etc/rc.common | 6 ++ package/system/procd/files/procd.sh| 15 --- 2 files changed, 6 insertions(

[LEDE-DEV] [PATCH 2/2] Revert "busybox: enable flock by default"

2018-01-18 Thread John Crispin
This reverts commit 2277cd1249a6952228f36b768beea117c91123a0. Signed-off-by: John Crispin <j...@phrozen.org> --- package/utils/busybox/Config-defaults.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/utils/busybox/Config-defaults.in b/package/utils/busybox/

Re: [LEDE-DEV] [PATCH v2] procd: add timing to start/stop logging

2018-01-17 Thread John Crispin
On 17/01/18 10:54, Koen Vandeputte wrote: On 2018-01-17 10:43, Karl Vogel wrote: Shows how long an initd task took, for example:   procd: stop /etc/init.d/dropbear running - took 0.088824s   procd: Update service dnsmasq   procd: Update instance dnsmasq::dnsmasq   procd: running

Re: [LEDE-DEV] [PATCH] jshn: add functionality to read big JSON

2018-01-17 Thread John Crispin
On 17/01/18 10:44, Arjen de Korte wrote: Citeren John Crispin <j...@phrozen.org>: On 07/01/18 18:08, Christian Beier wrote: The existing read functionality feeds the complete JSON to jshn as a cmdline argument, leading to `-ash: jshn: Argument list too long` errors for JSONs bigger t

Re: [LEDE-DEV] [PATCH 9/9] cns3xxx: remove linux 4.9 support

2018-01-17 Thread John Crispin
Hi merged the first 8 patches, please rework this to additionally fold the irq imbalance patch into the files/... dir     John On 11/01/18 16:04, Koen Vandeputte wrote: Signed-off-by: Koen Vandeputte --- target/linux/cns3xxx/config-4.9|

Re: [LEDE-DEV] [PATCH] jshn: add functionality to read big JSON

2018-01-17 Thread John Crispin
On 07/01/18 18:08, Christian Beier wrote: The existing read functionality feeds the complete JSON to jshn as a cmdline argument, leading to `-ash: jshn: Argument list too long` errors for JSONs bigger than ca. 100KB. This commit adds the ability to read the JSON directly from a file if

Re: [LEDE-DEV] [PATCH] ipq806x: replace linux, part-probe with a proper partitions subnode

2018-01-17 Thread John Crispin
lution made generic by a LEDE downstream patch that can't be upstreamed. [...] Tested-by: Stefan Lippers-Hollmann <s@gmx.de> Acked-by: John Crispin <j...@phrozen.org> [0.00] OF: fdt:Machine model: ZyXEL NBG6817 ... [0.00] Kernel command line: rootfstype=squa

Re: [LEDE-DEV] [PATCH] ar71xx: add support for Ubiquiti Litebeam M5

2018-01-17 Thread John Crispin
On 16/01/18 21:43, Arne Zachlod wrote: Specification: - SoC: Atheros AR9342 - Flash: 8 MiB - RAM: 64 MiB - UART: 1x UART on PCB - 115200 8N1 - Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A) Doesn't work: * Flash via TFTP with Uiquiti Uboot Installation via vendor firmware: - upload

Re: [LEDE-DEV] [PATCH] procd: add timing to start/stop logging

2018-01-17 Thread John Crispin
On 16/01/18 10:49, Karl Vogel wrote: Shows how long an initd task took, for example: procd: stop /etc/init.d/dropbear running - took 0.088824 us procd: Update service dnsmasq procd: Update instance dnsmasq::dnsmasq procd: running /etc/init.d/dnsmasq running procd: start

Re: [LEDE-DEV] [PATCH v4] ar71xx: add ew-balin platform from Embedded Wireless

2018-01-13 Thread John Crispin
Hi, patch is whitespace mangled and does not apply. How did you send the patch ? [...] --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -109,6 +109,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y CONFIG_ATH79_MACH_EPG5000=y CONFIG_ATH79_MACH_ESR1750=y

Re: [LEDE-DEV] Collecting issues on github

2018-01-13 Thread John Crispin
On 12/01/18 20:03, Ted Hess wrote: Hi folks, I would like to propose we close the issues tab on the github/openwrt/openwrt source repository as we did for the lede-project/source repo. We can continue to re-direct people to our bug-tracker for the mainline sources. The packages repo

Re: [LEDE-DEV] [PATCH 1/1] at91: update kernel 4.9.73 to 4.14.11

2018-01-12 Thread John Crispin
On 08/01/18 23:21, Sandeep Sheriker Mallikarjun wrote: update at91 kernel 4.9.73 to 4.14.11 Signed-off-by: Sandeep Sheriker Mallikarjun --- target/linux/at91/Makefile | 2 +- target/linux/at91/{config-4.9

Re: [LEDE-DEV] [PATCH v3] ar71xx: add ew-balin platform from Embedded Wireless

2018-01-12 Thread John Crispin
Hi, few small comments inline. On 11/01/18 11:27, Catrinel Catrinescu wrote: Add the Embedded Wireless "Balin" platform, based on AR9344: http://www.embeddedwireless.de/uploads/Balin_data_2016_10.pdf Can you please write the HW spec into the commit message ? the PDF link might be gone one

Re: [LEDE-DEV] [OpenWrt-Devel] owrt landing page

2018-01-10 Thread John Crispin
call really.     John Thomas -Ursprüngliche Nachricht- Von: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] Im Auftrag von Thomas Endt Gesendet: Samstag, 6. Januar 2018 18:06 An: 'John Crispin'; 'LEDE Development List'; 'LEDE Project Administration'; 'OpenWrt Development

[LEDE-DEV] owrt landing page

2018-01-05 Thread John Crispin
Hi, could someone please help us with rebranding the lede landing page to an openwrt colour/theme ? i would like to see this swithced over within the next 7 days. John ___ Lede-dev mailing list Lede-dev@lists.infradead.org

Re: [LEDE-DEV] [PATCH] procd: Restore respawn on SIGTERM timeout

2018-01-04 Thread John Crispin
On 04/01/18 13:17, Kristian Evensen wrote: On Thu, Oct 19, 2017 at 3:02 PM, Kristian Evensen wrote: When SIGTERM times out, procd sends SIGKILL and then restarts the process once SIGCHLD has been received. This all works fine, with one exception - respawn is not

  1   2   3   4   5   6   >