Re: [LEDE-DEV] [PATCH] kernel: enable pcrypt

On Wed, Nov 16, 2016 at 8:35 PM, Felix Fietkau wrote: > It's in my staging tree and will make it to the main repo soon. Good to hear. Thanks. ___ Lede-dev mailing list Lede-dev@lists.infradead.org

Re: [LEDE-DEV] [PATCH] kernel: enable pcrypt

Hi Felix, Patchwork was changed to "accepted" -- http://patchwork.ozlabs.org/patch/694517/ -- but this hasn't shown up in the actual LEDE repo. What's up? Jason ___ Lede-dev mailing list Lede-dev@lists.infradead.org

Re: [LEDE-DEV] [PATCH] kernel: enable pcrypt

On 2016-11-16 20:35, Jason A. Donenfeld wrote: > Hi Felix, > > Patchwork was changed to "accepted" -- > http://patchwork.ozlabs.org/patch/694517/ -- but this hasn't shown up > in the actual LEDE repo. What's up? It's in my staging tree and will make it to the main repo soon. - Felix

Re: [LEDE-DEV] FCC killing open platforms and inovations [Was: Re: [PATCH] ar71xx: Add usable, inactive LEDs on OpenMesh devices]

Hi David, On Tuesday, November 15, 2016 4:49:40 PM CET David Lang wrote: > > Well, we are. We can't change the fact that the devices need to be locked > > to be sold in the US. But if you google a little, you will find a lot of > > patches for various Open Source projects signed by @open-mesh.com

[LEDE-DEV] [PATCH] scripts/getver.sh: use --count for git rev-list to count commits

From: Rafał Miłecki It should be faster than printing them and piping to the wc. Signed-off-by: Rafał Miłecki --- scripts/getver.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/getver.sh b/scripts/getver.sh index

Re: [LEDE-DEV] [PATCH] mt7621: add support for WeVO W2914NS v2

Hi, Mathias Kresin. It seems its Ethernet LEDs are directly hooked into switch chip. It flashes without defining them in DTB. I dunno about where WLAN LEDs are hooked. I failed to drive them with sysfs gpio driver. I tried LED blinker script in https://wiki.openwrt.org/doc/hardware/port.gpio

[LEDE-DEV] [PATCH] scripts/getver.sh: treat all commits as local if can't find upstream

From: Rafał Miłecki If something goes wrong and script can't find upstream revision it will return something like: r2220 which looks like a valid upstream revision 2220. We cant' distinguish it from e.g. 2200 upstream commits and 20 local ones. The new format still provides

Re: [LEDE-DEV] [wiki] Permalinks to page sections

> If someone stumbles upon the solution for this problem, please let me > know. Since I havn't found any open issue that could cause this, I opened a ticket: https://github.com/LotarProject/dokuwiki-template-bootstrap3/issues/268 Thomas ___ Lede-dev

Re: [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.31

On 16-11-16 09:54, Koen Vandeputte wrote: > Hi Paul, > > First of all, thank you for reviewing and testing the patch. > > > Let me share in detail how I prepare the kernel update patch: > > - Pull the latest git state 3 times > - On two of them, I apply my custom .config and feeds for the hardware

Re: [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.31

Small correction below On 2016-11-16 09:54, Koen Vandeputte wrote: Hi Paul, First of all, thank you for reviewing and testing the patch. Let me share in detail how I prepare the kernel update patch: - Pull the latest git state 3 times - On two of them, I apply my custom .config and feeds

[LEDE-DEV] [wiki] Permalinks to page sections

Hi, There is a small usability issue with the wiki: there is no easy way to get a permalink to a page section (i.e. a link that includes an anchor). First, it would be nice to have a small clickable permalink just beside a section title. Also, there is a bug in the table of contents of a page.

Re: [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.31

> On 16-11-16 09:54, Koen Vandeputte wrote: > - From each seperate build, copy all pathes from > target/linux/"target"/patches-4.4 to the unused git source clone > ("target" being cns3xxx or imx6) Ah, ok. So that's why the things for apm821xx and brcm2708 were not refreshed. I thought a patch

Re: [LEDE-DEV] Package data on the wiki

On 11/16/2016 08:01 AM, Baptiste Jonglez wrote: > Hi, > > I discovered that tons of packages now have their own page in the wiki, > which is nice. It looks automated, what is the source of the data? > > Here are a few observations: > > - I'm not sure the list of architectures is very relevant,

Re: [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.32

On 16-11-16 07:43, p.wa...@gmx.at wrote: > From: Paul Wassi > > Refresh patches for all targets that support kernel 4.4. > compile/run-tested on kirkwood, ar71xx, brcm47xx. > > Signed-off-by: Paul Wassi > --- > This patch is meant to be applied upon 4.4.31! >

Re: [LEDE-DEV] [PATCH] ar71xx: fix drivers/mtd/nand/ar934x_nfc.c

Hi, patch fails to apply to current HEAD. could you check/resend it please John On 16/11/2016 07:25, p.wa...@gmx.at wrote: > From: Paul Wassi > > Fix the incorrect usage of ar934x_nfc_write_page and > ar934x_nfc_write_page_raw. > Add *page* in the argument list and

Re: [LEDE-DEV] [PATCH] ar71xx: fix drivers/mtd/nand/ar934x_nfc.c

> patch fails to apply to current HEAD. could you check/resend it please Just checked again on a new git clone - everything is fine here. Regards, P. Wassi ___ Lede-dev mailing list Lede-dev@lists.infradead.org

Re: [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.31

I started the script to do this for 4.4.31, and I already have more changes than you, so NAK. While I appreciate the effort, I would like to ask you to not send these kind of patches anymore until you are sure you completely understand what you are doing. Ok, noted. I just started playing

[LEDE-DEV] [PATCH] mt7621: add support for WeVO W2914NS v2

From: "Yong-hyu, Ban" Signed-off-by: Yong-hyu, Ban --- .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 +

[LEDE-DEV] [PATCH 1/2] firmware-utils: Add support for the Cisco Meraki MX60/MX60W

This patch adds header support for the Cisco Meraki MX60/MX60W, which are a part of the apm821xx target. Some structure changes were needed due to the fact this device uses U-Boot (unlike other devices in mkmerakifw.c) which uses a different header structure to define the load offsets for the

[LEDE-DEV] [PATCH 0/2] Add support for the Cisco Meraki MX60 & MX60W

These patches add support for the Cisco Meraki MX60 & MX60W Security Appliance. Cc: Christian Lamparter Chris Blake (2): firmware-utils: Add support for the Cisco Meraki MX60/MX60W apm821xx: Add support for the Cisco Meraki MX60/MX60W

[LEDE-DEV] [PATCH 2/2] apm821xx: Add support for the Cisco Meraki MX60/MX60W

This patch adds support for the Cisco Meraki MX60/MX60W Security Appliance. Flashing information can be found at https://github.com/riptidewave93/LEDE-MX60 Specs are as follows: AppliedMicro APM82181 SoC at 800MHz 1GiB NAND - Samsung K9K8G08U0D 512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC Atheros

Re: [LEDE-DEV] [PATCH] ar71xx: fix drivers/mtd/nand/ar934x_nfc.c

On 16 November 2016 at 12:41, wrote: >> patch fails to apply to current HEAD. could you check/resend it please > > Just checked again on a new git clone - everything is fine here. I can confirm it applies cleanly $ curl https://patchwork.ozlabs.org/patch/695452/mbox/ | git am

[LEDE-DEV] [PATCH v2 2/2] apm821xx: Add support for the Cisco Meraki MX60/MX60W

This patch adds support for the Cisco Meraki MX60/MX60W Security Appliance. Flashing information can be found at https://github.com/riptidewave93/LEDE-MX60 Specs are as follows: AppliedMicro APM82181 SoC at 800MHz 1GiB NAND - Samsung K9K8G08U0D 512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC Atheros

[LEDE-DEV] ar71xx: enable serial console on mikrotik devices

This patch enables the serial console on some Mikrotik devices (RB450, RB450G, RB493G, RB750UP). Signed-off-by: João Chaínho diff --git a/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch

[LEDE-DEV] ar71xx: Fix switch config on Mikrotik RB450/G

This patch fixes switch initial config on Mikrotik RB450/G Signed-off-by: João Chaínho --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index df87c96..daf9495 100755 ---

Re: [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.31

* Koen Vandeputte [16.11.2016 17:45]: > 3) > - When a kernel update patch is posted, it requires at least 2 > additional "tested-by"'s on different targets before it can be > considered for merging. (Covering 5 .. 6 targets in total thanks for these insights. i

Re: [LEDE-DEV] [PATCH] ar71xx: fix drivers/mtd/nand/ar934x_nfc.c

On 16/11/2016 16:35, Rafał Miłecki wrote: > On 16 November 2016 at 12:41, wrote: >>> patch fails to apply to current HEAD. could you check/resend it please >> >> Just checked again on a new git clone - everything is fine here. > > I can confirm it applies cleanly > $ curl

Re: [LEDE-DEV] [wiki] Permalinks to page sections

> There is a small usability issue with the wiki: there is no easy way to > get a permalink to a page section (i.e. a link that includes an > anchor). > > First, it would be nice to have a small clickable permalink just beside > a section title. Done. > Also, there is a bug in the table of

Re: [LEDE-DEV] [PATCH] mt7621: add support for WeVO W2914NS v2

Hi, find my comments inline. 2016-11-16 12:47 GMT+01:00 perillamint : > From: "Yong-hyu, Ban" > > Signed-off-by: Yong-hyu, Ban > --- > .../linux/ramips/base-files/etc/board.d/02_network | 1 + >

Re: [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.31

Hi Paul, First of all, thank you for reviewing and testing the patch. Let me share in detail how I prepare the kernel update patch: - Pull the latest git state 3 times - On two of them, I apply my custom .config and feeds for the hardware targets I use (1 for cns3xxx, 1 for imx6) - On each