Hi Daniel,
I work on creating an OpenWrt image which I can just flash over an UGW
(Lantiq's/Intel's OpenWrt distribution) distribution with the normal
U-Boot. Then you do not have to touch the bootloader or the flash layout
and can just run OpenWrt. UGW is mostly focused on NAND flash based
On 05/28/2016 03:36 PM, Dave Taht wrote:
> On Sat, May 28, 2016 at 5:34 AM, Hauke Mehrtens <ha...@hauke-m.de> wrote:
>> On 05/27/2016 12:43 PM, David Lang wrote:
>>> On Thu, 26 May 2016, Delbar Jos wrote:
>>>
>>>> We are conscious of the fact that t
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
.../492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch | 3 ++-
.../492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch | 3 ++-
.../492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch | 5 +++--
3
header at the same position
as in that kernel and add our own at the end. The kernel should not
have a problem when there are some additional members and just ignore
them.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
.../520-squashfs_update_xz_comp_opts.patch
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.
Signed-off-by: Hauke Mehrtens
On 06/22/2016 06:01 PM, Conor O'Gorman wrote:
> On 21/06/16 21:05, Hauke Mehrtens wrote:
>> In the upstream kernel and the upstream squashfs4 tools the xz
>> compression header looks the following:
>> struct disk_comp_opts {
>> __le32 dictionary_siz
Hi,
On 05/21/2016 10:07 AM, Michał Osowiecki wrote:
> Cisco RV042G is Cavium based router with BCM53125 switch and BCM54612E
> connected to port 8, and port 5 acts as cpu port. Probably Linksys
> LRT214 and LRT224 will be affected by this patch too (boards are
> identical).
> I don't know if
On 05/05/2016 10:03 PM, Bert Vermeulen wrote:
> On 05/05/2016 04:09 PM, Hauke Mehrtens wrote:
>> I think we should encourage everyone to upstream the patches, I think in
>> one of the statics I saw that OpenWrt ranked 3. or 4. in contribution to
>> the kernel among the Linux
On 05/05/2016 08:56 AM, John Crispin wrote:
> Hi,
>
> It would be nice if there was a process in place that would allow
> community members to easily be able to test images on devices and report
> the results some place. after some time thinking of different ways to do
> this I came up with one
On 05/04/2016 11:49 PM, Vittorio G (VittGam) wrote:
> Hi,
>
> On 04/05/2016 22:30:40 CEST, Bert Vermeulen wrote:
>> Hi all,
>>
>> Very happy to see this project reboot happening. An acknowledgement of
>> the issues facing OpenWRT was long overdue. I'd like some clarity on
>> some things that
Hi John,
How does the Lantiq NAND sysupgrade stuff work?
I see there are sysupgrade packages with a squasfs and a ubifs root file
system. Are both file systems still supported and needed? I see that
other targets only have a squasfs support.
Do the devices with NAND flash all use UBI by default
On 05/06/2016 10:04 AM, Bruno Randolf wrote:
> Hi,
>
> Taking this from lede-adm to lede-dev where I'm allowed to post...
no problem.
> On 06/05/16 02:33, Alexander Couzens wrote:
>>> +== What devices does LEDE targets?
>>> +
>>> +LEDE mainly targets embedded devices capable of running Linux.
add lede-dev
On 05/24/2016 10:31 PM, Hauke Mehrtens wrote:
> Hi,
>
> As it looks like the IRC meeting will not happen, because not so big
> interest by the people not already involved in LEDE and problems finding
> a time, lets discuss on the mailing list like suggested by Jow.
On 07/13/2016 03:44 PM, Hauke Mehrtens wrote:
> The removed patch is already integrated in upstream musl.
>
> Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
> ---
> toolchain/musl/Config.version |2 +-
> toolchain/musl/common.mk
check if svn is installed in ipkg-build before assigning it. This
script is run with set -e and will fail if "which svn" does not return
0.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
scripts/ipkg-build | 12
1 file changed, 8 insertions(+), 4 deletion
,
OpenWrt Summit Committee
Abhijit Mahajani
Beda Kosata
Eric Schultz
Federico Capoano
Hans Dedecker
Hauke Mehrtens
Imre Kaloz
Kathy Giori
Luka Perkov
Paul Blay
Zoltan Herpai
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org
If you have any questions,
don't hesitate to ask any of us.
Thanks,
OpenWrt Summit Committee
Abhijit Mahajani
Beda Kosata
Eric Schultz
Federico Capoano
Hans Dedecker
Hauke Mehrtens
Imre Kaloz
Kathy Giori
Luka Perkov
Paul Blay
Zoltan Herpai
___
Le
This was tested on a lantiq, brcm47xx and bcm53xx device.
Hauke Mehrtens (3):
gcc: update gcc to version 5.4.0
musl: update musl to version 1.1.15
musl: remove sh3 workaround
toolchain/gcc/Config.version |2 +-
toolchain/gcc/common.mk
The GCC bug 67260 is fixed upstream now, remove this workaround.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
toolchain/musl/common.mk | 6 --
1 file changed, 6 deletions(-)
diff --git a/toolchain/musl/common.mk b/toolchain/musl/common.mk
index de00ea0..aa17899
The removed patch is already integrated in upstream musl.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
toolchain/musl/Config.version |2 +-
toolchain/musl/common.mk |2 +-
.../patches/001-update-to-git-2016-03-06.patch
The removed patches are already integrated in upstream gcc.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
toolchain/gcc/Config.version | 2 +-
toolchain/gcc/common.mk| 4 +-
.../5.3.0/030-fix-arm-codegen-PR-65932.patch
Without this patch only the first dependency is shown, with this patch
all module dependencies are show.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
kmodloader.c | 19 +++
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/kmodloader.c b/kmodloader.c
an Lamparter wrote:
>> On Wednesday, June 29, 2016 11:13:01 PM Hauke Mehrtens wrote:
>>> From: Hauke Mehrtens <hauke.mehrt...@intel.com>
>>>
>>> Extract the other p54 firmware files into the prism54-firmware package.
>>>
>>> Signed-off-by:
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
Instead of downloading the firmware for prism54 devices in the
wireless.mk do it in an extra package Makefile. To ship the complete
source code Intel ships our modified OpenWrt/LEDE + the content of the
dl directory. We do not want to have any
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
Extract the other p54 firmware files into the prism54-firmware package.
Signed-off-by: Hauke Mehrtens <hauke.mehrt...@intel.com>
---
package/firmware/prism54-firmware/Makefile | 75 --
package/kernel/mac80
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
The libmagic shipped with RedHat 5 does not define
MAGIC_NO_CHECK_COMPRESS and MAGIC_NO_CHECK_COMPRESS. e2fsprogs should
check for that otherwise the build will fail.
Signed-off-by: Hauke Mehrtens <hauke.mehrt...@intel.com>
---
too
On 07/02/2016 03:20 PM, Baptiste Jonglez wrote:
> Hi,
>
> I am packaging a new kernel module (wireguard), the package is currently here
> [1].
>
> However, I have some trouble understanding what KCONFIG does. Wireguard
> needs a few kernel options, so I thought that KCONFIG was the place to
>
On 07/02/2016 05:38 PM, Baptiste Jonglez wrote:
> On Sat, Jul 02, 2016 at 04:55:28PM +0200, Baptiste Jonglez wrote:
>> I think I found the cause of the issue: the packages kmod-udptunnel4.ipk
>> and kmod-udptunnel6.ipk are generated, but are empty (no .ko file). When
>> I activate the kernel
rxkad will be build into af-rxrpc now and is of type boolean.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
package/kernel/linux/modules/netsupport.mk | 4 ++--
target/linux/generic/config-4.9| 3 +++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/p
Hi Felix,
On 2017-02-28 07:11, Felix Fietkau wrote:
On 2017-02-20 15:10, Mehrtens, Hauke wrote:
When I compile MIPS malta with the LEDE patches on kernel 4.9 I get
this error in the kernel build:
CC arch/mips/boot/compressed/decompress.o
OBJCOPY arch/mips/boot/compressed/vmlinux.bin
On 09/24/2016 12:07 AM, Martin Blumenstingl wrote:
> Currently the initialization of the RT3062F wifi chip fails on
> VGV7510KW22 because the updated busybox shell does not like the usage
> of the "local" keyword outside of functions.
> This was reported by Dennis Schneck (see [0]):
>>
Hi,
I updated the ppc44x target to kernel 4.4 in this branch:
https://git.lede-project.org/?p=lede/hauke/staging.git;a=shortlog;h=refs/heads/kernel-4.4
If you have any device supported by this target please test it and
report back if the ppc44x target is still working with kernel 4.4 like
with
Hi,
I updated the rb532 target to kernel 4.4 in this branch:
https://git.lede-project.org/?p=lede/hauke/staging.git;a=shortlog;h=refs/heads/kernel-4.4
If you have any device supported by this target please test it and
report back if the rb532 target is still working with kernel 4.4 like
with the
Hi,
I updated the xburst target to kernel 4.4 in this branch:
https://git.lede-project.org/?p=lede/hauke/staging.git;a=shortlog;h=refs/heads/kernel-4.4
If you have any device supported by this target please test it and
report back if the xburst target is still working with kernel 4.4 like
with
Hi,
I updated the ar7 target to kernel 4.4 in this branch:
https://git.lede-project.org/?p=lede/hauke/staging.git;a=shortlog;h=refs/heads/kernel-4.4
If you have any device supported by this target please test it and
report back if the ar7 target is still working with kernel 4.4 like
with the old
cd config
../convert_menuconfig.pl .../build_dir/target-*/busybox-1.25.0
cd ..
./convert_defaults.pl < .../build_dir/target-*/busybox-1.25.0/.config >
Config-defaults.in
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
package/utils/busybox/Config-defaults.in
On 09/19/2016 10:07 AM, Roman Yeryomin wrote:
> On 2016-09-18 18:22, Hauke Mehrtens wrote:
>> Hi,
>>
>> I updated the rb532 target to kernel 4.4 in this branch:
>> https://git.lede-project.org/?p=lede/hauke/staging.git;a=shortlog;h=refs/heads/kernel-4.4
>>
>&
On 08/28/2016 11:51 AM, Gareth Parker wrote:
> Just built LEDE from latest source and get a jffs2 error on the Ubiquiti
> UAP-PRO. The errors continue on down the screen for several pages before
> the device crashes and reboots again in a loop. Openwrt doesn't have this
> problem.
Hi,
What was
On 08/28/2016 10:31 AM, Mathias Kresin wrote:
> Am 27.08.2016 um 19:44 schrieb Juan Rios:
>> Hello,
>>I managed to get this router and want to get lede on it. The
>> hardware is this
>>
>> Lantiq VRX288 500Mhz
>> 2 NANYA NT5TU128M8HE-AC 256MB RAM
>> ZENTEL A501GA31ATS 8G 128MB NAND FLASH.
>>
/ott/2016 01:59 AM, "Hauke Mehrtens" <ha...@hauke-m.de
> <mailto:ha...@hauke-m.de>> ha scritto:
>
> On 09/23/2016 09:02 PM, Daniel Golle wrote:
> > On Fri, Sep 23, 2016 at 08:14:24PM +0200, Dennis Schneck wrote:
> >>
> >>
>
Hi Daniel,
This sounds interesting.
I have some questions regarding phase 1.
1. Do you want to have an API to switch for example a smart plug on and
off and an other call to get the temperature from a temperature sensor?
2. Should this more focus on local IoT sensors line a temperature sensor
ybe it can be applied to lantiq
>> asterisk-tapi
>>
>> Regards
>>
>> On Mon, Oct 3, 2016 at 1:56 AM, Hauke Mehrtens <ha...@hauke-m.de> wrote:
>>> On 09/23/2016 09:02 PM, Daniel Golle wrote:
>>>> On Fri, Sep 23, 2016 at 08:14:24PM +0200, Denni
This makes it possible to activate the gpio and the pinctl debugging
from LEDE menuconfig.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
config/Config-kernel.in | 8
1 file changed, 8 insertions(+)
diff --git a/config/Config-kernel.in b/config/Config-kernel.in
index d
This just adds the kmods for these kernel modules.
This is found on some Lantiq / Intel reference boards.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
package/kernel/linux/modules/hwmon.mk | 30 ++
1 file changed, 30 insertions(+)
diff --git a/package/
On 12/08/2016 02:00 PM, John Crispin wrote:
>
>
> On 07/12/2016 22:45, Hauke Mehrtens wrote:
>> This just adds the kmods for these kernel modules.
>> This is found on some Lantiq / Intel reference boards.
>>
>> Signed-off-by: Hauke Mehrtens <ha...@hauke-m
On 12/09/2016 08:08 AM, John Crispin wrote:
>
>
> On 09/12/2016 00:21, Hauke Mehrtens wrote:
>> This was introduced in kernel 4.4, but broken there and fixed in 4.5.
>> I would like to activate it, but I am scared about the boot loader
>> around giving us all sorts of
These options are needed to create /dev/mem or /dev/kmem .
/dev/mem is needed by the io tool to access raw hardware memory, which
is helpful when debugging and developing drivers.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
config/Config-kernel.in | 14 ++
1 file chang
On 2016-12-05 11:57, Daniel Golle wrote:
Hi Felix,
On Thu, Dec 01, 2016 at 04:51:30PM +0100, Felix Fietkau wrote:
On 2016-12-01 16:38, Daniel Golle wrote:
> Hi Felix,
>
> On Thu, Dec 01, 2016 at 04:12:38PM +0100, Felix Fietkau wrote:
>> On 2016-12-01 16:05, Daniel Golle wrote:
>> > I was
This makes the code use the same settings aas the vendor sdrivers.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/lantiq/dts/amazonse.dtsi | 3 +-
target/linux/lantiq/dts/ar9.dtsi | 6 +-
target/linux/lantiq/dts/danub
On 01/06/2017 08:26 PM, Martin Blumenstingl wrote:
> Hi Hauke,
>
> (CC'ing Mathias as he was looking into some of the USB issues as well)
>
> On Fri, Jan 6, 2017 at 8:06 PM, Hauke Mehrtens <ha...@hauke-m.de> wrote:
>> This makes the code use the same settings aas t
Please do not send a mail with just an attachment, oldpackage is frozen
since some years, please send add the package to the official openwrt
package repository, add yourself as a maintainer and send a pull request
on github.
On 01/06/2017 08:19 PM, Philip Prindeville wrote:
On 01/07/2017 07:51 PM, Hauke Mehrtens wrote:
> On 01/07/2017 07:29 PM, Hauke Mehrtens wrote:
>> This adds USB initialization fixes for Danube, Amazon SE and xrx300 and
>> should fix the clock on at least Danube which hopefully fixes FS#351.
>>
>> The xrx200 usb
On 01/07/2017 12:25 PM, Antti Seppälä wrote:
> On 7 January 2017 at 04:01, Hauke Mehrtens <ha...@hauke-m.de> wrote:
>> On 01/06/2017 11:31 PM, Antti Seppälä wrote:
>>> On 6 January 2017 at 21:32, Hauke Mehrtens <ha...@hauke-m.de> wrote:
>>>> On 01/0
On 01/07/2017 07:29 PM, Hauke Mehrtens wrote:
> This adds USB initialization fixes for Danube, Amazon SE and xrx300 and
> should fix the clock on at least Danube which hopefully fixes FS#351.
>
> The xrx200 usb driver now uses more memory for the dwc2 fifos, this was
> increa
and the vendor Code base.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
If some of these dwc2 values should be changed, please suggest changes,
I am not an expert on this.
This was only tested on vrx200 devices not on any other SoC, please
test and report back, I would like
Hi,
It looks like the kernel prefers the console parameter given in the boot
command line over the stdout-path parameter. On some boards the boot
loader provides this parameter to the kernel and then the serial does
not work. At least the VR200v, ARV4518pw and ARV7518pw are affected:
On 01/01/2017 11:21 AM, Mathias Kresin wrote:
> The clock source is set by the ltq-hcd driver but are not by the
> dwc2 driver. Without having the correct clock set the dwc driver
> fails to reset the usb core and errors out. The values for supported
> lantiq targets are exactly the same as set
0 2016 +0100
lantiq: specify console using stdout-path instead of cmdline argument
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/lantiq/dts/ACMP252.dts | 4
target/linux/lantiq/dts/ARV4510PW.dts | 4
target/linux/lantiq/dts/ARV4518PWR01.dtsi | 4
We had multiple meetings to find a solution to solve the problems
between the OpenWrt and the LEDE project and to discuss a possible
merge. Everyone with commit access to LEDE and all OpenWrt core
developers were invited to these meetings. We had productive and
friendly discussions about the
On 12/28/2016 09:41 PM, Ben Mulvihill wrote:
> On Wed, 2016-12-28 at 19:26 +, Mohammed Berdai wrote:
>> Hi,
>>
>> I managed to test the latest LEDE commits after missing daily tests for a
>> few weeks due to a busy schedule.
>>
>> The switch to dwc2 module caused kernel panics on ARV4518pw,
On 12/25/2016 07:12 PM, Martin Blumenstingl wrote:
> Hi John, Hi Hauke,
>
> On Fri, Dec 9, 2016 at 8:08 AM, John Crispin <j...@phrozen.org> wrote:
>>
>>
>> On 09/12/2016 00:21, Hauke Mehrtens wrote:
>>> This was introduced in kernel 4.4, but broke
On 2017-03-30 14:25, hauke.mehrt...@intel.com wrote:
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
Commit 5c20a4fec923c3 ("ubox: turn logd into a separate package")
changed
the PKG_SOURCE_DATE which is also included in the tar file. This change
resulted in a new tar with
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
Commit 5c20a4fec923c3 ("ubox: turn logd into a separate package") changed
the PKG_SOURCE_DATE which is also included in the tar file. This change
resulted in a new tar with a different hash, but the sha256 hash was not
updated. Fix
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
The sha256sum added in commit b8567cb44e9e4f ("odhcpd: update to git HEAD
version (FS#396)") does not match the sha256sum of the file on the mirror or
when I clone it. Update the sha256 sum to the correct value.
Signed-off-by
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
Without this change the code checked if the string was contained in the
feature option and not if the string matches the complete word. This only
removes the nand option from the omap24xx target, the other changes are
only removing options
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
This can be used to indicate that a target does not support the optional mips16
extension even when it is a mips32r2 or later CPU.
This will generate a separate toolchain and a separate package folder,
e.g. mips_24kc_nomips16
Signed-off-by:
On 2017-03-14 18:34, Florian Fainelli wrote:
On 03/14/2017 10:28 AM, Hauke Mehrtens wrote:
On 2017-03-14 18:20, Florian Fainelli wrote:
On 03/14/2017 05:28 AM, hauke.mehrt...@intel.com wrote:
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
musl provides a /lib/libc.so file which
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
musl provides a /lib/libc.so file which should be integrated into the libc
package when the external toolchain with musl is used.
Signed-off-by: Hauke Mehrtens <hauke.mehrt...@intel.com>
---
package/libs/toolchain/Makefile | 2 +-
1
This year's OpenWrt/LEDE summit should take place in Prague in October
around Embedded Linux Conference Europe (ELCE). OpenWrt/LEDE summit 2017
will not be collocated with ELCE and be free of charge as of the current
planning. This event is in the early planning phase, see the website of
last
On 03/14/2017 10:46 PM, Felix Fietkau wrote:
> On 2017-03-14 18:55, hauke.mehrt...@intel.com wrote:
>> From: Hauke Mehrtens <hauke.mehrt...@intel.com>
>>
>> This can be used to indicate that a target does not support the optional
>> mips16
>> extension
On 04/02/2017 05:02 PM, Baptiste Jonglez wrote:
> Hi,
>
> I am currently adding LEDE support for the Netgear DM200 VDSL modem
> [https://wiki.openwrt.org/toh/netgear/dm200], which uses a Lantiq VR9 SoC.
>
> I was able to boot LEDE from RAM, and got the LEDs working, but I cannot
> get the flash
On 04/02/2017 05:48 PM, Hauke Mehrtens wrote:
> On 04/02/2017 05:02 PM, Baptiste Jonglez wrote:
>> Hi,
>>
>> I am currently adding LEDE support for the Netgear DM200 VDSL modem
>> [https://wiki.openwrt.org/toh/netgear/dm200], which uses a Lantiq VR9 SoC.
>>
&g
binutils 2.27 checks if the target compiler supports -Wstack-
usage=262144, and also uses this setting for the host compiler. If the
host compiler is gcc < 4.9 binutils build will fail. This backports 2
commits which are fixing this problem for binutils 2.28.
Signed-off-by: Hauke Mehrtens
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
Fix build of scriptreplay with uClibc.
Some parts of the libm detected were backported to 2.29.2, but some parts
were missing, which are added here.
Signed-off-by: Hauke Mehrtens <hauke.mehrt...@intel.com>
---
This should also go int
On 04/16/2017 01:41 PM, yanosz wrote:
> Hello,
>
> CVE-2016-10229 was patched in android recently. While some distributions
> (ie Debian: https://security-tracker.debian.org/tracker/CVE-2016-10229)
> are not vulnerable due to having backported parts of the kernel code
> before, I wonder about the
On 03/03/2017 09:12 PM, Philip Prindeville wrote:
> I dug into this… Problem was with CONFIG_EXTRA_OPTIMIZATION having “-fno-plt”
> in it.
>
> This was being passed into the ‘gcc’ that was being used to bootstrap gcc.
>
> Wondering if that’s not a bug.
>
> Shouldn’t the build of the cross-gcc
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
musl provides a /lib/libc.so file which should be integrated into the libc
package when the external toolchain with musl is used.
Signed-off-by: Hauke Mehrtens <hauke.mehrt...@intel.com>
---
package/libs/toolchain/Makefile | 2 +-
1
On 2017-03-14 18:20, Florian Fainelli wrote:
On 03/14/2017 05:28 AM, hauke.mehrt...@intel.com wrote:
From: Hauke Mehrtens <hauke.mehrt...@intel.com>
musl provides a /lib/libc.so file which should be integrated into the
libc
package when the external toolchain with musl is used.
Sign
This adds initial support for the A64 Allwinner SoC to LEDE.
It will be build in the new cortexa53 subtarget.
Currently it only supports the pine64 and the image is able to boot on
this SoC.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/sunxi/Makefile
These are needed for the sunxi target.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/generic/config-4.9 | 10 ++
1 file changed, 10 insertions(+)
diff --git a/target/linux/generic/config-4.9 b/target/linux/generic/config-4.9
index 24bbbc0587..79d7dcb883
Most of the patches were backpoprts from the mainline kernel and are
integrated upstream now.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/sunxi/Makefile| 2 +-
target/linux/sunxi/config-4.9
This is needed for the Boot loader of the A64 SoC.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
package/boot/arm-trusted-firmware-sunxi/Makefile | 51
1 file changed, 51 insertions(+)
create mode 100644 package/boot/arm-trusted-firmware-sunxi/Makefile
If the Kconfig option CONFIG_RTC_DRV_SUNXI is not selected this package
should be be build.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/sunxi/modules.mk | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/sunxi/modules.mk b/target
Hi,
The OpenWrt summit takes place in Prague on 26. and 27. October
directly after the ELCE in Prague, but in a different hotel.
More details can be found here:
http://www.openwrtsummit.org/
Just forwarding Shelly's mail with the informations about the CFP which
is still open till end of
On 08/08/2017 01:13 AM, Lucian Cristian wrote:
> On 07.08.2017 19:47, Lucian Cristian wrote:
>> On 07.08.2017 19:43, Hauke Mehrtens wrote:
>>> ...
>>>>
>>> Hi Lucian,
>>>
>>> The eMMC version needs an extra device tree file, could you
a delay of 4289967.657
ms.
1.000.000 calls to clock_gettime(CLOCK_MONOTONIC, ); take 1 second
without VDSO support and 0.35 seconds with VDSO support on Lantiq VR9.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
...MIPS-work-around-aliasing-issue-with-VDSO.patc
m>
> Cc: John Crispin <j...@phrozen.org>
> Cc: Hauke Mehrtens <ha...@hauke-m.de>
> ---
>
> Changes v1 -> v2:
> *In toolchain/gcc/common.mk add '-release' to line 'PKG_REV:=2017.03'.
> Now it is 'PKG_REV:=2017.03-release' and symlink at
>
The selected CFLAGS are already set by default.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/layerscape/64b/target.mk | 1 -
1 file changed, 1 deletion(-)
diff --git a/target/linux/layerscape/64b/target.mk
b/target/linux/layerscape/64b/target.mk
index 22ef
On 07/18/2017 11:12 AM, Alexey Brodkin wrote:
> Hi Hauke,
>
>> -Original Message-----
>> From: Hauke Mehrtens [mailto:ha...@hauke-m.de]
>> Sent: Saturday, July 15, 2017 1:18 AM
>> To: Evgeniy Didin <evgeniy.di...@synopsys.com>; lede-dev@lists.infradead.or
On 07/02/2017 04:27 PM, Jo-Philipp Wich wrote:
> Hi,
>
> I think you're supposed to use "lede-brcm47xx-legacy-standard-squashfs.trx".
>
> ~ Jo
Thanks it works with that image, it was some time ago I flashed an image
to my brcm47xx devices.
But there is some code in the platform sysupgrade code
On 06/25/2017 05:14 PM, Stefan Tomanek wrote:
> Tested on TP-Link Archer C7
>
> Signed-off-by: Stefan Tomanek
> ---
> utils/triggerhappy/Makefile |9 -
> 1 file changed, 4 insertions(+), 5 deletions(-)
The package feed is maintained here:
On 06/26/2017 05:03 PM, Evgeniy Didin wrote:
> arc-2017.03 is the most recent release toolchain for ARC cores
> and it is based on upstream Binutils 2.28 and GCC 6.3.0
>
> Signed-off-by: Evgeniy Didin
> Cc: Alexey Brodkin
> Cc: John Crispin
Hi,
I just tried to run sysupgrade on a WRT53GS (brcm47xx) device and it
failed. I am running LEDE r4504.
Hauke
root@LEDE:/tmp# wget
http://192.168.1.195/hauke-web/lede/targets/brcm47xx/legacy
/lede-brcm47xx-legacy-linksys-wrt54gs-squashfs.bin
Downloading
Some days ago I received an invitation from the Bundesamt für Sicherheit
in der Informationstechnik (BSI) (English: Federal Office for
Information Security) to a kickoff meeting regarding the “Technische
Richtlinie Breitband-Router” (English: Technical guideline broadband
router) in Bonn, Germany
On 06/26/2017 11:59 PM, Hauke Mehrtens wrote:
> On 06/10/2017 03:13 PM, Hauke Mehrtens wrote:
>> Hi,
>>
>> As many already acknowledged this proposal I would like to call for an
>> official vote among the LEDE committers till 14.6.2017 on this proposal.
>>
On 08/04/2017 12:07 AM, Tom Psyborg wrote:
> fix your patch title
Thanks, I will fix it.
Hauke
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
On 07/30/2017 05:57 PM, Baptiste Jonglez wrote:
> From: Baptiste Jonglez
>
> Since mbedtls 2.5.1, SHA1 has been disallowed in TLS certificates.
> This breaks openvpn clients that try to connect to servers that
> present a TLS certificate signed with SHA1, which is fairly
On 08/07/2017 06:13 PM, Lucian Cristian wrote:
> On 07.08.2017 18:55, Hauke Mehrtens wrote:
>>
>> On 08/06/2017 08:16 PM, Lucian Cristian wrote:
>>> On 04.08.2017 00:37, Hauke Mehrtens wrote:
>>>> This upgrades the target to kernel 4.9 and also adds su
y
boards with USB configured in device only mode out there and did it ever
worked with LEDE?
Hauke
>
> Regards.
>
> 2017-08-04 18:41 GMT+02:00 Hauke Mehrtens <ha...@hauke-m.de>:
>>
>>
>>
>> On 07/29/2017 02:54 PM, Daniel Gonzalez Cabanelas wrote:
>>> USB d
Thanks for moving this forward.
On 05/08/2017 03:19 PM, John Crispin wrote:
> *) github
.
>
> - obsolete the lede github org after a grace period of 3-6 months
As long as it does not cost us effort I would like to keep the lede
domains and github project up running for longer.
> *) landing
1 - 100 of 393 matches
Mail list logo