Re: [LEDE-DEV] [PATCH 5/5] ar71xx: add support for D-Link DAP-2695 rev. A1

[Stijn Tintel]

On 12-09-16 06:10, Yousong Zhou wrote:
> On 12 September 2016 at 00:12, Stijn Tintel  wrote:
>> Signed-off-by: Stijn Tintel 
>> ---
>>  package/boot/uboot-envtools/files/ar71xx   |   1 +
>>  target/linux/ar71xx/base-files/etc/board.d/01_leds |   5 +
>>  .../linux/ar71xx/base-files/etc/board.d/02_network |   5 +
>>  .../etc/hotplug.d/firmware/11-ath10k-caldata   |   4 +
>>  .../base-files/etc/uci-defaults/09_fix-checksum|   9 +
>>  target/linux/ar71xx/base-files/lib/ar71xx.sh   |   3 +
>>  .../ar71xx/base-files/lib/upgrade/platform.sh  |  13 ++
>>  target/linux/ar71xx/config-4.4 |   1 +
>>  .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   |   9 +
>>  target/linux/ar71xx/files/arch/mips/ath79/Makefile |   1 +
>>  .../files/arch/mips/ath79/mach-dap-2695-a1.c   | 191 
>> +
>>  .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |   1 +
>>  target/linux/ar71xx/image/generic.mk   |  38 
>>  13 files changed, 281 insertions(+)
>>  create mode 100644 
>> target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
> We have just got rid of the 09_fix-seama-header by excluding jffs2
> marker from the calculation of checksum.  The result image flashes
> just fine because it looks like the device will flash the whole
> uploaded file instead of just the size in the image header.  If that
> is also the case with fixwrgg then we can save a few flash block
> erases.
This works fine for sysupgrade images, and when flashing via the
bootloader. Unfortunately such image doesn't flash via the web interface
of the stock firmware.

Stijn

___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev

Re: [LEDE-DEV] [PATCH 5/5] ar71xx: add support for D-Link DAP-2695 rev. A1

[Yousong Zhou]

On 12 September 2016 at 00:12, Stijn Tintel  wrote:
> Signed-off-by: Stijn Tintel 
> ---
>  package/boot/uboot-envtools/files/ar71xx   |   1 +
>  target/linux/ar71xx/base-files/etc/board.d/01_leds |   5 +
>  .../linux/ar71xx/base-files/etc/board.d/02_network |   5 +
>  .../etc/hotplug.d/firmware/11-ath10k-caldata   |   4 +
>  .../base-files/etc/uci-defaults/09_fix-checksum|   9 +
>  target/linux/ar71xx/base-files/lib/ar71xx.sh   |   3 +
>  .../ar71xx/base-files/lib/upgrade/platform.sh  |  13 ++
>  target/linux/ar71xx/config-4.4 |   1 +
>  .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   |   9 +
>  target/linux/ar71xx/files/arch/mips/ath79/Makefile |   1 +
>  .../files/arch/mips/ath79/mach-dap-2695-a1.c   | 191 
> +
>  .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |   1 +
>  target/linux/ar71xx/image/generic.mk   |  38 
>  13 files changed, 281 insertions(+)
>  create mode 100644 
> target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c

We have just got rid of the 09_fix-seama-header by excluding jffs2
marker from the calculation of checksum.  The result image flashes
just fine because it looks like the device will flash the whole
uploaded file instead of just the size in the image header.  If that
is also the case with fixwrgg then we can save a few flash block
erases.

yousong

___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev