2017-05-17 12:18 GMT+02:00 kysonlok <kyson...@gmail.com>: > This patch adds supports for the GL-inet GL-MT300N-V2. > > Specification: > - SoC: MediaTek MT7628AN > - Flash: 16 MiB (W25Q128FVSG) > - RAM: 128 MiB DDR > - Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps) > - USB: 1 x USB 2.0 port > - Button: 1 x switch button, 1 x reset button > - LED: 3 x LEDS (system power led is not GPIO controller) > - UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND) > > Installation through Luci: > - The original firmware is LEDE, so both LuCI or sysupgrade can be used. > - Do not keep settings, for sysupgrade please use the -n option. > > Installation through bootloader webserver: > - Plug power and hold reset button until red LED blink to bright. > - Install sysupgrade image using web interface on 192.168.1.1. > > Signed-off-by: kyson Lok <kyson...@gmail.com> > --- > target/linux/ramips/base-files/etc/board.d/01_leds | 3 + > .../linux/ramips/base-files/etc/board.d/02_network | 4 + > target/linux/ramips/base-files/etc/diag.sh | 3 + > target/linux/ramips/base-files/lib/ramips.sh | 3 + > .../ramips/base-files/lib/upgrade/platform.sh | 1 + > target/linux/ramips/dts/GL-MT300N-V2.dts | 133 > +++++++++++++++++++++ > target/linux/ramips/image/mt7628.mk | 8 ++ > 7 files changed, 155 insertions(+) > create mode 100644 target/linux/ramips/dts/GL-MT300N-V2.dts
Merged to my staging tree with a little bugfix. Will push it to master during the next days. Thanks! _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev