I use my legacy to round out turning blanks all the time. WAY less
scary and faster too.
Paul
On 6/10/20 10:27 PM, 'Curt George' via Legacy Ornamental Mills wrote:
Hello Everyone.
I was talking to a friend on mine about turning large pieces of wood
on the lathe. If the wood is not
I’ve often thought of making a thin stock support that attaches to the
carriage as a “follower” rather than the fixed position solutions. Would
be a good bit tricky but might work better for long spindles
Paul
On Sat, Mar 14, 2020 at 2:08 PM 'Curt George' via Legacy Ornamental Mills <
Very clever. I think I like it. I have a lot of rough saw stock that
needs a flat side before I take it to the planer. This looks to be perfect
for the job. Well done!
On Sat, Mar 7, 2020 at 1:51 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
I don’t know, it looks like it would wobble a lot to me.嵐藍
On Sat, Feb 15, 2020 at 2:19 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> A new toy! ;-)
>
> I picked up an OLD jam chuck,(parts were missing so I picked it up for
> $10.00/Scrap
Looks like it might be missing a tail stock as well. The real question is
whether the rest of the goodies are with it.
Paul
On Mon, Feb 3, 2020 at 3:19 PM wrote:
> Also not working it from underneath I don’t think this guy knows much
> about the legacys and no crakes about upside down and how
It’s alive, it’s alive, Frankenmachine lives!浪浪
Very credible! I would imagine that the linear rails, at lease the x-axis
ones, greatly increases the rigidity of the machine. Why did you place the
router out so far from the z-axis? Does it have enough rigidity to produce
accurate work?
By all
Check Fastcap.com, leevalley.com, or perhaps rockier.
Paul
>
>
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
ent: Dec 13, 2019 12:07 PM
>>> To: legacy-ornamental-mills@googlegroups.com
>>> Subject: Re: Legacy assembly manuals
>>>
>>> I'd also be interested. Will you post the particulars as to how this
>>> can happen (i.e., cost, etc.)?
>>>
>>>
I’ve found the original assembly manual to my 1200 as well as the Z axis
assembly manual. Is there any interest in my scanning and posting them?
About 60 pages all together.
Paul
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills"
om/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *Paul Richmond <4pea...@gmail.com>
> *Sent: *Wednesday, December 11, 2019 8:51 PM
> *To: *legacy-ornamental-mills@googlegroups.com
> *Subject: *Re: Legacy 1800 CNC for sale, and is CNC an option for the
> occasional
Joe: I can’t seem to message or e-mail you directly but I am interested in
your CNC upgrade. Please call or message me.
Paul Richmond
4pea...@gmail.com
360-440-0065
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To u
I am very interested but can’t get the link to work. Is there a time that
would be convenient to call and talk about it?
Paul Richmond
360-440-0065
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from
Yes, but free wood is the best of all...
On Wed, Nov 27, 2019 at 11:51 AM Tim Ziegler wrote:
> Hey Mark absolutely all wood is good wood. And is beautiful in the eyes of
> the beholder. You are probably going to want to get it dried if you
> want to use it right away. Other wise it will twist
There is a video on the design kit located in the Videos directory of the
following link;
https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t?usp=sharing
Not the greatest quality but better than nothing.
Paul
--
You received this message because you are subscribed to the
I have uploaded four old Legacy Mill related videos to the shared document
site. They ain't great but if you are desperate, they may help. The
following is a sharable link to the parent directory. You will find them
in the Videos folder.
My contribution to the community... I will be adding my legacy docs and
sources here for all. Anyone with files that you wish to share drop them in
the Upload directory as I have enabled open sharing on it. Periodically I will
organize and move it up to the read only directory below.
Feel
Very cool!
Sent from my iPad
> On Jul 21, 2019, at 10:09 PM,
> wrote:
>
>
>Missed a couple
>
> Bill
>
>
> From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of bulke...@mmnet.com.au
> Sent: Monday, 22 July 2019 3:01 PM
> To:
I’m a new member to the group and a long time Legacy Mill owner. (I bought the
display model off the show floor at the Seattle Woodworkers show.)
I have a 1200 with power feed and about every attachment that Legacy has made
for it. I have used it on a number of small projects but my single
18 matches
Mail list logo
