legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Friday, 27 November 2020 2:41 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Disassembly/Reassembly of Z-axis Carriage Assembly - Model
> 1200
-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Friday, 27 November 2020 2:41 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Disassembly/Reassembly of Z-axis Carriage Assembly - Model 1200
Sure wish we could just ship to you.
I've shipped to Malaysia shouldnt
r 2020 1:21 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Disassembly/Reassembly of Z-axis Carriage Assembly - Model
> 1200
>
>
>
> I'm sold. If you did that level of research and came down on dyna-glide,
> and everyone else on here seems to think it's the bes, I'
ls@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Ray Leaman
>> *Sent:* Friday, 27 November 2020 10:47 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Disassembly/Reassembly of Z-axis Carriage Assembly -
>&g
gt;
> Any dry lube is ok its just dyna is the best
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Ray Leaman
> *Sent:* Friday, 27 November 2020 10:47 AM
> *To:* legacy-ornamental-
: Disassembly/Reassembly of Z-axis Carriage Assembly - Model 1200
I was wondering about that but where I used the little bit of grease I used is
where the legacy instructions said to use it.
I noticed most on here speak highly of dyna-glide but there are other
lubricants out there. May
t;
Subject: Disassembly/Reassembly of Z-axis Carriage Assembly - Model 1200
Next, I took apart the Z-axis carriage and router lift tower; and cleaned and
greased everything as appropriate.
I took several pictures of the unit beforehand so I'd be able to reassemble
things in the right
Any dry lube is ok its just dyna is the best
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Ray Leaman
Sent: Friday, 27 November 2020 10:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Disassembly/Reassembly of Z-axis Carriage Assembly - Model 1200
cy-ornamental-mills@googlegroups.com> *On Behalf Of *Ray Leaman
> *Sent:* Thursday, 26 November 2020 7:14 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Disassembly/Reassembly of Z-axis Carriage Assembly - Model 1200
>
>
>
> Next, I took apart the Z-axis carriage
-mills@googlegroups.com
Subject: Disassembly/Reassembly of Z-axis Carriage Assembly - Model 1200
Next, I took apart the Z-axis carriage and router lift tower; and cleaned and
greased everything as appropriate.
I took several pictures of the unit beforehand so I'd be able to reassemble
Yeah, those things cost about $60!
On Wed, Nov 25, 2020 at 11:36 PM Tim Ziegler wrote:
> cant beat the quick change chuck. The guy that had mine before me had
> purchased with it too.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
cant beat the quick change chuck. The guy that had mine before me had
purchased with it too.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Wed, Nov 25, 2020 at 2:14 PM Ray Leaman wrote:
> Next, I took
12 matches
Mail list logo