Re: cutting very fine pitches

r chain a figure eight. Where the chain meets in the middle, put >> a plastic wear plate as a guide. Now you will be left hand thread >> Mike >> OK >> On 11/8/2022 10:20 PM, bulke...@mmnet.com.au wrote: >> >> The only problem is you can only cut right hand pi

Re: cutting very fine pitches

> > On 11/8/2022 10:20 PM, bulke...@mmnet.com.au wrote: > > The only problem is you can only cut right hand pitches . > > > > I do have another much more complicated method for cutting very fine > > Pitches using the normal gears with some extra gear sets > > But

Re: cutting very fine pitches

lem is you can only cut right hand pitches . > > > > I do have another much more complicated method for cutting very fine > > Pitches using the normal gears with some extra gear sets > > But the sprocket way is the easiest > > > > Bill > > > > *From:*

Re: cutting very fine pitches

t right hand pitches . > > > > I do have another much more complicated method for cutting very fine > > Pitches using the normal gears with some extra gear sets > > But the sprocket way is the easiest > > > > Bill > > > > *From:* legacy-orname

RE: cutting very fine pitches

The only problem is you can only cut right hand pitches . I do have another much more complicated method for cutting very fine Pitches using the normal gears with some extra gear sets But the sprocket way is the easiest Bill From: legacy-ornamental-mills@googlegroups.com On Behalf

Re: cutting very fine pitches

-630-2243 cell On Tue, Nov 8, 2022 at 9:55 PM wrote: > Cutting very fine pitches on the legacy this is one way I used > > > > Bill > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills&q

Re: milling fine pitches with sprockets and chain

.au Sent: Apr 22, 2021 9:33 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: milling fine pitches with sprockets and chain here is a couple from last year or the year before I can’t remember they are 2 ft long you will have to zoom them in to see properly, the pics don’t really

Re: milling fine pitches with sprockets and chain

the "Down Under" marsupials you have > roaming around on your property?!?! > Excellent work on both! > Mac > -- > > -Original Message- > From: bulke...@mmnet.com.au > Sent: Apr 22, 2021 9:33 AM > To: legacy-ornamental-mills

Re: milling fine pitches with sprockets and chain

ups.com> *On Behalf Of *Tim Ziegler > *Sent:* Thursday, 22 April 2021 10:55 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: milling fine pitches with sprockets and chain > > > > I'd love to see your scrolling work too. Yea depends on the day how fast I >

Re: milling fine pitches with sprockets and chain

. > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Thursday, 22 April 2021 10:52 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:*

RE: milling fine pitches with sprockets and chain

-mills@googlegroups.com Subject: RE: milling fine pitches with sprockets and chain Bill, VERY Nice! Thanks for sharing. Is that second one an image of one of the "Down Under" marsupials you have roaming around on your property?!?! Excellent work on both! Mac _ -Origin

RE: milling fine pitches with sprockets and chain

groups.com Subject: RE: milling fine pitches with sprockets and chain here is a couple from last year or the year before I can’t remember they are 2 ft long you will have to zoom them in to see properly, the pics don’t really do them justice and I’m no expert scroller either BillFrom: legacy-orname

RE: milling fine pitches with sprockets and chain

like a bit of a polish so I don’t do that. Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Thursday, 22 April 2021 10:52 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: milling fine pitches with sprockets and chain Well I sure hope all

Re: milling fine pitches with sprockets and chain

legacy-ornamental-mills@googlegroups.com > *Subject:* Re: milling fine pitches with sprockets and chain > > > > lol I wondered why you were so quiet. Didn't know you hibernated in the > cold lol > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler Wo

RE: milling fine pitches with sprockets and chain

When I come across it I do Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Thursday, 22 April 2021 9:00 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: milling fine pitches with sprockets and chain yea lot of stuff like this you guys

Re: milling fine pitches with sprockets and chain

post either sorry > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Thursday, 22 April 2021 8:56 PM > *To:* legacy-ornamental-mills@googlegroups.com &

RE: milling fine pitches with sprockets and chain

ls@googlegroups.com> Subject: Re: milling fine pitches with sprockets and chain I remember that. Even today that idea is impressive. When there is a will, there is always a way to get the job done. ;-) Perhaps I will try it, for my self? Thanks for re-posting this Bill C.A.G.

Re: milling fine pitches with sprockets and chain

*From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Thursday, 22 April 2021 8:53 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: milling fine pitches with sprockets and chain > > &g

RE: milling fine pitches with sprockets and chain

From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Thursday, 22 April 2021 8:56 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: milling fine pitches with sprockets and chain I have a dumb question but did you make some of your shafts longer to accomidate

Re: milling fine pitches with sprockets and chain

bones. > > > > Bill > > > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Thursday, 22 April 2021 4:01 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: milling fine pitches with sprocket

Re: milling fine pitches with sprockets and chain

gt; Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of * > bulke...@mmnet.com.au > *Sent:* Thursday, 22 April 2021 1:52 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* milling fine

Re: milling fine pitches with sprockets and chain

ills@googlegroups.com> *On Behalf Of * > bulke...@mmnet.com.au > *Sent:* Thursday, 22 April 2021 1:52 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* milling fine pitches with sprockets and chain > > > > Looking through my legacy stuff on my computer and I found t

Re: milling fine pitches with sprockets and chain

Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Wed, Apr 21, 2021 at 10:53 PM wrote: > Looking through my legacy stuff on my computer and I found this page of > mine on using a chain and sprockets on the mill to cut fine pitches or > threads if you use the 60 degree ro

RE: milling fine pitches with sprockets and chain

for my bones. Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Thursday, 22 April 2021 4:01 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: milling fine pitches with sprockets and chain I remember that. Even today that idea is impressive. When

Re: milling fine pitches with sprockets and chain

I had the word (gear) instead of (sprocket) written in the attachment fixed now   Bill   From: legacy-ornamental-mills@googlegroups.com On Behalf Of bulke...@mmnet.com.au Sent: Thursday, 22 April 2021 1:52 PM To: legacy-ornamental-mills@googlegroups.com Subject: milling fine pitches

Re: turning fine pitches on the legacy

Wow I'm impressed. Very good job. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Sep 15, 2019 at 4:52 PM wrote: > I made myself some gears for my legacy for cutting very fine pitche

Re: turning fine pitches on the legacy

Again. AWESOME job Bill. I like this one a LOT. C.A.G. On Sunday, September 15, 2019, 05:52:53 PM EDT, wrote: I made myself some gears for my legacy for cutting very fine pitches. So I thought I would share     Bill | | Virus-free. www.avast.com | -- You received

Re: Fine Pitches

piece on the inside of the rail, a l shaped underneath to > join the rails temporarily. Pretty close to how Roger did his. It saves > welding and can be undone. I’ll try to find the messages in the next few > days. > > > > > > > > *From: *Tim Ziegler > *Sent: *Wednes

Re: Fine Pitches

ible. I think I did > post the bolted with metal plate to the group it would be somewhere in the > archives, the trouble with that of course if finding it. > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com

RE: Fine Pitches

That’s pretty much what mine was like before I welded it Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Thursday, 5 September 2019 2:09 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Fine Pitches Hello Everyone. here is a link to what I did years ago

Re: Fine Pitches

to join the rails temporarily.  Pretty close to how Roger did his.  It saves welding and can be undone.  I’ll try to find the messages in the next few days.       From: Tim Ziegler Sent: Wednesday, September 4, 2019 8:11 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Fine Pitches

RE: Fine Pitches

To: legacy-ornamental-mills@googlegroups.com Subject: Re: Fine Pitches Thanks Bill.  Lots of guys in this area that specialize in welding so will have to look into it.  Other wise just getting a couple short rails I would couple together from the bottom some how too. Then they can be removed.  Kind

Re: Fine Pitches

ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Krause > *Sent:* Thursday, 5 September 2019 7:16 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Fine Pitches > > > > One of the more fun projects was combining t

Re: Fine Pitches

gacy makes. We need >>> to support the mothership for as long as they help support us. >>> >>> I would love to see all the new people show what they are doing than >>> seeing new messages from the core guys like me, Mike, curt, and bill etc. >>> >>>

RE: Fine Pitches

be somewhere in the archives, the trouble with that of course if finding it. Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Krause Sent: Thursday, 5 September 2019 7:16 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Fine Pitches One of the more fun

Re: Fine Pitches

>> seeing new messages from the core guys like me, Mike, curt, and bill >etc. >> >> Thanks for the questions and comments. >> >> Tim >> >> >> >> Sent from Samsung tablet >> >> Original message >> From: Tim Ziegler

Re: Fine Pitches

ey are doing than > seeing new messages from the core guys like me, Mike, curt, and bill etc. > > Thanks for the questions and comments. > > Tim > > > > Sent from Samsung tablet > > Original message > From: Tim Ziegler > Date: 9/4/19 3:48

Re: Fine Pitches

@googlegroups.com Subject: Re: Fine Pitches Tim where you down loading a pic or attaching the link to it?I've heard your quite an innovator. The others have spoken highly of you.I think for you guys that have been at this a while could post a pic or so a weekof different innovations you've done

Re: Fine Pitches

I don't know if I ever showed what I did with #25 chain. I made my own sprockets and keyed them to the drive spindle and lead screw. It worked great. Lots of wisdom in the old post for sure. We were all younger and more ambitious! Tim -- You received this message because you are subscribed

Re: Fine Pitches

Very quick search brought up https://www.bearingboys.co.uk for the UK and https://www.robotshop.com/en/gears-belts-pulleys-tracks-sprockets-chains.html for US -- You received this message because you are subscribed to the Google

fine pitches on the legacy

This one is for ray but some of you other guys might like this as well so I posted it here it from the groups archives

Re: Fine Pitches

. There will be more to come on this latter. Again Awesome work Bill. Thank you. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Sat, 03 Dec 2011 05:09:49 -0500 (EST) Subject: Re: Fine Pitches sorry curt I thought I