RE: Want to put a motor my 1200

identified the 2X multiplier set correctly. Sent from Mail for Windows 10 From: wkhill99 Sent: Friday, July 17, 2020 2:18 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 I like it!  The setup doesn't look too terribly complicated.  I'm guessing the c

Re: Want to put a motor my 1200

I like it! The setup doesn't look too terribly complicated. I'm guessing the complicated part comes when setting up Mach 3 for the travel, etc. I'll definitely be hanging on to this email chain. Just echoing what other people have already said... any additional details you want to throw in will

Re: Want to put a motor my 1200

I like the timing pulley setup, what parts did you use? On Saturday, June 13, 2020 at 10:48:41 AM UTC-4, Curt George wrote: > > Hello Everyone > Denson, I have taken your posting and thought it should stand in its own > as a new topic. > > > From: > > 'Denson Ingram' via Legacy Ornamental Mill

Re: Want to put a motor my 1200

Hello.Very nice work.  One request, How about a over view of the hole unit?  The up close is very nice, but I am getting lost in the details. ;-)  And I agree with Bill, I video would be nice. Thank you. C.A.G. On Thursday, July 16, 2020, 08:36:22 PM EDT, Chainlink wrote: Ok, I finall

Re: Want to put a motor my 1200

Dustin I must say I am very impressed. Nice clean work and best of all it looks like it works extremely well too. I am looking to modify the Z access for up and down as well. Thanks again for sharing. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 5633

Re: Want to put a motor my 1200

Dustin I must say I am very impressed. Nice clean work and best of all it looks like it works extremely well too. I am looking to modify the Z access for up and down as well. Thanks again for sharing. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330

RE: Want to put a motor my 1200

Looks good any possibility of seeing a video of it all working? Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Chainlink Sent: Friday, 17 July 2020 10:09 AM To: Legacy Ornamental Mills Subject: Re: Want to put a motor my 1200 Ok, I finally got around to posting

Re: Want to put a motor my 1200

That is a really nice job on the LOM. impressive! On Thu, Jul 16, 2020 at 7:09 PM Chainlink wrote: > Ok, I finally got around to posting. If anyone has questions, please ask. > The reason I did this exactly the way I did was because I wanted to be able > to reverse it all and go back to a regula

Re: Want to put a motor my 1200

If any of you guys were wanting the router bit templates I have two sets left. They are 81/2”x11”x3/32” clear acrylic. The match the originals with the bit numbers etched by each profile. The turned out good. Ray bought a set at my cost to have the duplicated. Contact me at densoning...@charter.

Re: Want to put a motor my 1200

Dustin, That was quite a summary. Thank you! I'm definitely interested in pursuing the stepper motor path. I just need to get a "kitchen-pass" from the wife!!! -Wes On Sun, Jun 21, 2020 at 7:18 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: >

Re: Want to put a motor my 1200

This is useful information. More on how this woud be done would be helpful to some of us wanting to update older mills. Thanks On Sun, Jun 21, 2020 at 8:18 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Thank you. > C.A.G. > > On Sunday, June 2

Re: Want to put a motor my 1200

Thank you.C.A.G. On Sunday, June 21, 2020, 05:08:38 PM EDT, Chainlink wrote: I don't usually have problems turning 2 and 3 inch square stock to round except when I hit a knot. That's when I lose steps; it's catastrophic if I lose steps when threading. I bought a 4 axis kit some years

Re: Want to put a motor my 1200

I don't usually have problems turning 2 and 3 inch square stock to round except when I hit a knot. That's when I lose steps; it's catastrophic if I lose steps when threading. I bought a 4 axis kit some years ago for a homemade CNC machine. I repurposed that kit on the Legacy. I bought a kit fro

Re: Want to put a motor my 1200

Yes, I'll take some photos next time I'm at the shop. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups

RE: Want to put a motor my 1200

: legacy-ornamental-mills@googlegroups.com On Behalf Of Arkady Paka Sent: Saturday, 20 June 2020 4:18 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Hellow Bill. Thanks for your answer. What reason to use core box bit instead of surface planning bit

Re: Want to put a motor my 1200

; > > > -Original Message- > From: legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> On Behalf Of JOHNNY L TYLER > Sent: Saturday, 20 June 2020 11:25 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put a m

RE: Want to put a motor my 1200

@googlegroups.com Subject: Re: Want to put a motor my 1200 Tim, I printed off your actual sized picture of the mounting plate and compared it to my 1200. The 1200 came pre-drilled from Legacy to receive the mounting plate for a 4Z131B. What I discovered from your drawing is that the shaft diameter is

RE: Want to put a motor my 1200

After you get all set up and going please send us a video of it all working. Bill From: 'Denson Ingram' via Legacy Ornamental Mills Sent: Saturday, 20 June 2020 11:23 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Great Thank you

Re: Want to put a motor my 1200

roups.com > On Behalf Of JOHNNY L TYLER > Sent: Friday, June 19, 2020 6:25 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put a motor my 1200 > > Tim, I printed off your actual sized picture of the mounting plate and > compared it to my 1200. The 1

RE: Want to put a motor my 1200

I don’t have any specs but limit switches are all over ebay Bill From: 'Denson Ingram' via Legacy Ornamental Mills Sent: Saturday, 20 June 2020 10:45 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Does anyone have the specs on th

RE: Want to put a motor my 1200

s.com on behalf of artmarb...@comcast.net Sent: Thursday, June 18, 2020 1:47 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Want to put a motor my 1200 Hi Arkady, Print out the attached pdf file using the “Print Actual Size” setting and see if it will work for you I made this fi

Re: Want to put a motor my 1200

on behalf of artmarb...@comcast.net Sent: Thursday, June 18, 2020 1:47 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Want to put a motor my 1200 Hi Arkady, Print out the attached pdf file using the “Print Actual Size” setting and see if it will work for you I made this file by

Re: Want to put a motor my 1200

caea:g:lwAAAOSwBhJe1zwG > > Not an endorsement. > > From: 'Denson Ingram' via Legacy Ornamental Mills > > Sent: Friday, June 19, 2020 6:08 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put a motor my 1200 > > Thank you. > D

RE: Want to put a motor my 1200

20 6:08 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Thank you. Denson Sent from Denson's iPhone On Jun 19, 2020, at 8:04 PM, artmarb...@comcast.net <mailto:artmarb...@comcast.net> wrote:  Most industrial style limit swit

Re: Want to put a motor my 1200

a Legacy Ornamental Mills > > Sent: Friday, June 19, 2020 5:45 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put a motor my 1200 > > Does anyone have the specs on the original legacy lead screw limit switches > or know where I can find two

RE: Want to put a motor my 1200

is a good source, other wise they are very expensive via standard industrial supply houses. From: 'Denson Ingram' via Legacy Ornamental Mills Sent: Friday, June 19, 2020 5:45 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Does anyon

Re: Want to put a motor my 1200

ering back in the day to buy from > legacy was almost $1000 > > Bill > > From: 'Denson Ingram' via Legacy Ornamental Mills > > Sent: Saturday, 20 June 2020 8:31 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put a motor my 1200

RE: Want to put a motor my 1200

motor but to get that is lots of work a second motor is easier but all this is just my opinion. Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Arkady Paka Sent: Saturday, 20 June 2020 9:38 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor

RE: Want to put a motor my 1200

-ornamental-mills@googlegroups.com On Behalf Of wkhill99 . Sent: Saturday, 20 June 2020 5:57 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Bill, A 387 oz nema-23 has 24lbs/in of torque. What are your thoughts on how strong it needs to be? This

RE: Want to put a motor my 1200

I think that is quite a good deal considering back in the day to buy from legacy was almost $1000 Bill From: 'Denson Ingram' via Legacy Ornamental Mills Sent: Saturday, 20 June 2020 8:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 120

Re: Want to put a motor my 1200

Hello. Question about spindel motor. Is it any advantage in results using spindel motor compared drive motor with 0.25 gear set as Legacy recommend? Arkady from Ukraine. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscrib

Re: Want to put a motor my 1200

>> >> Bill >> >> >> >> From: legacy-ornamental-mills@googlegroups.com >> On Behalf Of wkhill99 . >> Sent: Friday, 19 June 2020 2:05 PM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Want to put a motor my 1200

Re: Want to put a motor my 1200

l99 . > *Sent:* Friday, 19 June 2020 2:05 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Want to put a motor my 1200 > > > > Hey Bill, > > > > Steppers are variable speed and can have pretty high torque at low > speeds. Just needs to be si

RE: Want to put a motor my 1200

ilto:legacy-ornamental-mills@googlegroups.com> Subject: Re: Want to put a motor my 1200 Thanks for the clarification, John. I very much appreciate the follow-up! John Tyler From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-orname

Re: Want to put a motor my 1200

could you show more of the stepper motor on the Z access? I think that would be one of the things most of us would agree on would be the most beneficial to get up and out of the cut to prevent the burning or little snip a lot of us get? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialt

Re: Want to put a motor my 1200

Wes, I did a conversion to CNC on a legacy 1200 with steppers. I have nema23 387oz. steppers and a 6:1 gear reduction on the Z and rotary axis, and a straight coupling on the X and Y. The setup is adequate on X,Y and Z, but the rotary axis needs a lot more torque. I haven't looked into what the

Re: Want to put a motor my 1200

Thanks Curt and Tim. Arkady from Ukraine. пт, 19 июн. 2020 г., 07:25 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com>: > Thanks Tim. > > C.A.G. > > On Thursday, June 18, 2020, 05:01:23 PM EDT, > wrote: > > > Arkady, > > > > The model 1000 is completely differ

Re: Want to put a motor my 1200

Thanks Tim. C.A.G. On Thursday, June 18, 2020, 05:01:23 PM EDT, wrote: #yiv2607050154 #yiv2607050154 -- _filtered {} _filtered {}#yiv2607050154 #yiv2607050154 p.yiv2607050154MsoNormal, #yiv2607050154 li.yiv2607050154MsoNormal, #yiv2607050154 div.yiv2607050154MsoNormal {margin:0in;mar

Re: Want to put a motor my 1200

> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *wkhill99 . > *Sent:* Wednesday, 17 June 2020 1:12 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Want to put a motor my 1200 > > > > Has anyone considered using stepper motors / drivers with th

RE: Want to put a motor my 1200

gacy-ornamental-mills@googlegroups.com> Subject: Re: Want to put a motor my 1200 Thanks for the clarification, John. I very much appreciate the follow-up! John Tyler From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@google

RE: Want to put a motor my 1200

Yes I have seen them for 5 or $600 Bill From: 'Denson Ingram' via Legacy Ornamental Mills Sent: Friday, 19 June 2020 8:01 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 I was wondering that myself. Also found one of the Legacy/Grain

Re: Want to put a motor my 1200

amental-mills@googlegroups.com >> On Behalf Of JOHNNY L TYLER >> Sent: Wednesday, 17 June 2020 9:58 AM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Want to put a motor my 1200 >> >> Thanks for the clarification, John. I very much appreciate th

Re: Want to put a motor my 1200

s@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> On Behalf Of JOHNNY L TYLER > Sent: Wednesday, 17 June 2020 9:58 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put a motor my 1200 > > Thanks for the clarification, John. I very much

RE: Want to put a motor my 1200

:17 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Hello everybody. I have dayton 4Z131B 90 volt dc motor but can't find bracket blueprint to mount it to my LOM 900. Anybody can help? Maybe some pics? Arkady from Ukraine. -- You received

Re: Want to put a motor my 1200

Hello Curt. Please give me pics. чт, 18 июн. 2020 г., 16:36 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com>: > Hello Arkady > > On my 1000ex the end cap, on the Legacy has the bolt pattern cut into it. > The motor was to be a straight line coupling to the acm

Re: Want to put a motor my 1200

Hello Arkady On my 1000ex the end cap, on the Legacy has the bolt pattern cut into it. The motor was to be a straight line coupling to the acme screw and bolt into/on the end plate of the machine.If you like I can take a photo latter? But it was a simple hole pattern one large hole for the acme

Re: Want to put a motor my 1200

Hello everybody. I have dayton 4Z131B 90 volt dc motor but can't find bracket blueprint to mount it to my LOM 900. Anybody can help? Maybe some pics? Arkady from Ukraine. > > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubs

RE: Want to put a motor my 1200

looks like it would work your controller would need to be 130volts to suit the motor Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of MAX LATHAM Sent: Thursday, 18 June 2020 1:14 AM To: legacy-ornamental-mills@googlegroups.com Subject: Fw: Want to put a motor my 1200

RE: Want to put a motor my 1200

What is that controller? Looks like a 3 phase one Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of MAX LATHAM Sent: Thursday, 18 June 2020 1:17 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Pics too big to send all. So here&#

Re: Want to put a motor my 1200

-tenv-4z131/i/G2208717/#specifications From: legacy-ornamental-mills@googlegroups.com on behalf of bulke...@mmnet.com.au Sent: Tuesday, June 16, 2020 5:07 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Want to put a motor my 1200 Legacys

RE: Want to put a motor my 1200

Legacys exact motor was a dayton 4Z131B 90volt dc motor Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com On Behalf Of JOHNNY L TYLER Sent: Wednesday, 17 June 2020 9:58 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200

RE: Want to put a motor my 1200

Legacys motor was a dayton 4Z131B 90volt dc motor Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Wednesday, 17 June 2020 9:10 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 As someone mentioned a few posts

RE: Want to put a motor my 1200

ere down under $1000 would set me up but that’s too much for me to pay. Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of John Hennen Sent: Wednesday, 17 June 2020 8:33 AM To: Legacy-Ornamental-Mills@googlegroups.com Subject: Re: Want to put a motor my 1200 G

Re: Want to put a motor my 1200

: Re: Want to put a motor my 1200 Grainge stopped making the speed control in 2005. The DC motor we used ended in 2008. I recommended a Dzc motor with a 5/8 shaft. But you may have forgotten that. The speed control you will need to fit the motor. On Tue, Jun 16, 2020, 4:18 PM JOHNNY L TYLER

Re: Want to put a motor my 1200

; To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put a motor my 1200 > > Thanks Joe I’ll check out Grainger > > Sent from Denson's iPhone > > > On Jun 13, 2020, at 3:18 PM, 'joe biunno' via Legacy Ornamental Mills < > legacy-ornamental

Re: Want to put a motor my 1200

t; > John Tyler > > > From: 'Denson Ingram' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > Sent: Saturday, June 13, 2020 1:49 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Want to put

Re: Want to put a motor my 1200

Tyler From: 'Denson Ingram' via Legacy Ornamental Mills Sent: Saturday, June 13, 2020 1:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Want to put a motor my 1200 Thanks Joe I’ll check out Grainger Sent from Denson's iPho

RE: Want to put a motor my 1200

Don’t think buy you can never have enough legacy. Did you find a way of shipping to Australia? Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Richard Ellis Sent: Sunday, 14 June 2020 4:32 PM To: Legacy Ornamental Mills Subject: Re: Want to put a motor my 1200 Hi

Re: Want to put a motor my 1200

acy-orna...@googlegroups.com > > *Sent:* Sunday, 14 June 2020 1:17 AM > *To:* Legacy ornamental mills > > *Subject:* Re: Want to put a motor my 1200 > > > > Hello Again. This topic should stand on its own. > > > > I feel a motor drive is a must for

Re: Want to put a motor my 1200

Sent from Denson's iPhone > On Jun 13, 2020, at 3:18 PM, 'joe biunno' via Legacy Ornamental Mills > wrote: > > If I remember correctly, the same motor Legacy used can be gotten from WE > Grainger... the bracket you will have to make yourself... the limit switches > can probably also be go

Re: Want to put a motor my 1200

Thanks Joe I’ll check out Grainger Sent from Denson's iPhone > On Jun 13, 2020, at 3:18 PM, 'joe biunno' via Legacy Ornamental Mills > wrote: > > If I remember correctly, the same motor Legacy used can be gotten from WE > Grainger... the bracket you will have to make yourself... the limit sw

Re: Want to put a motor my 1200

If I remember correctly, the same motor Legacy used can be gotten from WE Grainger... the bracket you will have to make yourself... the limit switches can probably also be gotten from Grainger... and you can put together the speed control switch and override switch in a box, all should be availa

Re: Want to put a motor my 1200

motor supplier back in the day when Legacy was producing the 1200/2000. Again, thanks for the great group feedback! John From: 'Curt George' via Legacy Ornamental Mills Sent: Saturday, June 13, 2020 8:17 AM To: Legacy ornamental mills Subject: R

RE: Want to put a motor my 1200

ornamental mills Subject: Re: Want to put a motor my 1200 Hello Again. This topic should stand on its own. I feel a motor drive is a must for any Legacy owner. I originally did not by a motor drive for my machine, I felt it was to expensive and I did not need it. I was WONG on both accounts

Re: Want to put a motor my 1200

Thanks Curt Great info and pics Thank you Sent from Denson's iPhone > On Jun 13, 2020, at 10:17 AM, 'Curt George' via Legacy Ornamental Mills > wrote: > >  > Hello Again. This topic should stand on its own. > > I feel a motor drive is a must for any Legacy owner. > I originally did not by