ep up the good work.
>
> C.A.G.
>
> On Sunday, December 27, 2020, 06:12:29 PM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Hey Bill another Rosette. Working on trying to talk my wife into Rosettes
> at door way trim
>
> --
> You received this mess
I like it Tim!
Keep up the good work.
C.A.G.
On Sunday, December 27, 2020, 06:12:29 PM EST, Tim Ziegler
wrote:
Hey Bill another Rosette. Working on trying to talk my wife into Rosettes at
door way trim
--
You received this message because you are subscribed to the Google Groups
d off show
the motions of doing the pattern so what I did was the best I could do
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, 12 September 2020 1:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling rosettes
Drat!
(Most likely the copy writ
off show
the motions of doing the pattern so what I did was the best I could do
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, 12 September 2020 1:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling rosettes
Drat!
(Most likely the copy
in the world and its not here its America of all places
So I went with boring elevator music instead.
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Friday, 11 September 2020 2:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling rosettes
Howdy
2020 2:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling rosettes
Howdy Bill
Very Nice work!
So you figured out how to add in music. Nice trick, (I was hoping for Waltzing
Matilda though .) ;-p.
Keep up the good work, and thank you.
I will write more latter
: Re: milling rosettes
Great video! In the past I have made rosettes to go on stairway post. So I
used a 4" forstner bit to create a pocket and then made a round rosette as you
have done here. then all I had to do is glue it into the pocket and let people
think I carved it into the
@googlegroups.com
Subject: Re: milling rosettes
Great video! In the past I have made rosettes to go on stairway post. So I
used a 4" forstner bit to create a pocket and then made a round rosette as you
have done here. then all I had to do is glue it into the pocket and let people
think I c
-ornamental-mills@googlegroups.com
On Behalf Of M.W.Foscue
Sent: Friday, 11 September 2020 12:59 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling rosettes
Bill,
Thank you - Very much - for making (re-making?) the video.
Well done! The background music was much better than
Great video! In the past I have made rosettes to go on stairway post.
So I used a 4" forstner bit to create a pocket and then made a round
rosette as you have done here. then all I had to do is glue it into the
pocket and let people think I carved it into the post.
Mike OK
On 9/10/2020
Subject: milling rosettes
well this was one hard video to do i could'nt even see what i was doing it was all by the mills settings. i would have liked better wood but i wanted a differant color from the posts i did,.its the best i could do. i did have a visit from my shops annual spring visitors
Very nice Dexter.
I like you turn table and Rosettes.
You should add one more small gear onto your turn table design, to make it
easer to get the clearance between your router carrage and the work peice. But
Your table and lock as KISS simple. (I like it, that's a A+ in my book!)
C.A.G
table and Rosettes.
You should add one more small gear onto your turn table design, to make it
easer to get the clearance between your router carrage and the work peice.
But Your table and lock as KISS simple. (I like it, that's a A+ in my book!)
C.A.G.
--
You received this message because
Rosettes
I was tasked with making a set of book cases for a friend and had the design
kinda worked out in my head of what I wanted to do, but could not find
something to top off some fluted trim that will be used to cover the joints
between the cabinet sections (4 sections with each 39 wide
Looks good
On Monday, January 12, 2015, Dexter Bland dexterbl...@gmail.com wrote:
Sorry, Missed attaching 2 of the photos.
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving
Rosettes
Sorry, Missed attaching 2 of the photos.
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr
16 matches
Mail list logo