I buy my double sided tape from Craft Supply. The web site is
www.woodturnerscatalog.com
Stan Shuford
s...@shuford.com
On Mon, Jun 6, 2016 at 5:48 AM, Bill Bulkeley <bulke...@mmnet.com.au> wrote:
> I’m reposting this with a new heading so any one in the future searching
> our arch
e group Phil.
Bill, I have to give the acetone a try as an accelerant. It makes a lot of
sense.
-Tim
- Original Message -
From: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, June 06, 2016 2:48 AM
Subject: double sided tape
I’m reposting this w
I’m reposting this with a new heading so any one in the future searching our
archives looking for info on double sided tape will hopefully be able to find
it easier . i hope it comes up as a new topic
Bill
https://www.youtube.com/watch?v=3uTsQ3dYRrk
I have not used the method
Gassen
Sent: Wednesday, 28 January 2015 1:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: double sided tape
I know this is old, but the best source I have found is Amazon. I use it to
bond Stainless to glass in all-glass storefront systems.
They are 45 degree and 90 degree
to
allow for timber movement this 3M VHB might be a good and quick
alternative..
But getting back to legacy the issue people seem to have with using
double sided tape is that it might not hold
That is why I was thinking this stuff might work quite well .removing it I
believe might be the only
this 3M VHB might be a good and quick alternative..
But getting back to legacy the issue people seem to have with using double
sided tape is that it might not hold
That is why I was thinking this stuff might work quite well .removing it I
believe might be the only trouble
But perhaps small
Subject: double sided tape
Anybody ever used 3M VHB tape for holding work on the mill I found it on the
net while surfing
And I was wondering how it would go to hold work for milling on the legacy like
the rotary table or on a mdf table
Any comments about this product
Bill
Anybody ever used 3M VHB tape for holding work on the mill I found it on the
net while surfing
And I was wondering how it would go to hold work for milling on the legacy like
the rotary table or on a mdf table
Any comments about this product
Bill
.
--
You received this
I USE GORRILLA GLUE DOUBLE SIDED TAPE, IT WORKS WELL AND CLEANS UP EASY
WITH A LITTLE MINERAL SPIRITS
On Fri, Feb 7, 2014 at 8:08 PM, marlinhartman marlin.hart...@comcast.netwrote:
The link www.woodturnerscatalog.com does work
Permmacel tape part # 1049820001
Marlin
--
You
Thanks James, That is a new one on me. I did not know that Gorrilla Glue made a
double sided tape. Question. The biggest problem that I run into with all the
DST that Ive used in the past is temp. none to the tapes did well when the
temp. was under 50 deg. (which my shop in most of the year
I'm going to try and find some double sided tape and try it on the legacy
What is every ones opinion on the best brand or sort I see legacy doesn't
recommend carpet tape. And something on line would be good ,any idea what
one legacy uses.
I could use a hot glue gun yes but I think tape would
Bill, Legacy recommends the tape from Craft Supplies USA
www.woodturnerscatalog .com
- Original Message -
From: Bill Bulkeley bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, February 7, 2014 6:42:46 PM
Subject: double sided tape
I’m going to try
Martin the link dose not work, But a number of company's sell double sided tape
for wood turning, Rockler, and WoodCraft as well as Peachtree and a lot of
others sell double sided tape for woodturners.
As for my self, I find that tape works well when temp. is above 50 deg. F.
below
] On Behalf Of curt george
Sent: Saturday, 8 February 2014 11:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: double sided tape
Martin the link dose not work, But a number of company's sell double sided tape
for wood turning, Rockler, and WoodCraft as well as Peachtree and a lot
The link www.woodturnerscatalog.com does work
Permmacel tape part # 1049820001
Marlin
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Curt, Bill, et al,Here
is a link directly
to the Double-sided Tape product listing at Woodturners' Catalog:http://www.woodturnerscatalog.com/p/5/-/18/85/-/5833/Permacel-Double-Sided-Tape?term=double%20sided%20tapeMac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sen
: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Sunday, April 03, 2011 8:09 PM
Subject: RE: double sided tape
Thank you so far more negative feedback than positive on the double sided tape
Which sort of confirmed my reluctance to try to use it again
But what a bout
-mills@googlegroups.com
Sent: Sunday, April 03, 2011 8:09 PM
Subject: RE: double sided tape
Thank you so far more negative feedback than positive on the double sided
tape
Which sort of confirmed my reluctance to try to use it again
But what a bout the hot glue how strong do you
all of the work on the legacy
Bill
- Original Message -
From: begatbrown darylmichaelsc...@gmail.com
To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, April 05, 2011 9:45 AM
Subject: Re: double sided tape
Bill,
I should have made clear that I
-ornamental-mills@googlegroups.com
Sent: Monday, April 04, 2011 5:27 PM
Subject: Re: double sided tape
another method Tim put me on to is glue with wood glue a scrap piece of
timber to the work and screw the scrap to the spoil board
then turn the waste piece off later good idea for a bowl or something
Hello Bill
For me Double sided tape is not practical. The tape will not stick well in
temperatures lower than 50 deg. F.
I've used a number of different types from 3 wide carpet tape. to 3/4 wide
3M double sided (Hang anything tape sold at every hardware store That I've
ever been in.)
When
Hello Bill,
Thus far I have used double-sided tape about a dozen times, not a
lot. I don't like using it. It's not cheap, and the times that I've
skimped on the tape, I've regretted the results. I now use hot glue
and long for a vacuum clamp.
Begat
On Apr 3, 8:30 am, curt george curtgeo
Thank you so far more negative feedback than positive on the double sided
tape
Which sort of confirmed my reluctance to try to use it again
But what a bout the hot glue how strong do you find that and how hard or
easy is it
To remove the work and also the glue from the work?
Bill
From
Bulkeley bulke...@mmnet.com.au
Sender: legacy-ornamental-mills@googlegroups.com
Date: Mon, 4 Apr 2011 10:09:57
To: legacy-ornamental-mills@googlegroups.com
Reply-To: legacy-ornamental-mills@googlegroups.com
Subject: RE: double sided tape
Thank you so far more negative feedback than positive
-ornamental-mills@googlegroups.com
Subject: RE: double sided tape
Thank you so far more negative feedback than positive on the double sided
tape
Which sort of confirmed my reluctance to try to use it again
But what a bout the hot glue how strong do you find that and how hard or
easy
25 matches
Mail list logo