Re: 6 start turning

Hi Tim. You use Klingspor sandpaper to make mops yourself or buy Klingspor mops? Arkady from Ukraine. пн, 30 нояб. 2020 г. в 13:45, Tim Ziegler : > Yea I use Kingspor for my sanding mops. I have a few. I like the hand > sanded effect better for staining. gets in to places the mop dont. > Kind

Re: 6 start turning

So how many pics actually come through? I never see my own posts or pics. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 1:45 AM M.W.Foscue wrote: > Tim, > Thanks - again. > Mac >

Re: My 1200 - Accessories: Template Follower

Thanks for sharing that Curt. I think I have the templates that are referred to on page 8. They are a bit rusty and heavy. I wasn't too sure what they were for. I doubt I will ever use them though. It's nice to know what they are.\ Thanks again, Tracy On Sun, Nov 29, 2020 at 8:30 PM 'Curt

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

If someone can tell the date of manufacture by looking at the machine that would be something. Anyone care to guess the year mine was made? Ray On Mon, Nov 30, 2020 at 6:46 AM Tim Ziegler wrote: > True on the manual but I thought with the new letter or those copies that > Curtis down loaded

RE: My 1200 - Accessories: Template Follower

I agree Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of M.W.Foscue Sent: Monday, 30 November 2020 6:11 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: My 1200 - Accessories: Template Follower Thanks Bill, Good idea. Not really necessary to be out of

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

Tim,I've seen several Manuals (even actually read one) and I have yet to see any reference to a "Date of manufacture"(DoM).Hell, most Mills I've either seen or seen photos of, don't even have a Model Number on them!! (Much less a Serial Number or DoM!Mac-Original Message- From: Tim Ziegler

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

True on the manual but I thought with the new letter or those copies that Curtis down loaded would possibly help tell when it was made? It seems many of you can identify them by looking at them about how new they are? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave.

RE: 6 start turning

2 I think it was Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 30 November 2020 10:43 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: 6 start turning So how many pics actually come through? I never see my own posts or pics.

Re: 6 start turning

Yea I use Kingspor for my sanding mops. I have a few. I like the hand sanded effect better for staining. gets in to places the mop dont. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at

Re: LOM play time

I'll see if I can get that far Mac thanks. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 1:44 AM M.W.Foscue wrote: > Tim, > Very nice! Send more pics once you sand it and apply

Re: 6 start turning

I need to try the down size process you guys all explained. Thanks Bill Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 6:16 AM wrote: > 2 I think it was > > > > Bill > > > > *From:*

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

hey to Mac, Ray and the rest in Legacy land... haven't posted to the group because not much to post as far as what I might be doing with my machine and dealing with complications on the general business end of what we do... but, if anyone wants to see photos of my modified Legacy, they can

Sources for the Template Follower Styluses

Did anyone have any sources where we might get a suitable replacement for the styluses we all lost or never had to begin with? Ray -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving

RE: What is this part

Holy crap that’s one of tim K s quick change gears keep that you should have it in your mill and be using it Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, 1 December 2020 6:07 AM To: legacy-ornamental-mills@googlegroups.com Subject: What is

RE: Sources for the Template Follower Styluses

I needed a smaller one for some gears. I just turned down a piece of rod. Drilled a hole in a piece of aluminum and turns a knob shape on it. The aluminum part needs to be the same for all stylus sizes and just change the bore and rod diameters. If that helps any? From:

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

I think you are right Bill. If I remember correctly, Legacy only did the CNC upgrades for about a year. According to this page: https://ornamentalmills.com/history/index.html, the CNC upgrades were discontinued in 2011. Tracy On Mon, Nov 30, 2020 at 1:05 PM wrote: > I cant tell you a date but

Re: What is this part

I've not run across this one Tim. What machine did it come off? Ray On Mon, Nov 30, 2020 at 2:07 PM Tim Ziegler wrote: > Ok guru's, > > I have this part that I got with my 1200 LOM. > I was told from Legacy I may as well get rid of it. > As it belonged to some setup I did have. > Does anyone

Re: What is this part

Are you saying it is part of your 1200 or that it goes with another setup you own? Ray On Mon, Nov 30, 2020 at 2:07 PM Tim Ziegler wrote: > Ok guru's, > > I have this part that I got with my 1200 LOM. > I was told from Legacy I may as well get rid of it. > As it belonged to some setup I did

RE: What is this part

You wont come across its very very rear only a few were made by tim k here is a link from the archives on it https://groups.google.com/g/legacy-ornamental-mills/c/LHkNujx8wkc/m/eewTSJa8wNoJ if you ever sell it I want it tim Bill From: legacy-ornamental-mills@googlegroups.com On

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

On Mon, Nov 30, 2020 at 2:29 PM Tracy Smith wrote: > I think you are right Bill. If I remember correctly, Legacy only did the > CNC upgrades for about a year. According to this page: > https://ornamentalmills.com/history/index.html, the CNC upgrades were > discontinued in 2011. > > Tracy > > On

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

I thought the 1200 was an earlier machine than 2004 -2012. I'm liking my purchase more and more. Hadn't seen this history but have seen others. Could never understand why they always jumped from the 1000 (ex;exl;etc) to the 1500ex and didn't explain why. Also it says the 1200 is similar to the

Re: Sources for the Template Follower Styluses

I can see the logic of it. My problem is not being able to turn a steel rod down. The aluminum I could probably do on my wood lathe. So yes, it does help Bob. Thanks. Ray On Mon, Nov 30, 2020 at 3:27 PM Bob Mark wrote: > I needed a smaller one for some gears. I just turned down a piece of

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

Joe,Great hearing from you.  Was getting concerned - since you live smack in the middle of  "Virus Land". Hang in there - your business will pick back up.Thanks for explaining the background info on your "King Kong" Mill!  I'm sure a lot of the new folks have no idea about its existence.Can't let

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

Curtain Pole Rods?!? I'd not think of that on such a mill. The length makes sense. The customer is always right. They must be commercial enterprises to need poles that long. I've added your facebook site to my desktop. While I have seen some of the pics before I'm much interested in your

Sadly, Selling my Woodchuck

Dear LOM Members, I've decided to sell my Woodchuck. It wasn't an easy decision. It just has to be done. BTW, if anyone wants the giant fan in some of the pictures, let me know. If you want the Woodchuck, make me an offer (I'll probably take the first offer from anyone that will come pick it up

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

Hey Joe, Great to hear from you. Yes I will check out the FaceBook posts you made. I have a part I am going to post for someone to identify here next too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On

Re: My 1200 - Accessories: Template Follower

You never know Tracy, some time you may have to repair an old piece and that may replicate exactly what you want. At least thats a good excuse to have them . lol Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

if they can get close. And that would be some of the seasoned guys that are on the Forum regularly. Were you able to connect with Cindy yet Ray? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30,

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

Hey Mac, Joe< I can not get that link to work. Could you get it to open? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 11:18 AM M.W.Foscue wrote: > Joe, > Great hearing from you.

RE: My 1200 - Accessories: Template Follower

Great idea Bill.  I did not consider doing that.Thanks.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Nov 29, 2020 10:13 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: My 1200 - Accessories: Template Follower Ok here’s a thing when making the larger ones use a

Re: 6 start turning

Hey, Arkady from Ukraine I buy the premade. They have some pretty great products. I use to use only their sand paper too but after I started using so much I started buying from Westlund Distributing or HDL both whole sale suppliers here in Minnesota. Kind Regards, Timothy J. Ziegler Ziegler

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

let me know Ray if FaceBook let you on or not. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 11:42 AM Ray Leaman wrote: > Curtain Pole Rods?!? I'd not think of that on such a mill.

Re: Sadly, Selling my Woodchuck

Our prayers are with you Brother Rick. We as well as others will help you find a new home for your WoodChuck. They are quite the machine. I have one too and tapped on Mike Pung for parts as well as knowledge. Rick you stay in touch with the group we are all here for you for support, prayers and

Re: My 1200 - Accessories: Template Follower

Hey Mac, Whats your email address I have some info for you? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 11:41 AM M.W.Foscue wrote: > Great idea Bill. I did not consider doing

Re: What is this part

Tim,Need a couple more photos - of the edge/sides.  Maybe even disassemble it so we can see more of it.My "guess" is it may have been a version of the "reversing gear" ?  To change direction of rotation of Acme screw from clock- to counter clock-wise.Let's see what others have to

RE: My 1200 - Accessories: Horizontal and Vertical Bench Vises

I cant tell you a date but the ball bearing headstock, the cnc upgrade and the adjustable vertical vice I would say its one of the later models not long before legacy stopped making them and turned to totally making cnc that’s just my opinion. Tim K or English roger would be the men who would

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

Thanks Bill. Maybe they will chime in with their thoughts. Ray On Mon, Nov 30, 2020 at 3:05 PM wrote: > I cant tell you a date but the ball bearing headstock, the cnc upgrade and > the adjustable vertical vice I would say its one of the later models not > long before legacy stopped making

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

Not yet. I'm still trying to get more familiar with my mill. Need to have someitems in mind before calling her. Ray On Mon, Nov 30, 2020 at 1:34 PM Tim Ziegler wrote: > if they can get close. And that would be some of the seasoned guys that > are on the Forum regularly. > Were you able to

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

Yes. Got right in. On Mon, Nov 30, 2020 at 1:58 PM Tim Ziegler wrote: > let me know Ray if FaceBook let you on or not. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Nov 30,

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

So you're thinking mid - late 90'S maybe? Ray On Mon, Nov 30, 2020 at 3:05 PM wrote: > I cant tell you a date but the ball bearing headstock, the cnc upgrade and > the adjustable vertical vice I would say its one of the later models not > long before legacy stopped making them and turned to

Re: More Closeups of my Vertical Bench Vise

very good Sir Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 1:55 PM Ray Leaman wrote: > 3 more. > > Ray > > -- > You received this message because you are subscribed to the Google

Re: Close ups of My Adjustable Vertical Bench Vise

I'm impressed thanks again. Lots of angles just what we need. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 1:56 PM Ray Leaman wrote: > Last 3. > > Ray > > -- > You received this

Re: Sources for the Template Follower Styluses

That sounds pretty practical. I'm sure that would help a few out. Can you post a couple pix of your work Bob? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 2:27 PM Bob Mark wrote:

Re: Close ups of My Vertical Bench Vise

yup Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 3:53 PM Ray Leaman wrote: > Send pics when you have it done. > > On Mon, Nov 30, 2020 at 4:32 PM Tim Ziegler wrote: > >> I'll be

Re: More Closeups of my Vertical Bench Vise

:) Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 3:54 PM Ray Leaman wrote: > Anything to help. > > On Mon, Nov 30, 2020 at 4:33 PM Tim Ziegler wrote: > >> very good Sir >> Kind

Re: What is this part

yep for sure. Chatted with him a few weeks ago Earlier on i found a manual he'd been looking for for years that I shared with him. I don't know him to well though. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

Joe, Been going thru your facebook page for the past couple of hours. Your shop (or shops if you will) is/are amazing. Spent most of the time perusing your legacy ornamental mill posts and comments. As others here have, that mill (actually two mills) of yours is as amazing as billed. I see

Re: What is this part

Yea I told them i'd never throw anything away. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 2:23 PM wrote: > Holy crap that’s one of tim K s quick change gears keep that you

Re: Sources for the Template Follower Styluses

I have a brother that can make anything you could possibly want? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 2:24 PM Ray Leaman wrote: > Did anyone have any sources where we

Re: Close ups of My Adjustable Vertical Bench Vise

Well they looked pretty good. I do a lot of drawing for my business too. most like you just did on graph paper. I tried AutoCad, but and also Sketchup but now I have Corel Draw for our Laser and thats a lot to learn too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171

Re: Sources for the Template Follower Styluses

Ray I am not sure.. If someone chimes in to what we should have I can check with him and have him price some. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:01 PM Ray Leaman wrote:

Re: What is this part

cool Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:05 PM wrote: > That is defiantly the question as far as I know only about 6 to 10 of them > were made it was extremely difficult

Re: Motor Driven Rotary Table - Couplings

these work great I did some as a test and far better then splitting a glue joint in my book. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:51 PM Ray Leaman wrote: > Thanks Ken I

Re: Sources for the Template Follower Styluses

Ok I put in a request for pricing from him stay tuned. ok Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 5:46 PM wrote: > Doesn’t really matter witch ever you like aluminum would be

Re: What is this part

yes sir. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 5:41 PM wrote: > Was that a woodchuck manual ? > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < >

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

I was understanding that the "standard" Legacy CNC upgrade package had servo motors that were connected directly to the Acme lead screws on the X,Y and Z axis and the headstock... the "performance" package was a rack and pinion setup that basically replaced the acme screws on the X and Y axis,

Re: What is this part

Where does it go? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 2:23 PM wrote: > Holy crap that’s one of tim K s quick change gears keep that you should > have it in your mill and

Re: What is this part

WOW Bill thanks so much for sharing that. I am now excited as a kitten with a yarn ball. Or a grown man with a LOM and a new part lol. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at

Re: What is this part

oh now this may be a whole other topic. tell me more is that posted too? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:08 PM wrote: > That piece on his duplex gear is the base of

Re: Sources for the Template Follower Styluses

Sounds good will do. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:05 PM Ray Leaman wrote: > I'll leave it in your hands. > > On Mon, Nov 30, 2020 at 5:03 PM Tim Ziegler wrote:

RE: Sources for the Template Follower Styluses

Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, 1 December 2020 9:03 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Sources for the Template Follower Styluses Ray I am not sure.. If someone chimes in to what we should have I

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

Ray this came from the LOM legend and guru himself. Tim Krause Sorry Tim Had to spill the beans. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 9:15 PM Ray Leaman wrote: > Thanks. >

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

I'm currently having all kinds of FaceBook problems on computer but can get in on my phone. So something must be blocked h Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 1:58 PM

Re: Close ups of My Adjustable Vertical Bench Vise

Just what is it that you do? Lasers? On Mon, Nov 30, 2020 at 4:57 PM Tim Ziegler wrote: > Well they looked pretty good. I do a lot of drawing for my business too. > most like you just did on graph paper. > I tried AutoCad, but and also Sketchup but now I have Corel Draw > for our Laser

RE: What is this part

That is defiantly the question as far as I know only about 6 to 10 of them were made it was extremely difficult to replace mine after my fire took mine. You can see curts one on his mill working on his videos. Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler

Re: Sources for the Template Follower Styluses

I'll leave it in your hands. On Mon, Nov 30, 2020 at 5:03 PM Tim Ziegler wrote: > Ray I am not sure.. If someone chimes in to what we should have I can > check with him and have him price some. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. >

Re: Motor Driven Rotary Table - Couplings

Thanks Ken I first heard of putting paper between glue ups way back in my pattern making training in trade school. I have used that trick many times over the years. I want to try the pilaster dogs just to see how they work since they came with my new mill. If things don 't work out I'll fall

Re: Close ups of My Adjustable Vertical Bench Vise

yea it would be what ever Anderson Trucking would dispatch out. They are the ones I use and they set it up. Its possible they would be one of them. I will send this to my Rep later when I get in from the shop and let you know. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171

RE: What is this part

You guys really need to look more at the groups pages its there plain as day https://ornamentalmills.com/turningaround/ http://www.artscopes.com/legacyornamentalmill/tools/waveattachment/waveattachment.html Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of

RE: What is this part

Was that a woodchuck manual ? Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, 1 December 2020 10:37 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: What is this part yep for sure. Chatted with him a few weeks ago Earlier on i

RE: Sources for the Template Follower Styluses

Right Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Ray Leaman Sent: Tuesday, 1 December 2020 2:07 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Sources for the Template Follower Styluses Thanks Tim. I just got back on and saw the stylus posts. The

Re: More Closeups of my Vertical Bench Vise

yup for sure lol Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 8:49 PM Ray Leaman wrote: > Who's shining who on now? (lol) > > On Mon, Nov 30, 2020 at 6:29 PM Tim Ziegler wrote: >

Re: What is this part

Thats what I understand. I am waiting for Bill to respond to my questions and Mac was also looking at it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 2:37 PM Ray Leaman wrote: >

Re: Vertical Bench Vise Specs./Pics

Glad to do it. Good luck on your fabrication. Send pics. On Mon, Nov 30, 2020 at 4:31 PM Tim Ziegler wrote: > Awesome thanks so much Ray. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > >

Re: What is this part

Yup exactly what it is. I do not have the extra U bracket but assuming I could change that with my other's. So this is a rare bird? I wonder how then guy I bought my mill from acquired it. I have to look him up now. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave.

Re: Close ups of My Adjustable Vertical Bench Vise

Give me a size and I can get an estimate for you Ray. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:14 PM Ray Leaman wrote: > Sorry! To North Carolina,,,zip 28394. > > On Mon,

Re: Close ups of My Adjustable Vertical Bench Vise

Would depend on the crate size and which motor Freight company is the closest to you. What ya thinking? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:13 PM Ray Leaman wrote: >

Re: Close ups of My Adjustable Vertical Bench Vise

I'm thinking 2'x2'x2' crate at 150 lbs. I could pick it up at a freight terminal anywhere in Raleigh or Fayetteville, NC. Don't have a preference here but Estes seems to deliver around here a bit. At least I see their trucks fairly often. They may be out of Fayetteville. On Mon, Nov 30, 2020

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

click on the link, then the actual link will appear, and then click on that... Joe B. (1) Legacy ornamental mill | Facebook (2) Finials Unlimited | Facebook On Monday, November 30,

Re: My 1200 - Accessories: Circle Cutting Center

I used mine to perfectly round templates to route with to make a drum. Sent from my iPhone > On Nov 29, 2020, at 11:58 AM, 'Curt George' via Legacy Ornamental Mills > wrote: > >  > Here are two more photos form the Grape Arbor project. > > C.A.G. > > On Sunday, November 29, 2020, 12:45:19

RE: Sources for the Template Follower Styluses

I would add a ¾ dia one too Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, 1 December 2020 10:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Sources for the Template Follower Styluses There we go I know someone would have

RE: My 1200 - Accessories: Horizontal and Vertical Bench Vises

This will help you. https://ornamentalmills.com/history/ From: legacy-ornamental-mills@googlegroups.com On Behalf Of Ray Leaman Sent: Monday, November 30, 2020 7:42 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises If

RE: Sources for the Template Follower Styluses

Most of the index pins legacy sold are steel dowel pins pressed into the aluminum holder. They were only used if you ordered the upgraded z axis. There was an updated follower designed that took those pins as well. Curt made a version for himself a long time ago. Maybe he has the photos

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

Sounds good Ray just thought I'd check. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 2:14 PM Ray Leaman wrote: > Not yet. I'm still trying to get more familiar with my mill.

Re: What is this part

Bill what is that extra piece Tim K has on his big gear then too? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 3:48 PM wrote: > >

Re: Close ups of My Vertical Bench Vise

Send pics when you have it done. On Mon, Nov 30, 2020 at 4:32 PM Tim Ziegler wrote: > I'll be sending over to my Brother to help me so I will let you know. > Thanks again Ray. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > >

Re: More Closeups of my Vertical Bench Vise

Anything to help. On Mon, Nov 30, 2020 at 4:33 PM Tim Ziegler wrote: > very good Sir > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Nov 30, 2020 at 1:55 PM Ray Leaman wrote: >

Re: Vertical Bench Vise Specs./Pics

will do Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 3:53 PM Ray Leaman wrote: > Glad to do it. Good luck on your fabrication. Send pics. > > On Mon, Nov 30, 2020 at 4:31 PM Tim

Re: Close ups of My Adjustable Vertical Bench Vise

Yeah. That comes from 8 years of engineering drawing although you couldn't tell it from the sketches. On Mon, Nov 30, 2020 at 4:33 PM Tim Ziegler wrote: > I'm impressed thanks again. Lots of angles just what we need. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty >

Re: What is this part

Bill do you remember a Norman Baker from Texas? Thats who's mill i own now. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 3:48 PM wrote: > >

Re: More Closeups of my Vertical Bench Vise

Something missing with your last post...like words?. On Mon, Nov 30, 2020 at 4:55 PM Tim Ziegler wrote: > :) > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Nov 30, 2020 at 3:54

Re: Close ups of My Adjustable Vertical Bench Vise

So basically I am a specialty shop. "If its wood I wood" Furniture, furniture repair, restoration, create build, mill work, laser Engrave, custom cabinets, Turnings, Mouldings, flag displays and display cases, gun stock checkering with laser of course. pretty much any and all. Kind Regards,

Re: More Closeups of my Vertical Bench Vise

Hey, glad you can smile. With everything else going on in the world...that's a good thing. On Mon, Nov 30, 2020 at 5:06 PM Tim Ziegler wrote: > was just a smile as you'd commented "anything to help" > I am pleased. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171

Re: 1/4 bit reducer

Wow! You DO have a creative mind. I like it! And here I always thought Lizard Lick was more in-land, like somewhere between Raleigh and Rocky Mount. I hope we never meet cause it would be a dumpster fire for those around us I betcha. On Mon, Nov 30, 2020 at 2:27 AM M.W.Foscue wrote: > Ray, >

Re: Face Book Marketplace posting of a 8ft. Legacy LOM

yea I tried everything. I have a business face book and have more problems then its worth some times. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020 at 4:46 PM 'joe biunno' via Legacy

Re: Sources for the Template Follower Styluses

Very nice stylus. Looks like the one I made, now to build some more. Christmas decorations are up time to hit the shop. Sent from Bob Mark's iPad > On Nov 30, 2020, at 1:39 PM, Tim Ziegler wrote: > >  > I have a brother that can make anything you could possibly want? > > Kind Regards, > >

Re: new here and selling

Hi Turin, Welcome to the group. You have come to the right place. What are asking of it and can you provide pix. Everyone is going to ask what you all have with it and want to see pix. Could you start down loading them and would you be willing to ship? Does it have a drive motor and speed control

Re: Sources for the Template Follower Styluses

yes sir. I used stylus tracing pins for 20 years on Weing Grinders both the 931 and 934. We matched the stylus to the grinding wheel we used and all went in the same hole Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop

Re: My 1200 - Accessories: Horizontal and Vertical Bench Vises

Hey Tim great to hear from you. I'd bet your ears had to be burning as your name has came up several times this last month. Hope all is ok? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Nov 30, 2020

RE: What is this part

https://groups.google.com/g/legacy-ornamental-mills/c/LHkNujx8wkc/m/eewTSJa8wNoJ look Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, 1 December 2020 8:42 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: What is this part It

  1   2   >