l-mills@googlegroups.com> *On Behalf Of *Ray Leaman
> *Sent:* Friday, 27 November 2020 8:42 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 Headstock and Tailstock Alignment
>
>
>
> Won't WD 40 do the job?
>
>
>
> On Wed, Nov 25, 2020 at 11:
Headstock and Tailstock Alignment
Won't WD 40 do the job?
On Wed, Nov 25, 2020 at 11:33 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:
Dyna Glide about $16.00 per can. you can get some other types but this leaves
no build up.
Kind Regards,
Timothy J. Ziegler
Ziegler Wo
gt; 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Nov 25, 2020 at 12:59 PM Ray Leaman wrote:
>
> After leveling and squaring up the upper rails and leg assembly I checked
> the alignment of the headstock/tailstock assembly. While close it was not
> exactly what I wante
aman wrote:
After leveling and squaring up the upper rails and leg assembly I checked the
alignment of the headstock/tailstock assembly. While close it was not exactly
what I wanted. By loosening a set of the cap screws on the tailstock side I was
able to get the alignment I wanted.
In the photo b
eveling and squaring up the upper rails and leg assembly I checked
> the alignment of the headstock/tailstock assembly. While close it was not
> exactly what I wanted. By loosening a set of the cap screws on the
> tailstock side I was able to get the alignment I wanted.
>
>
Thanks for the tips!
On May 21, 8:01 pm, Tim Krause artmarb...@comcast.net wrote:
Hi All,
I have not seen this topic covered before in my user manual, or in this
group. I came up with some simple tests and a procedure to align the
headstock and tailstock of the ornamental mill. Out of
Hi All,
I have not seen this topic covered before in my user manual, or in this group.
I came up with some simple tests and a procedure to align the headstock and
tailstock of the ornamental mill. Out of the four machines that I have
recently worked on, all of them have been out of
SLICK! Nice work Tim.
C.A.G.
- Original Message -
From: Tim Krause
To: Legacy-Ornamental-Mills@googlegroups.com
Sent: Friday, May 21, 2010 8:01 PM
Subject: Headstock and Tailstock Alignment
Hi All,
I have not seen this topic covered before in my user manual
Hi all im back boy I have missed heaps on here lots of reading to do nice one
Tim
Bill
- Original Message -
From: Tim Krause
To: Legacy-Ornamental-Mills@googlegroups.com
Sent: Saturday, May 22, 2010 10:01 AM
Subject: Headstock and Tailstock Alignment
Hi All,
I have
