Re: Looking for some new projects.

Hi Curt You already probably know about this guy but here goes. Projects Archives | Turning for Profit | Woodturning | Lathe | He has like a user group where he periodically sends out emails that have projects in them. I hope this helps, keep warm. Ha

Re: Looking for some new projects.

6330 320-294-5798 shop320-630-2243 cell On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas wrote: Hi Curt You already probably know about this guy but here goes. Projects Archives | Turning for Profit | Woodturning | Lathe | He has like a user group where  he periodically sends out emails that

Re: Looking for some new projects.

st 45 degrees was cut through, the rest took about 10 more tries. Either that or the bit dropped down and started cutting that deep. If I cut the circle for this guy, he may also want me to start cutting out signs. He does something with fabic Harvey Matyas On Sunday, February 14, 2021, 09:00:54 P

Re: Looking for some new projects.

l I had > > a better bit and clamping design. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > &g

Re: for beginners

I got the same error, it has to do with certificates or something like that. I told my virus software to ignore it and it worked. It didn't like it but it works, On Thu, Feb 18, 2021 at 7:51 PM M.W.Foscue wrote: > Bill, > > I tried the below link you sent to the turningaround site. No luck. >

Re: All I could do was shake my head and laugh

Thank you Bill, I just could not believe it when I looked at it after I first installed the hinge.  Once, I replaced all the interior doors at my house.  I had to cut hinges for all of the doors.  The last one, I somehow flipped it.  So when I looked at it, it was about a foot off the ground.  T

Re: All I could do was shake my head and laugh

hit the bike tire, from there it hit the ceiling and thenchipped the basement floor.  Even since I seldom throw objects around. Harvey Matyas On Monday, March 8, 2021, 09:03:01 PM CST, Tim Ziegler wrote: I wasn't laughing the other night when I moved a drying rack and a chain rea

Re: All I could do was shake my head and laugh

mental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Harvey Matyas > *Sent:* Tuesday, 9 March 2021 2:18 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: All I could do was shake my head and laugh > > > > Tim >

Re: last pic table complete

Tim I think that you used some smoke and mirrors to get those pictures of the table.It turned out great.  I can't come up with the right words right now. Harvey  On Tuesday, March 16, 2021, 09:15:03 PM CDT, timjz...@gmail.com wrote: Down sized and still not going -- You receive

Re: Wave 1st ever

I think it looks pretty good. Harvey Matyas On Thursday, March 18, 2021, 08:25:04 PM CDT, Tim Ziegler wrote: Well it's not pretty but it's a start -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To u

Re: smile

I thought that this group was suppose to be none political.It's surprising how people can stay something like screwing everything else upwhen everyone was silent when the country went through the worse economy since the great recession, had the capital under attack and did not say anything.Don't

Re: TEST PICTURE

I can see two pictures of Jake the dog On Mon, Sep 23, 2013 at 2:45 AM, curt george wrote: > ** > Hello Everyone, This is a test to make sure Gene's problem receiving > pictures is not form the group page. He was able to recive one through a > privite e-mail, Please let me know if these picture

Re: Useful device

Here is an interesting twist in at DRO http://www.network54.com/Forum/9013/message/1383042493/Quick+project-+Poor+man%27s+DRO harvey On Wed, Oct 30, 2013 at 8:46 PM, wrote: > Roger, > > I agree with your comment as regards Amazon. I made a poor selection of > words to convey my thought.

Re: New Legacy Drill press

Curt How did you make the z axis? What control how the drill is lowerer? Thank you Harvey On Mon, Dec 16, 2013 at 5:04 PM, curt george wrote: > Thank you Dexter. ;-) > C.A.G. > > - Original Message - > *From:* Dexter Bland > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:*

Re: Old LOM for sale in Milwaukee $600

Mike Did Bob offer me a commission? Harvey On Sat, Jan 24, 2015 at 10:18 AM, Okla Mike (Liltwisted) < legacym...@iglide.net> wrote: > I just spoke with Bob, who listed this machine, as luck would have it, I > will be driving right by his shop on Thursday of next week. The mill is > now mine.

Re: Good, Bad, or indifferent.

I have a 1000 LOM but have not really used it. I do however like reading what everyone is doing with their LOM. I thought that once I retired that I would get more use out of it. However my wife and I have completely different ideas of what retirement means. So 3 days of the week I m working at

Re: Good, Bad, or indifferent.

Have you check junk yards. I belong to the Milwaukee Makerspace and there is a scrap yard that keeps 80/20 parts on the side for us. We buy it based on weight. Someone was able to buy a scrape piece of equipment and is making a 4 ft by 8 ft plasma cutter. Basically, this place takes apart old i

Re: Spindle Drive set up.

Hi Curtis How fast is fast? If you could control the motor, what would a good range for RPM be? Thanks Harvey On Mon, Dec 28, 2015 at 5:58 PM, CURTIS GEORGE wrote: > Hello Everyone. > This is a topic that I keep bring up, but no one ever says anything about > it, So I thought I would try on

Re: wet wet - "It'snow joke"

In Milwaukee, Wisconsin, when it snows they salt the streets and the freeways. This may make it safer to drive but the salt coats the cars and windshields. So sometimes you are constantly spraying the windshield with fluid to keep it clean. The cars get coated with salt and needs to be washed.

Re: wet wet wet - "It'snow joke"

My youngest daughter lived up near Seattle for 3 years. It's a great part of the country. She now lives in New Orleans. So for vacation we get to go to a different part of the country. On Thu, Jan 28, 2016 at 11:36 AM, rookie wrote: > I feel your pain Harvey, I lived near you until last summ

Re: Youtube Video of Barley Twist Being Milled on Legacy Revo

In Greendale WI, a large area may be an acre or 2. I think in my sub division that I have the biggest yard at 1/3 acre. In the City of Milwaukee, a normal yard 120 yards by 80 yards (don't quote me on this). Harvey On Wed, Mar 30, 2016 at 8:24 PM, MWF wrote: > Roger, > > Just curious - in Engl

Re: New Members and Moderation

I have not used the method described on the link below but plan to in the near future. I need to buy the supper glue and accelerant. It is not double sided tape but hopefully a better method. Harvey https://www.youtube.com/watch?v=3uTsQ3dYRrk On Sat, Jun 4, 2016 at 3:30 PM, Phil Burns wr

Re: New Members and Moderation

super glue I’m > defiantly trying this one. > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Harvey Matyas > *Sent:* Monday, 6 June 2016 6:16 AM > *To:* legacy-ornamental-mills@googlegro

Re: Some Ideas - Barbed Wire

I live in a suburb near Milwaukee. The deer are protected because you are can't hunt in this area. If the deer herd gets too big, they hire hunters to thin the herd. However, it is never enough. Two years ago we had over 10 deer in our backyard and another time we had 4 bucks together. They are

New user

Hi I just purchased a new Legacy. I would like to try and make a chess set. Does anyone have any ideas? Thank you. Harvey -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mill

Re: New user

y the chest set. Harvey On Mon, Oct 17, 2011 at 10:12 PM, Harvey Matyas wrote: > Hi > > I just purchased a new Legacy. I would like to try and make a chess set. > Does anyone have any ideas? > > Thank you. > > Harvey > -- You received this message because you ar

Re: New user

e are instructional videos out there for the kit and I'm sure some one > will point you to the right place but if not email me off line and I will > fix you up > Bill > > - Original Message - > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com &

Selling my Legacy

I purchased a used 1000EX Legacy and I sorry to say I have not even turned it on. I was wondering; first is anyone interested, and second how should I present it. I have VCR tapes, router bits, and the unit. I was hoping to make a CNC machine out of it but after reading about doing it I would be b

Re: Selling my Legacy

I'm located in Greendale WI which is a little south of Milwaukee, I'm about a mile south of Southridge which is a bif shopping center (At least in Milwaukee). On Mon, Aug 13, 2012 at 7:45 PM, Harvey Matyas wrote: > I purchased a used 1000EX Legacy and I sorry to say I have not eve

Re: Selling my Legacy

rlds. Its just in idea.that way you do > not loose anything and gain every good part of both ways. ;-) > > Have a good night. > > C.A.G. > > - Original Message - > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Tuesday, August

Re: Selling my Legacy

ght be a solid enough platform for that job? It >> could combine the best of both worlds. Its just in idea.that way you do >> not loose anything and gain every good part of both ways. ;-) >> >> Have a good night. >> >> C.A.G. >> >> - Orig

Message to MAC

MAC I sent an email to your address and it failed, I tried to forward it and it failed also. Harvey -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To un

Making a sign

Has anyone made a sign with the Legacy. I'm asking about something like a park sign. Someone at work want me to engage a sign on cedar. He wants the letters to be about 4 inch. He gave me a pantograph where I would make the letters one by one. Each time I finished a letter I would have to move

Has anyone ever made a 1/5 lock plate?

Has anyone ever made a 1/5 lock plate or have another source or alternative to this piece? SInce I can't install the IS1050 unless I either take off a set of legs or cut a slot in the rails I don't know what to do. The 1/5 lock plate is an alternative but using the IS1050 or something about the

2 Legacys for sale on ebay

Saw these two for sale on ebay http://www.ebay.com/itm/Legacy-Model-1000-EX-60-inch-Ornamental-Milling-System-/251141793579?pt=LH_DefaultDomain_0&hash=item3a7937a72b http://www.ebay.com/itm/Legacy-Ornamental-Mill-Model-1800-/200813956034?pt=LH_DefaultDomain_0&hash=item2ec171cbc2 Harvey --

Re: Happy Larbor day

Actually Curt, I've been looking at you're U-tube video. I would like to duplicate it so that I can make a sign for someone at work. My plan is to use the backend of the Legacy to attach the template follower. I will use bolts on both sides of the unit to hold the template follower and then find

Re: How do I get to the Picture Gallery?

Tim Thank you. Harvey On Wed, Sep 12, 2012 at 7:20 AM, Tim Krause wrote: > ** > http://ornamentalmills.com/gallery/tim_rinehart/peppermill_twist.html > > http://ornamentalmills.com/gallery/gallery.html > > -Tim > > > > - Original Message - > *From:* Harvey > *To:* legacy-ornamental-mi

Add on to control depth of cut on the router

Has anyone any ideas on what to purchase or build to control the depth of the router cut? Like the Saw Trax Floating Router Table on http://www.johngweber.com/jgw/NW/SawTrax/STfrt.htm Or the Shop Smith Pin Router http://www.shopsmith.com/ownersite/catalog/rm_overarmpinrouter.htm The Shop Smith y

Re: Add on to control depth of cut on the router

oating > router table, I need to take a closer look at that one. ;-) > Have a good day. > C.A.G. > > - Original Message - > > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Monday, September 17, 2012 9:20 PM > *Subject:* Add on to con

Re: Add on to control depth of cut on the router

Lewis I would like to try the WoodRat PlungeBar. I have a Bosch 1613EVS. I had to drill two holes in the Legacy to secure the router. What time zone are you in and what are your hours? Thank you Harvey Matyas --

Trimming the outside of a bowl

I'm using a RingMaster to cut rings for a bowl. After I glue up the rings they need to be sanded or? What I was wondering is it the Legacy can have a bowl mounted to it qo that the router can cut the bowl smooth on the outside.I know that if I had a straight column it would work but the bowl

Re: Trimming the outside of a bowl

ures when its done. > C.A.G. > > - Original Message - > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Tuesday, September 25, 2012 7:31 PM > *Subject:* Trimming the outside of a bowl > > I'm using a RingMaster to cut rings fo

Re: Trimming the outside of a bowl

s something to think about though? ;-) > Have a good night. > C.A.G. > > - Original Message - > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Tuesday, September 25, 2012 9:09 PM > *Subject:* Re: Trimming the outside of a bowl >

Re: Add on to control depth of cut on the router

No, I'm on hold right now. I am trying to build something for the Legacy. If it works, I'll let you know On Wed, Oct 3, 2012 at 3:51 PM, Tim Krause wrote: > ** > Did you get the plunge bar? > > - Original Message - > *From:* Harvey Matyas > *

Re: New member ,intro

ll > I would like to introduce myself ,my name is Bill Sullivan,I just joined > the legacy ornamental mill group ,also just purchased a mill .I would like > to thank Tim Krause,Curt George for the help with getting a manual to help > learn how to use My new toy.I hope to learn from &

Re: 1200 for $800 in Northern Idaho

Go for this one instead! http://spokane.craigslist.org/tls/3291375517.html On Fri, Oct 12, 2012 at 2:00 PM, manzoor alam wrote: > I am interested to buy this mill but how do I communicate with comyou > manzoorbd@gmail. > > > On Thursday, October 11, 2012 7:44:50 PM UTC+6, Begat wrote: >> >>

Re: 1200 for $800 in Northern Idaho

gfdj2-3327238...@sale.craigslist.org Above is the link to email the person. I got it from the craigslist site. On Fri, Oct 12, 2012 at 2:00 PM, manzoor alam wrote: > I am interested to buy this mill but how do I communicate with comyou > manzoorbd@gmail. > > > On Thursday, October 11, 2012

Re: 1200 for $800 in Northern Idaho

I also think that you clicked on the wrong link for email since it listed your email address On Fri, Oct 12, 2012 at 5:58 PM, Harvey Matyas wrote: > gfdj2-3327238...@sale.craigslist.org > > > Above is the link to email the person. I got it from the craigslist site. > > > &

Re: New Member

Someday if you have time I would like to see your shop. Maybe we could share ideas or help each orher out. On Sat, Oct 13, 2012 at 5:33 PM, Bill Sullivan wrote: > Harvey, > I have a 13" south bend lathe,also need to set it up though. > Bill > > -- > > > --

Re: Custom 90 degree brackets

Tim What would they be used for and how much would they cost? Also, woul you have to take the Legacy apart? Harvey On Sun, Nov 11, 2012 at 8:15 AM, Tim Krause wrote: > ** > I had a request for a 90 degree bracket that fits the wide channel on the > aluminum rails. Would anyone else be intere

Re: Custom 90 degree brackets

h? > > Thanks > > Gene > > regal...@juno.com > > Please note: message attached > > From: Harvey Matyas > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Custom 90 degree brackets > Date: Sat, 10 Nov 2012 21:06:28 -0600 > > -- > You received

Re: The EVOlution

Does the location of the z-axis, make the unit partly an overhead router? On Wed, Dec 5, 2012 at 9:27 PM, Bill Bulkeley wrote: > > Finally now we know what it looks like nice machine I can see heaps of > modifications I would love to do to it > and it gives me ideas for a few to my old legacy

Re: Discussion session with Legacy

I also would be interested in listening in or watching it later on any subject matter having to do with the manual Legacy. Harvey -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental

Re: Who all was there?

I heard most of the talk, I left from 4:30 to 4:45 or so c) Am I correct in remembering that there were 10,000 manual ornamental mills sold? I thought that he said 10,000 units. During the talk he encouraged the group to share videos and projects with each other. He also mentioned videos on th

Re: Who all was there?

During the event, it had a list of viewers, there were 18 people listed, I think one or two people were listed twice. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, se

Legacy for sale

Hi Someone is selling a Legacy in Eagle, Wisconsin http://milwaukee.craigslist.org/tls/3601790784.html In the first picture, is a red sheet of Material by the gears. What is the purpose of it? Harvey -- You received this message because you are subscribed to the Google Groups "Legacy Orname

Re: Entasis

Is this what you are looking for? Ionic*DESCRIPTION*: Ionic *shafts* were taller than Doric ones. This makes the columns look slender. They also had *flutes*, which are lines carved into them from top to bottom. The shafts also had a special characteristic: *entasis*, which is a little bulge in th

Re: Another 1200 on Ebay -- Oregon

http://www.ebay.com/itm/Legacy-Woodworking-Ornamental-Mill-Model-1200-Complete-With-Router-Table-Z-Axis-/230941503237?pt=LH_DefaultDomain_0&hash=item35c52faf05 Legacy Woodworking Ornamental Mill Model 1200 Complete With Router Table Z-Axis http://www.ebay.com/itm/Legacy-Ornamental-Mill-500-exs-

Legary

http://milwaukee.craigslist.org/tls/3676034778.html Legacy 1200 Ornamental Mill located west of Milwaukee, Wisconsin -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, s

The messy woodworker

I don't know if this is allowed, and if not please delete it. Below is a link to a blog that I started. What I want to do is embarrass myself into getting my workroom cleaned. It will be a long process for me. It has already been effective as I have cleaned off my table saw, Legacy and a work be

Re: The messy woodworker

I took a picture of it, I did not put it in the blog. I will do that tonight or tomorrow. I'm over 100, I thing 114! On Wed, Mar 20, 2013 at 5:01 AM, CURTIS GEORGE wrote: > I see the Dyna Glide, tabel saw... But where is the Legacy in your shop? > What's your count now? have you earned those

Re: Chatter wave

hand carved. But it dose bring > up some idea's... > Thanks Harvey. > C.A.G. > > - Original Message - > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Sunday, April 28, 2013 8:23 PM > *Subject:* Re: Chatter wave > > Cu

Z axis lift

The item list below is for sale close to me. Would this work with the Legacy? Thank you Harvey http://racine.craigslist.org/tls/3782794020.html -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and sto

Re: Z axis lift

ble. > > -Tim > > > - Original Message - > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Friday, May 24, 2013 6:47 PM > *Subject:* Z axis lift > > The item list below is for sale close to me. Would this work with the > Le

Re: Z axis lift

ontrol is > not practical in that case. > > -Tim > > > - Original Message - > *From:* Harvey Matyas > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Saturday, May 25, 2013 7:30 AM > *Subject:* Re: Z axis lift > > Thanks for the advice. I wa

Re: Modifying Legacy Mill with lathe motor

Here's a link of what you can do with routers http://routermillwoodworks.weebly.com/index.html Harvey On Thu, Jun 6, 2013 at 9:32 PM, Brandon Khoury wrote: > Thanks for the ideas and comments. I think the rigidity of the legacy can > be easily increased to compensate for the high speed of the

Re: A rough diamond or a small pollow cut

There are several youtube videos on the shopsmith machine. Below is one of them https://www.youtube.com/watch?v=Ssm1aLgkvsE Harvey On Fri, Jul 5, 2013 at 8:13 PM, curt george wrote: > ** > Hello Mac > I did send this gentleman a message asking if we could see how he set up > and made his mac

Re: A rough diamond or a small pollow cut

Below is a link where a guy uses a lathe and converts it to cnc. Better pictures and he explains things a little bit http://pdxtex.blogspot.com/2012/05/router-lathe-first-threads.html On Sat, Jul 6, 2013 at 1:44 PM, Greg Knudtson wrote: > Note this is being done a shopsmith > > Greg > On Ju

Re: I need more room in my work shop

No, it isn't that big. It is 3 ft by about 20 inches. However, the person that built the work table made it like 6 feet long so that a computer can be placed by it. Harvey On Wed, Sep 18, 2019 at 11:40 AM rtjurg...@gmail.com wrote: > Harvey, will your new cnc be big enough to cut 4x8 sheets

Re: I need more room in my work shop

Curt I would like to sell everything at once. I would part it out if I was sure everything would sell If the group got together and said I will buy the bits for X, and you buy the gear linkage for Y and some else buts the rails for z and the shipping is covered and x y and z is sound $800, I woul

Re: I need more room in my work shop

amental-mills@googlegroups.com> wrote: > Fair enough. > > It never hurt to ask. I have some projects that I am planning to make. > Thank you for your reply. > > C.A.G. > > On Thursday, September 19, 2019, 08:44:32 AM EDT, Harvey Matyas < > hmatyas0...@gmail.com> wrote: >

Re: Odd ball question to our group

Curt Is this what you where trying to find? https://groups.google.com/forum/?hl=en#!searchin/legacy-ornamental-mills/NOVA$20OT$20chuck/legacy-ornamental-mills/fd72hz5XLyU/2HVXwjRIPMgJ Harvey On Sun, Sep 22, 2019 at 9:08 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@goog

Re: I need more room in my work shop

ay - may have interest in the drive motor > (also) $$ asking ? Have the rest so pass it on to a buyer if they do not > need ? > > On Thu, Sep 19, 2019 at 3:51 PM Harvey Matyas > wrote: > >> I know someone else was looking for a motor. >> If a bunch of members can put so

Re: I need more room in my work shop

f question. I > guess were a bit over 6 hours from you. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Tue, Sep 24, 2019 at 5:26 PM Harvey Mat

Re: I need more room in my work shop

? > I understand the 12 hour shift thing been there done that. tough shift. 3 > days? > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Wed, Sep

Re: I need more room in my work shop

9 at 7:42:33 PM UTC-5, Tim Ziegler wrote: >>>> >>>> Harvey I have pix coming stay tuned as they are down loading. >>>> >>>> Kind Regards, >>>> >>>> Timothy J. Ziegler >>>> Ziegler WoodWork & Specialty >>>

Re: I need more room in my work shop

pecialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Thu, Oct 3, 2019 at 8:58 PM Harvey Matyas > wrote: > >> Hi Tim >> Ryan came over to my house and posted pictures on this thread about 7 >> days ago Sept

Re: I need more room in my work shop

s to your Legacy. I am very interested. I >> have to hold ups cash and time to come and get it. >> I will see what I can come up with. here in the next few days. I assume >> the drive motor runs? >> You had not sold anything from it either then? >> >> Kind Regards,

Re: 2006 Legacy LOM 1200

Ryan Looks brand new, good job. Harvey On Tue, Nov 12, 2019 at 8:45 PM Ryan Jurgens wrote: > I have a pretty good dust collector setup now. I set the mill right next > to the collector with its own 4" collector hose, with an option to add a > second. A clean shop is always a goal for me. 😁😁

Re: Russ youtube channel

>From Russ You must be a member. I thought they all knew I have my own youtube channel. I have made many improvements (& videos) to my LOM and I use to notify the group of these in the past. I prefer YouTube for sharing LOM ideas and methods. All Googlegroup members are invited here. I know o

Re: Russ youtube channel

Ryan Try this https://www.youtube.com/channel/UCOEsQRWHC2L6-Y1S2X297Zw Harvey On Wed, Nov 13, 2019 at 9:01 PM Ryan Jurgens wrote: > So how do you find this Youtube channel?.I searched but couldnt find it. > Maybe I am searching the wrong term? > > On Wed, Nov 13, 2019, 8:

Re: Legacy 900 cnc build

Thank you for the information, I was not sure if 23's would work. My problem is the controller I have uses 24 to 36 volts. At least now I may try to connect the steppers to the screws to see what happens. On Sun, Mar 1, 2020 at 5:06 PM IAN wrote: > They are Nema 23 stepper motors with 48 vol

Re: the mad days

What does kangaroo taste like? Do you need a permit or is there a hunting season on them? I don't know anyone that has eaten a kangaroo. On Thu, Mar 19, 2020 at 5:09 PM wrote: > Hi everyone been very quiet lately where is everyone don’t worry you cant > catch the dreaded black death everyone is

Re: the mad days

The only reason that I know about the Spanish flu was when my parents died, we found an old family picture of my grandpa as a child. On the back of the picture it stated within a year all but two (my grandpa and one of his brothers) were dead. My parents never showed us that picture when they we

Re: Legacy Shop Smith Adapter

Curt What a great idea! I was trying to figure out how to adapt the LOM holder to my 4th axis on my CNC machine. I had one "accident" where a centered the piece in the middle of the wood instead of at the beginning. Before I could stop the machine it hit the Nova wood turning chuck right where

Re: Legacy Shop Smith Adapter

Curt Make it out of recycled plastic where the part is made out of different color of plastic to make it look unique and special. Harvey On Sun, Mar 29, 2020 at 2:51 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > I have a question for everyo

Re: Yorkshire grit

Bill Is this what you are talking about? https://www.thewalnutlog.com/woodworking-store/#!/Yorkshire-Grit-USA/c/19617873/offset=0&sort=normal Harvey On Sun, Apr 19, 2020 at 8:46 PM wrote: > Im putting a call out for a tin of Yorkshire grit sanding past, I use it > to sand my work there is

Re: Yorkshire grit

This site has places all over the world. https://yorkshire-grit.com/product-page/ The above link is the USA site. Harvey On Sun, Apr 19, 2020 at 8:56 PM Harvey Matyas wrote: > Bill > > Is this what you are talking about? > > > https://www.thewalnutlog.com/woodworking-store

Re: Want to put a motor my 1200

That is a really nice job on the LOM. impressive! On Thu, Jul 16, 2020 at 7:09 PM Chainlink wrote: > Ok, I finally got around to posting. If anyone has questions, please ask. > The reason I did this exactly the way I did was because I wanted to be able > to reverse it all and go back to a regula

Re: Did anyone get a email from Legacy about their site crashing?

That is correct. I did not open it in case it was a trick. I went on youtube and typed Legacy and I did see several youtube videos. So that is why i posted the message to see if I was the only one or if others did get it and if it was something bad to warn everyone. On Mon, Oct 12, 2020 at 5:

Re: Question to all?

Hi Curtis Instead of the most posts, how about different project ideas or modifications to the LOM? (Just an idea or suggestion) Harvey On Wed, Oct 14, 2020 at 2:28 AM M.W.Foscue wrote: > Hi Curtis, > Sounds Like a good idea to me. > And "Congrats" on scoring that Mill (or parts & accessories

Re: Question to all?

it should not be to hard to re-work the "New" so the old > parts could be used, with the new ball-bearing headstock. It would be the > best of both worlds. > How is that for an idea? ;-) > > C.A.G. > > On Wednesday, October 14, 2020, 02:52:43 PM EDT, Harvey Matyas <

Re: Question to all?

arts, >> Only one box was water damaged, and that box was the manual, paperwork and >> DVD's. So nothing of great valve was lost there! >> >> >> I have set aside the *Design kit* for a prize , If everyone is up for A >> game? >> >> And I have set a

Re: Not done on a LOM but it could

I designed it on Vcarve and then cut it on my 4th axis. I still don't have the machine working the way that I want it. I had to lower the Z axis's zero twice to get it to the dimension that I wanted. Going from the headstock to the tailstock there was a slight drift in dimension going from zero t

Re: Not done on a LOM but it could

I was thinking of doing that also. However, I thought I would try to design something as one unit. I have 2 ovolo router bits that are like 1.5 inch radius and 1.25 inch radius. So I would be able to "cut" a 3 inch and a 2.5 inch ball. I got these two bits not knowing what they were. I also was

Re: Not done on a LOM but it could

Hi Curt The one in black walnut is 5 inches in height Large snowball 1.9 inches, 2nd snow ball is 1.7 inches, head is 1.2 inches, hat is .75 inches, Brim of hat 1.3 inches Second snowman is 4.75 inches high, large snowball is 1.8 inches 2nd snowball is 1.6 inches, head is 1.2 inches, hat is .84 i

Re: Not done on a LOM but it could

The reason for the different sizes is I was using scrap wood, One was from a ballet, one was a piece of blackwalnut from someone's tree that they cut down, and the last one was a branch that I found. On Tue, Nov 3, 2020 at 7:04 AM Harvey Matyas wrote: > Hi Curt > > The one in bla

Re: Not done on a LOM but it could

ke the look, Simple but nice. I too might use a design something like > what you are doing. > Thank you for the idea. > > C.A.G. > > On Tuesday, November 3, 2020, 08:07:00 AM EST, Harvey Matyas < > hmatyas0...@gmail.com> wrote: > > > The reason for the different s

Re: Who wants to buy a priceless piece of art cheap?

Project2 is the priceless object. On Tue, Nov 24, 2020 at 5:57 PM Harvey wrote: > My wife didn't buy it (or like it) either. > > I was right there by the machine watching it when I noticed that the > router bit cut through the piece but it was still together. I hit the > wrong button and before

Re: Who wants to buy a priceless piece of art cheap?

I was trying my first inside ornament. Since I did not know how deep to go on the first side, I took a guess. I was wrong. I will try again but I have already made changes. On the tailstock, I originally drilled a piece of plywood and locked it against the circle plate on the tailstock with a bol

  1   2   >