RE: Old posts - w/Wayback Machine Link
So Bill,For all of us that have not used a "Triple Bit Set" - like you linked below - would you explain the steps involved to create the "BIG Spirals?Also, if you encountered any, what are the pitfalls to watch out for?Thanks.Mac-Original Message- From: bulke...@mmnet.com.au Sent: Aug 14, 2019 5:41 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link I have one too I love it whenever I design a new job I use it saves on wasting wood mind you with all the software out there now these days there is probably better, but I’m a bit old school I like paper and I can hold it in my hands up against where it will go and its full scale. I’m actually going to make more parts to it myself when I get time I want a templates for these bits I like big spirals https://www.magnate.net/SearchResults.asp?Cat=500235 https://www.magnate.net/SearchResults.asp?Cat=501042 so some acrylic and my scroll saw should do itBillFrom: legacy-ornamental-mills@googlegroups.com On Behalf Of Richard EllisSent: Thursday, 15 August 2019 3:36 AMTo: Legacy Ornamental Mills Subject: Re: Old posts - w/Wayback Machine Link BillI have that template follower and also the parts list and diagram, It really is quite a simple set up once you match the right cutters with the pin follower. If I can do it ,,,anyone can. The design kit I have includes all the cutter shapes in plastic and the numbers of the cutters (magnate ) the graph sheets are the length of the Revo bed. Will get round to using it one day... When this house is all sorted and I am not worn out !! CheersRichardOn Wednesday, August 14, 2019 at 6:05:05 PM UTC+1, aussiman wrote:Never mind ray it was worth askingBillFrom: legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> On Behalf Of RaySent: Thursday, 15 August 2019 2:13 AMTo: legacy-orna...@googlegroups.comSubject: RE: Old posts - w/Wayback Machine Link I chased Cindy (she must be sick of me) about the letters. This is the reply “The letter instructions are the template follower instructions. You just line up your lettering in the template rack and use the insert pint to follow the lettering templates. “ From: legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> On Behalf Of bulk...@mmnet.com.auSent: Wednesday, August 14, 2019 12:08 PMTo: legacy-orna...@googlegroups.comSubject: RE: Old posts - w/Wayback Machine Link Its not, the rails on the revo are turned on their sides so the bracket won’t fit, but I did see one pic of the letters. this template bracket is for the other mill modelsBillFrom: legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> On Behalf Of RaySent: Wednesday, 14 August 2019 8:18 PMTo: legacy-orna...@googlegroups.comSubject: RE: Old posts - w/Wayback Machine Link Here’s what I received – that doesn’t look like a Revo version. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1428555004.13883.1565840847730%40wamui-berry.atl.sa.earthlink.net.
RE: Old posts - w/Wayback Machine Link
I have one too I love it whenever I design a new job I use it saves on wasting wood mind you with all the software out there now these days there is probably better, but I’m a bit old school I like paper and I can hold it in my hands up against where it will go and its full scale. I’m actually going to make more parts to it myself when I get time I want a templates for these bits I like big spirals https://www.magnate.net/SearchResults.asp?Cat=500235 https://www.magnate.net/SearchResults.asp?Cat=501042 so some acrylic and my scroll saw should do it Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Richard Ellis Sent: Thursday, 15 August 2019 3:36 AM To: Legacy Ornamental Mills Subject: Re: Old posts - w/Wayback Machine Link Bill I have that template follower and also the parts list and diagram, It really is quite a simple set up once you match the right cutters with the pin follower. If I can do it ,,,anyone can. The design kit I have includes all the cutter shapes in plastic and the numbers of the cutters (magnate ) the graph sheets are the length of the Revo bed. Will get round to using it one day... When this house is all sorted and I am not worn out !! Cheers Richard On Wednesday, August 14, 2019 at 6:05:05 PM UTC+1, aussiman wrote: Never mind ray it was worth asking Bill From: legacy-orna...@googlegroups.com > On Behalf Of Ray Sent: Thursday, 15 August 2019 2:13 AM To: legacy-orna...@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link I chased Cindy (she must be sick of me) about the letters. This is the reply “The letter instructions are the template follower instructions. You just line up your lettering in the template rack and use the insert pint to follow the lettering templates. “ From: legacy-orna...@googlegroups.com > On Behalf Of bulk...@mmnet.com.au Sent: Wednesday, August 14, 2019 12:08 PM To: legacy-orna...@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link Its not, the rails on the revo are turned on their sides so the bracket won’t fit, but I did see one pic of the letters. this template bracket is for the other mill models Bill From: legacy-orna...@googlegroups.com > On Behalf Of Ray Sent: Wednesday, 14 August 2019 8:18 PM To: legacy-orna...@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link Here’s what I received – that doesn’t look like a Revo version. . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEIAvwb6T6jBAhsQozJ%2B8dtABAA%3D%3D%40sky.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEIAvwb6T6jBAhsQozJ%2B8dtABAA%3D%3D%40sky.com?utm_medium=email&utm_source=footer> . <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avast.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/d31ec8cc-04df-474e-a915-22318b402628%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/d31ec8cc-04df-474e-a915-22318b402628%40googlegroups.com?utm_medium=email&utm_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d552e9%2415550a50%243fff1ef0%24%40mmnet.com.au.
Re: Old posts - w/Wayback Machine Link
Bill I have that template follower and also the parts list and diagram, It really is quite a simple set up once you match the right cutters with the pin follower. If I can do it ,,,anyone can. The design kit I have includes all the cutter shapes in plastic and the numbers of the cutters (magnate ) the graph sheets are the length of the Revo bed. Will get round to using it one day... When this house is all sorted and I am not worn out !! Cheers Richard On Wednesday, August 14, 2019 at 6:05:05 PM UTC+1, aussiman wrote: > > Never mind ray it was worth asking > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com < > legacy-orna...@googlegroups.com > *On Behalf Of *Ray > *Sent:* Thursday, 15 August 2019 2:13 AM > *To:* legacy-orna...@googlegroups.com > *Subject:* RE: Old posts - w/Wayback Machine Link > > > > I chased Cindy (she must be sick of me) about the letters. This is the > reply > > > > “The letter instructions are the template follower instructions. You just > line up your lettering in the template rack and use the insert pint to > follow the lettering templates. “ > > > > > > > > > > > > *From:* legacy-orna...@googlegroups.com < > legacy-orna...@googlegroups.com > *On Behalf Of * > bulk...@mmnet.com.au > *Sent:* Wednesday, August 14, 2019 12:08 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* RE: Old posts - w/Wayback Machine Link > > > > Its not, the rails on the revo are turned on their sides so the bracket > won’t fit, but I did see one pic of the letters. this template bracket is > for the other mill models > > > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com < > legacy-orna...@googlegroups.com > *On Behalf Of *Ray > *Sent:* Wednesday, 14 August 2019 8:18 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* RE: Old posts - w/Wayback Machine Link > > > > > > Here’s what I received – that doesn’t look like a Revo version. > > > > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > . > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEIAvwb6T6jBAhsQozJ%2B8dtABAA%3D%3D%40sky.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEIAvwb6T6jBAhsQozJ%2B8dtABAA%3D%3D%40sky.com?utm_medium=email&utm_source=footer> > . > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > Virus-free. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > <#000f01d552c1$a204b180$e60e1480$@mmnet.com.au_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/d31ec8cc-04df-474e-a915-22318b402628%40googlegroups.com.
RE: Old posts - w/Wayback Machine Link
Never mind ray it was worth asking Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Ray Sent: Thursday, 15 August 2019 2:13 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link I chased Cindy (she must be sick of me) about the letters. This is the reply “The letter instructions are the template follower instructions. You just line up your lettering in the template rack and use the insert pint to follow the lettering templates. “ From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> Sent: Wednesday, August 14, 2019 12:08 PM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts - w/Wayback Machine Link Its not, the rails on the revo are turned on their sides so the bracket won’t fit, but I did see one pic of the letters. this template bracket is for the other mill models Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Ray Sent: Wednesday, 14 August 2019 8:18 PM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts - w/Wayback Machine Link Here’s what I received – that doesn’t look like a Revo version. . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEIAvwb6T6jBAhsQozJ%2B8dtABAA%3D%3D%40sky.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEIAvwb6T6jBAhsQozJ%2B8dtABAA%3D%3D%40sky.com?utm_medium=email&utm_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d552c1%24a204b180%24e60e1480%24%40mmnet.com.au.
RE: Old posts - w/Wayback Machine Link
I chased Cindy (she must be sick of me) about the letters. This is the reply “The letter instructions are the template follower instructions. You just line up your lettering in the template rack and use the insert pint to follow the lettering templates. “ From: legacy-ornamental-mills@googlegroups.com On Behalf Of bulke...@mmnet.com.au Sent: Wednesday, August 14, 2019 12:08 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link Its not, the rails on the revo are turned on their sides so the bracket won’t fit, but I did see one pic of the letters. this template bracket is for the other mill models Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Ray Sent: Wednesday, 14 August 2019 8:18 PM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts - w/Wayback Machine Link Here’s what I received – that doesn’t look like a Revo version. . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEIAvwb6T6jBAhsQozJ%2B8dtABAA%3D%3D%40sky.com.
RE: Old posts - w/Wayback Machine Link
Its not, the rails on the revo are turned on their sides so the bracket won’t fit, but I did see one pic of the letters. this template bracket is for the other mill models Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Ray Sent: Wednesday, 14 August 2019 8:18 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link Here’s what I received – that doesn’t look like a Revo version. From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> Sent: Wednesday, August 14, 2019 1:21 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts - w/Wayback Machine Link Can we see it? Bill . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEAKV4V64mpdLqT1SQX11bRkBAA%3D%3D%40sky.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEAKV4V64mpdLqT1SQX11bRkBAA%3D%3D%40sky.com?utm_medium=email&utm_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d55290%247861c7e0%24692557a0%24%40mmnet.com.au.
RE: Old posts - w/Wayback Machine Link
Can we see it? Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Ray Sent: Wednesday, 14 August 2019 9:34 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link Bill’s link worked for me. I have received a copy of the Template Instructions from Cindy – I’m chasing up the Lettering thing. Ray From: legacy-ornamental-mills@googlegroupscom mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of MWF Sent: Wednesday, 14 August 2019 4:37 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts - w/Wayback Machine Link Bill, Thanks - however, the link you posted did not work for me. I did some "poking around" on the WayBack site and found this link worked: <http://web.archive.org/web/20050210073224/https:/legacywoodworking.com/> Legacy Mills pages/postings <http://web.archive.org/web/20050210073224/https:/legacywoodworkingcom/> Enjoy! Mac . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com?utm_medium=email&utm_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d55236%241e11eae0%245a35c0a0%24%40mmnet.com.au.
Re: Old posts - w/Wayback Machine Link
Is that s down load or hard copy? On Tue, Aug 13, 2019, 6:33 PM Ray wrote: > Bill’s link worked for me. > > > > I have received a copy of the Template Instructions from Cindy – I’m > chasing up the Lettering thing. > > > > Ray > > > > *From:* legacy-ornamental-mills@googlegroupscom < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *MWF > *Sent:* Wednesday, 14 August 2019 4:37 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* RE: Old posts - w/Wayback Machine Link > > > > Bill, > > > > Thanks - however, the link you posted did not work for me. > > I did some "poking around" on the WayBack site and found this link worked: > > > <http://web.archive.org/web/20050210073224/https:/legacywoodworking.com/> > > Legacy Mills pages/postings > <http://web.archive.org/web/20050210073224/https:/legacywoodworkingcom/> > > > > Enjoy! > > Mac > > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF11gemW5YdZTfpa%2BPCT-jEGO%3Dk2v175mUtbcjRxjyMPQ%40mail.gmail.com.
RE: Old posts - w/Wayback Machine Link
Bill’s link worked for me. I have received a copy of the Template Instructions from Cindy – I’m chasing up the Lettering thing. Ray From: legacy-ornamental-mills@googlegroupscom mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of MWF Sent: Wednesday, 14 August 2019 4:37 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts - w/Wayback Machine Link Bill, Thanks - however, the link you posted did not work for me. I did some "poking around" on the WayBack site and found this link worked: <http://web.archive.org/web/20050210073224/https:/legacywoodworking.com/> Legacy Mills pages/postings <http://web.archive.org/web/20050210073224/https:/legacywoodworkingcom/> Enjoy! Mac . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com.
RE: Old posts - w/Wayback Machine Link
Loved that lunk!! In the add it linked to the trade shows. The Milwaukee trade show of 2005 is where I say the 1200 LOM live the first time.I saw it again in 2006, and then while in Utah on business I bought mine. I still have it in the original boxez!! One day soon . . . Sent from Yahoo Mail on Android On Tue, Aug 13, 2019 at 5:46 PM, bulke...@mmnet.com.au wrote: #yiv5054655998 #yiv5054655998 -- _filtered #yiv5054655998 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv5054655998 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv5054655998 {font-family:UI;panose-1:2 11 5 2 4 2 4 2 2 3;}#yiv5054655998 #yiv5054655998 p.yiv5054655998MsoNormal, #yiv5054655998 li.yiv5054655998MsoNormal, #yiv5054655998 div.yiv5054655998MsoNormal {margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv5054655998 a:link, #yiv5054655998 span.yiv5054655998MsoHyperlink {color:blue;text-decoration:underline;}#yiv5054655998 a:visited, #yiv5054655998 span.yiv5054655998MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv5054655998 p.yiv5054655998msonormal0, #yiv5054655998 li.yiv5054655998msonormal0, #yiv5054655998 div.yiv5054655998msonormal0 {margin-right:0cm;margin-left:0cm;font-size:11.0pt;font-family:sans-serif;}#yiv5054655998 span.yiv5054655998EmailStyle19 {font-family:sans-serif;color:windowtext;}#yiv5054655998 span.yiv5054655998EmailStyle20 {font-family:sans-serif;color:windowtext;}#yiv5054655998 span.yiv5054655998EmailStyle21 {font-family:sans-serif;color:windowtext;}#yiv5054655998 span.yiv5054655998EmailStyle23 {font-family:sans-serif;color:windowtext;}#yiv5054655998 .yiv5054655998MsoChpDefault {font-size:10.0pt;} _filtered #yiv5054655998 {margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv5054655998 div.yiv5054655998WordSection1 {}#yiv5054655998 Pretty much the same link mac Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of MWF Sent: Wednesday, 14 August 2019 4:37 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link Bill, Thanks - however, the link you posted did not work for me. I did some "poking around" on the WayBack site and found this link worked: Legacy Mills pages/postings Enjoy! Mac -Original Message- From: bulke...@mmnet.com.au Sent: Aug 13, 2019 11:56 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts Ha ha ha ha yea I’ve come across that sight too searching. Here’s a ligit link to some old legacy stuff click on the year and then on the blue dots some things work some don’t but its fun to see the old legacy site again. http://web.archive.org/web/2005030100*/http://www.legacywoodworking.com/ Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Ray Sent: Wednesday, 14 August 2019 1:47 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts You would be surprised how much is out there – a lot of which isn’t in this group. There is a Legacy Ornamental Mill – which is used to crush rocks for example. Always coming up in my searches – surprised they are allowed to use the name. https://www.piccolomini-inn.it/2004/Nov/07_23355.html Ray From: legacy-ornamental-mills@googlegroups.com On Behalf Of bulke...@mmnet.com.au Sent: Tuesday, August 13, 2019 4:10 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts Good one Richard great reading all the old posts again brings back some memories. We all should surf the archives from time to time to see how much we’ve forgotten lolol 😊 Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1659581893.5736.1565721445909%40wamui-berry.atl.sa.earthlink.net. | | Virus-free. www.avast.com | -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d55228%24e415a190%24ac40e4b0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2091780269.3597074.1565738401140%40mail.yahoo.com.
RE: Old posts - w/Wayback Machine Link
Pretty much the same link mac Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of MWF Sent: Wednesday, 14 August 2019 4:37 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts - w/Wayback Machine Link Bill, Thanks - however, the link you posted did not work for me. I did some "poking around" on the WayBack site and found this link worked: <http://web.archive.org/web/20050210073224/https:/legacywoodworking.com/> Legacy Mills pages/postings <http://web.archive.org/web/20050210073224/https:/legacywoodworking.com/> Enjoy! Mac _ _ -Original Message- From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> Sent: Aug 13, 2019 11:56 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts Ha ha ha ha yea I’ve come across that sight too searching. Here’s a ligit link to some old legacy stuff click on the year and then on the blue dots some things work some don’t but its fun to see the old legacy site again. http://web.archive.org/web/2005030100*/http://www.legacywoodworking.com/ <http://web.archive.org/web/2005030100*/http:/www.legacywoodworking.com/> Bill _ From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Ray Sent: Wednesday, 14 August 2019 1:47 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts You would be surprised how much is out there – a lot of which isn’t in this group. There is a Legacy Ornamental Mill – which is used to crush rocks for example. Always coming up in my searches – surprised they are allowed to use the name. https://www.piccolomini-inn.it/2004/Nov/07_23355.html Ray _ From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> Sent: Tuesday, August 13, 2019 4:10 PM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: Old posts Good one Richard great reading all the old posts again brings back some memories. We all should surf the archives from time to time to see how much we’ve forgotten lolol 😊 Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1659581893.5736.1565721445909%40wamui-berry.atl.sa.earthlink.net <https://groups.google.com/d/msgid/legacy-ornamental-mills/1659581893.5736.1565721445909%40wamui-berry.atl.sa.earthlink.net?utm_medium=email&utm_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d55228%24e415a190%24ac40e4b0%24%40mmnet.com.au.
RE: Old posts - w/Wayback Machine Link
Bill,Thanks - however, the link you posted did not work for me.I did some "poking around" on the WayBack site and found this link worked:Legacy Mills pages/postingsEnjoy!Mac-Original Message- From: bulke...@mmnet.com.au Sent: Aug 13, 2019 11:56 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Old posts Ha ha ha ha yea I’ve come across that sight too searching. Here’s a ligit link to some old legacy stuff click on the year and then on the blue dots some things work some don’t but its fun to see the old legacy site again.http://web.archive.org/web/2005030100*/http://www.legacywoodworking.com/ BillFrom: legacy-ornamental-mills@googlegroups.com On Behalf Of RaySent: Wednesday, 14 August 2019 1:47 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Old posts You would be surprised how much is out there – a lot of which isn’t in this group. There is a Legacy Ornamental Mill – which is used to crush rocks for example. Always coming up in my searches – surprised they are allowed to use the name. https://www.piccolomini-inn.it/2004/Nov/07_23355.html Ray From: legacy-ornamental-mills@googlegroups.comOn Behalf Of bulke...@mmnet.com.auSent: Tuesday, August 13, 2019 4:10 PMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Old posts Good one Richard great reading all the old posts again brings back some memories. We all should surf the archives from time to time to see how much we’ve forgotten lolol 😊 Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1659581893.5736.1565721445909%40wamui-berry.atl.sa.earthlink.net.