I recently wanted to send a GEDCOM and when it was set up and
ready to go, I noticed that the icon and the extension was that
of FTM. I tried to make them become a Legacy icon and extension
w/o success. Can anyone solve this problem for me? I did send
the GEDCOM anyway and it seemed to come
Hi, First off I want to thank each of you who have helped me in the past. I
don't always recognize you for your great insights.
Is there a way to print all women and all of the children a man had? This
relative had several children - some with one wife and two mistresses,
alliances and
Anyone found a way to search for those with a particular burial
address? (Recorded within the + following Burial Location which a
city-county-state-country type record) I would like a list of all
buried in three cemeteries relatively close to each other so that I
might visit for photos - but I
Pat,
You don't say what it looked like, and I haven't a clue! My GEDCOMs have the
Windows Data Icon and the GEDCOM extension .ged
Ron Ferguson
_
Tutorials: Programme of adding videos commenced
http://www.fergys.co.uk/
An Individual Report on the man will show all the spouses and children of
each.
CE
From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf
Of Barbara
Sent: Wednesday, August 05, 2009 6:15 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: [LegacyUG] Printing all children
Click MasterAddress ListsEvent. All addresses entered by using that +
sign following an event will be listed. Find the one you want and click
Show List.
CE
-Original Message-
From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf
Of GeoSci
Sent: Wednesday,
Pat:
The problem is not with your file. It is with your setup on your computer.
My guess is the you have installed FTM after you installed Legacy.
Open Windows Explorer
Click on ToolsFolder Options
On the File Types Tab select GED under Extensions
In small blue type you should
Ron:
See my reply to Pat, which I sent to the list a few minutes ago. I just
changed my a few minutes ago and it worked. Unless I have just had another
senior moment, this is a normal occurence and I'm surprised that you didn't
pick up on it right away.
By the way the messages appear to be
CE, I use Legacy Deluxe, I do not see any tab called Master.
If you are referring to ViewMaster Lists Event That only brings up a
listing of events, and does not list the persons who have that event in
their record.
I believe what Keith (and I ) are looking for is a report that lists every
On Wed, 5 Aug 2009 14:38:04 -0400, Dale Warehime dale3...@qis.net
wrote:
The problem is not with your file. It is with your setup on your computer.
My guess is the you have installed FTM after you installed Legacy.
Open Windows Explorer
Click on ToolsFolder Options
On the File Types Tab
On Wed, 5 Aug 2009 08:12:37 -0400, GeoSci geosc...@gmail.com wrote:
Anyone found a way to search for those with a particular burial
address? (Recorded within the + following Burial Location which a
city-county-state-country type record) I would like a list of all
buried in three cemeteries
Keith,
Did you place the cemetery name and address in the Burial
Location field? If so, open that window up and click on the
Address List button. When the next window opens, select the
cemetery for which you want your listing and click on the Show List
button. You can also print the
Go to:
View - Master Lists - Address Lists - Event
There is no tab called Master.
1familytree wrote:
CE, I use Legacy Deluxe, I do not see any tab called Master.
If you are referring to ViewMaster Lists Event That only brings up
a listing of events, and does not list the persons who have
Dale,
I read you post and was not aware that FTM did silly things to the GEDCom. I
have only ever had a brief look at FTM and on a different machine - hence my
ignorance - but now I know :-)
Ron Ferguson
_
Tutorials:
Thanks all for the suggestions; however I had already done just
as Dale had suggested. I did it again making certain that I had
completed every step Dale suggested and then ran a new GEDCOM but
still got the FTM extension. I went to My Computer, down to
Legacy folder and to the GEDCOM folder
Hi,
I go to the individual information screen. Click on the + and bring up the
burial address.
Then click on address list (3rd button from the top on the right) which
brings up the master event address list.
[CE directed you how to reach this list a different way.]
But then you must
click
The Master icon is on the toolbar. My Master icon is between my Merge and
Locations icons.
CE
-Original Message-
From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf
Of 1familytree
Sent: Wednesday, August 05, 2009 11:56 AM
To:
I am preparing some charts to take to a upcoming family reunion.
There are some family members who had a first marriage that ended in divorce
with no children. They had children with their second marriage. Is there a way
to keep the first marriage from printing in the Legacy Charts? It just
Emphasis:
I think I remember from another post from a long time ago that every
time you run FTM it reclaims ownership of the .ged file extension.
The file itself is fine.
I remember something similar. But I sure don't remember where I saw
it. Dennis, do you seem to recall that the way to
On Wed, 5 Aug 2009 11:56:28 -0700, 1familytree
1familytree@gmail.com wrote:
CE, I use Legacy Deluxe, I do not see any tab called Master.
No, but you can place an icon for the Master Lists on the toolbar, This
is probably what CE meant. CE probably just forgot that this icon is not
there by
Robert,
Now it has been mentioned I do very vaguely remember seeing something about
this. From what has just been written by yourself and Dennis, does it also mean
that it cannot be changed using the Windows File Associations? I have no way of
checking this.
Ron Ferguson
I think you're correct; FTM apparently doesn't play nice; however, it doesn't
seem cause a problem as my GEDCOM worked perfectly.
Thanks all,
- Original Message -
From: ronald ferguson
To: legacyusergroup@legacyfamilytree.com
Sent: Wednesday, August 05, 2009 3:22 PM
Dennis - Is there anyway to use ACCESS to populate the burial address
to all those buried in a specific cemetery? I find after viewing the
suggestions here that I have a lot of folks I know are buried in a
specific cemetery, but it would take a lot of key strokes to get this
data into my
Pat Jones wrote
Thanks all for the suggestions; however I had already done just as Dale
had suggested. I did it again making certain that I had completed
every step Dale suggested and then ran a new GEDCOM but still got the
FTM extension. I went to My Computer, down to Legacy folder and to
On Wed, 05 Aug 2009 15:36:43 -0500, Robert Carneal USA
carnea...@adelphia.net wrote:
Dennis, do you seem to recall that the way to stop this from
reoccuring is to remove FTM?
That would certainly stop it. If you remove it you can't execute it and
thus it can never reclaim the association.
On Wed, 5 Aug 2009 14:57:19 -0500, Pat Jones kin-hunte...@cox.net
wrote:
FTM must capture and hold Legacy
hostage unless the whole FTM program is deleted
FTM has only grabbed what used to be called the File Association.
I believe Dale's instructions were correct. You should NOT have to
Is there any way in the lineage report or Descendants List to show the 1/2
brothers and sisters?
- Original Message -
Subject: RE: [LegacyUG] Printing all children from different women
An Individual Report on the man will show all the spouses and children of
each.
CE
From:
It doesn't really reclaim it but yes it does do funny things to it if
you then open it in FTM - it changes it to its proprietary FTW file.
When you go to an export (and I am doing this from memory in that I long
ago took FTM off my computer) you have a choice between an FTM gedcom
and a
Barbara,
What you are asking seems to nmean can you in a lineage or descendant report
include children who are neither from the same lineage nor are descendants. To
which the answer is no.
However if they were linked to the parent of the line in question through
adoption or (I think) as
Pat and listers
For Gedcom extensions.
Go to your windows control Panel Default Programs Associate File Types.
In the Left column you will see all the file suffix extensions that are on
your computer OR are handled by any program you may have installed on your
computer.
Go down to .ged
Thank you for being more specific, as everyone should be when listing steps.
But that only solves the problem if Keith listed the cemetery name and
address within the Burial Place-Burial address fields, AND did not use the
same exact name in the Burial Location field.
My own personal problem
I know this query first appeared a while back, but here are my thoughts:
If you have a child but no parents and then find the name of one parent you
would 'Add a parent '. This would in effect 'create' the parent of the
opposite sex - automatically identified as Unknown by Legacy. If you
On Wed, 5 Aug 2009 15:54:05 -0500, RUNION ROBERT s...@cox.net wrote:
Dennis - Is there anyway to use ACCESS to populate the burial address
to all those buried in a specific cemetery? I find after viewing the
suggestions here that I have a lot of folks I know are buried in a
specific
Lineage is one particular person's lineage, so 1/2 siblings will not show,
whether in View or Report.
In Descendant view and Report, descendants are listed under their parents.
I think the only time you see 1/2 is in the Family View.
You can see a list of someone's siblings by clicking the
THANK YOU EVERYONE! I have used parts of many of the suggestions and
made a list for each cemetery - now I know what to look for! Also
discovered that I have made some errors and several locations were
duplicated - so I was able to correct and consolidate them (doesn't
that seem to always happen
35 matches
Mail list logo
