xorriso : FAILURE : Drive address '/dev/cdrw' rejected because: not existing
and -drive_class 'risky' '/dev'
xorriso : HINT : If the address is a legitimate address for a new regular file,
prepend stdio:
xorriso : FAILURE : -as cdrecord: Job could not be performed properly.
xorriso : aborting :
I just completed the LFS project but I'M having trouble loading up.
autorun DONE
[ 1.9945e0] CFS: Cannot open root device hda1 or unknown-block(0,0):
error -6
[ 1.994633] Pleaes append a correct root= boot option; here are the
available partitions:
[1.994732] Kernel panic - not syncing:
hda1. I set the first part to hd0,1 and further down o the configuration file I
set it to hda1 as well.
Date: Mon, 15 Oct 2012 17:19:10 -0500
From: bruce.du...@gmail.com
To: lfs-support@linuxfromscratch.org
Subject: Re: [lfs-support] Booting LFS
Garrett Gaston wrote:
I just completed
I know it's unusual for it to be hda rather than sda but it is hda. It's very
strange, the first time I did LFS on the same computer it was sda until it came
to the boot grub.cfg file, then it wouldn't boot unless I referenced it as hda
even though the entire rest of the project sda sufficed.
I ran my script( http://pastebin.com/95jDZ7ds ) for chapter 6.33 Bash-4.2 and
the prompt ended up just being bash and thus never seeing my FLAG file or GOOD
being echoed to the screen. Was my script still successful? I'M thinking that
it was and that it just entered bash as part of the last
I did run mount -v -t ext4 /dev/hda1 $LFS
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
I got it. Each time a reboot the LFS box I'M having to run all the commands on
page http://www.linuxfromscratch.org/lfs/view/stable/chapter06/kernfs.html
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ:
on page http://www.linuxfromscratch.org/lfs/view/stable/chapter06/gmp.html I'M
not sure if the processor is 64 bit capable or not. And what should I do with
the command ABI=32 ./configure ...? Does that command really end with three
dots or are they placeholders for something else?
From: garret...@hotmail.com
To: lfs-support@linuxfromscratch.org
Date: Wed, 10 Oct 2012 15:29:40 -0500
Subject: [lfs-support] 6.14
on page http://www.linuxfromscratch.org/lfs/view/stable/chapter06/gmp.html I'M
not sure if the processor is 64 bit capable or not. And what should I do with
On page http://www.linuxfromscratch.org/lfs/view/stable/chapter06/kernfs.html
the command mount -v --bind /dev $LFS/dev is returning mount: mount point
/mnt/lfs/dev does not exist. I take it that something changed
while I was working on the project, I mean after shutdown the LFS machine and
I've written the script below for starting the exiting the chroot environment
for starting and stopping the LFS project. I'M concerned about the logout and
umount commands. I need the script to do all the unmounts upon exiting or
logging out. I'M afraid what I've written here will simply
Last time I did the LFS project I had to write all my scripts for chapter 6
from another shell from the host system. This time around I'd like to go ahead
and be able t write my chapter 6 scripts from within the chroot environment.
I'M currently in chapter 5, should I be installing vi now or
I got the following for gclibc, any ideas?
make[1]: Leaving directory
`/mnt/lfs/sources/Chapter-5/5.7._Glibc-2.16.0/glibc-2.16.0'
/mnt/lfs/tools/bin/../lib/gcc/i686-lfs-linux-gnu/4.7.1/../../../../i686-lfs-linux-gnu/bin/ld:
cannot find crt1.o: No such file or directory
Thanks. Do you happen to know exactly what chapter/page of LFS that this
symlink is created? Thanks.
Date: Thu, 27 Sep 2012 19:05:01 -0400
From: baho-u...@columbus.rr.com
To: lfs-support@linuxfromscratch.org
Subject: Re: [lfs-support] glibc
On 09/27/2012 06:40 PM, Garrett
On chapter 2.3. Creating a File System I'M told to issue the command mkswap
/dev/xyz for initialization purposes.
The thing is I created and set up my three partitions before starting LFS. sda1
will be my LFS, sda2 is swap, and sda3 is my host system. So how important is
this command because
After creating your partitions, did your system update the block
devices available? Sorry, I don't know what that means.
The host portition in this case is my previous build of LFS. The computers has
been restarted many time since I set up the partitions.
--
I do understand that swap can be used by all linux systems on the machine, my
questions was on the importance of initialzing it and and the errors I was
getting from enter the given LFS commands.
I also understand that thing change over time, I was well aware that HDs use to
be refered to as
I recently completed the LFS project and I successfully used Debian as my host
system. Don't remember where but I did find a Debian, one CD or maybe it was a
DVD I don't remember, install disk. --
http://linuxfromscratch.org/mailman/listinfo/lfs-support
Here on chapter 8.3 the command make modules_install is giving me the following
warning upon completion.
Warning: you may need to install module-init-tools
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ:
I finished LFS but it will not boot. When powering on the computer I get a boot
screen showing one option, GNU/Linux, Linux 3.2.6-lfs-7.1. When selected
with ENTER I get Press any key to continue, then it goes back to the same
boot screen with the same option. Any ideas.
I haven't yet fixed Debian's boot process but I tried to fix the LFS
boot loader, I edited files via ssh as usual, I just had to download and
burn a boot cd to get it up and running. I got a little progress in
that now LFS is trying to start but I'M getting a couple of errors.
2.033750] VFS
sda1 is the LFS system
sda2 is the swap partition
sda3 is the host Debian system
Debian grub.cfg
http://pastebin.com/s7avRXM1
LFS grub.cfg
http://pastebin.com/Pmw1KQVG
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ:
According to the LFS book I'M done but when I rebooted the computer my host
Debian system is the only thing starting up or listed in the boot window. I
noticed LFS also gave a link on page 8.4 xorriso, that is required for
running the commands on the using grub page, that link is broken. This
Thanks
http://www.linuxfromscratch.org/blfs/view/svn/multimedia/libisoburn.html
Does the above package need to me installed on the host or LFS system?
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ:
From: garret...@hotmail.com
To: lfs-support@linuxfromscratch.org
Date: Wed, 29 Aug 2012 17:43:07 -0500
Subject: [lfs-support] I think I'M done with ch 6
I think I'M not with chapter 6 unless I need to do the stripping
Near the top of 8.3 there are instructions on configuring the kernel. I'M
confused because these instructions are at the top of the page well before the
kernel has actually been installed. --
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ:
I think I'M not with chapter 6 unless I need to do the stripping
http://www.linuxfromscratch.org/lfs/view/stable/chapter06/strippingagain.html
Apart from that all I see left is that I need to modify the go-lfs script to
the new one given on the last page of chapter 6
I placed all the commands for chapter-6, bash into a script and then executed
it. A the bottom of the page all I see is make[1]: Leaving directory
`/sources/Chapter-6/6.31._bash-4.2/po' at the bottom of the page with no prompt
in sight. Does this look and sound right? Is it likely still
Below is what I'M getting:
if test bash = gettext-tools; then \ /bin/sh
/sources/Chapter-6/6.31._Bash-4.2/bash-4.2/./support/mkinstalldirs
/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin
quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin
Below is what I got for gcc on chapter 6. I placed all the commands from
http://www.linuxfromscratch.org/lfs/view/stable/chapter06/gcc.html in a script
using at the end of each line. Does anyone have any idea which command from
that page could have produced the following error? Thanks.
`/tools/bin/ld' - `/tools/bin/ld-old'`/tools/i686-pc-linux-gnu/bin/ld' -
`/tools/i686-pc-linux-gnu/bin/ld-old'mv: cannot stat `/tools/bin/ld-new': No
such file or directory
The placed all the commands for
http://www.linuxfromscratch.org/lfs/view/stable/chapter06/readjusting.html in a
bash
Sorry, what does top post and trim replies mean?
Date: Sat, 18 Aug 2012 21:40:03 -0500
From: bruce.du...@gmail.com
To: lfs-support@linuxfromscratch.org
Subject: Re: [lfs-support] glibc pass 2 chapter-6
Garrett Gaston wrote:
Sorry, I'M talking about glibc in chapter 6
This is what I got for the make -k check command for glibc on chapter 6
/bootparam.h sysvipc/sys/ipc.h sysvipc/sys/msg.h sysvipc/sys/sem.h
sysvipc/sys/shm.h termios/termios.h termios/sys/termios.h
termios/sys/ttychars.h time/time.h time/sys/time.h time/sys/timeb.h
wcsmbs/wchar.h
`/tools/bin/ld' - `/tools/bin/ld-old'`/tools/i686-pc-linux-gnu/bin/ld' -
`/tools/i686-pc-linux-gnu/bin/ld-old'mv: cannot stat `/tools/bin/ld-new': No
such file or directory
This is from some of the fist commands on 6.10, I thought I was following
everything, clearly I've missed something. Any
: [lfs-support] my message is awaiting moderator approval
Garrett Gaston wrote:
I sent an email to lfs-support but it's awaiting moderator approval.
It had an attachment, I think it was less than 1MB. Any ideas on when
or if the email will be approved? I really need some help here guys
I have deviated from the book just a little. Instead of just typing the
commands I'M placing all the commands for each page in a script called bld and
running the script. In the script I'M appending each line with so what each
line will not proceed unless the previous line succeeded, in
I sent and email to the lfs support mail list over an hour ago and it has never
appeared in my inbox, is this normal? --
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above
37 matches
Mail list logo
