On Mon, 12 Mar 2012 02:19:57 +
Martins Gulbis l...@tentyten.com wrote:
I started with the config used for the ubuntu
system running on my system and ran make oldconfig. Currently under USB
support I have the following included:
Support for Host-side USB
USB verbose debug
On 3/12/2012 2:38 AM, Andrew Benton wrote:
Don't have both OHCI and UHCI, use one or the other. Most systems use
UHCI, try disabling OHCI. Andy
When I have only UHCI enabled, it still acts the same. I have also
tried only OHCI enabled, UHCI disabled. There were no
connect-disconnect events,
Martins,
Maybe you could try to disable EHCI.
By the way, I forgot to tell you. You could stop all those kernel messages with:
dmesg -n1
or:
echo 1 /proc/sys/kernel/printk
or in LFS you can make this permanent by seting LOGLEVEL=1 in the
file /etc/sysconfig/console or in /etc/sysconfig/rc.site.
On Sun, 11 Mar 2012 14:45:02 -0700
Martins Gulbis l...@tentyten.com wrote:
Well, I bought and installed a new mouse. NO CHANGE. One interesting
thing that I did notice though is that the disconnects/re-connects
occur almost exactly every 60 seconds. I am not sure what to make of
that. I am
On 3/12/2012 8:07 AM, Juan Alberto Regalado Galván wrote:
Martins,
Maybe you could try to disable EHCI.
By the way, I forgot to tell you. You could stop all those kernel messages with:
dmesg -n1
or:
echo 1 /proc/sys/kernel/printk
or in LFS you can make this permanent by seting LOGLEVEL=1 in
Martins,
I guess I would use dmesg -n1 right
after logging in, or better yet include it in ..bash_rc or .bash_profile.,
correct?
I could better set the variable LOGLEVEL=1 in the file
/etc/sysconfig/console or in /etc/sysconfig/rc.site which has the same
effect as dmesg -n1.
About the error
On 3/12/2012 9:35 AM, Aleksandar Kuktin wrote:
Just a check, did you try the mouse with some other distro? You
mentioned Ubuntu, does Ubuntu (or whatever) have the same problem?
I have never had a problem with or have I seen any messages about the
usb mouse with ubuntu
Mar tins
--
I just finished getting my LFS 7.0 system to finally boot ok. However
the usb mouse I have connected seems to be constantly disconnecting and
reconnecting after the system boots, filling the screen constantly
connect/disconnect messages like the following :
[ 61.704062] hub 2-0:1.0: state
On Sun, 11 Mar 2012 14:33:47 +
Martins Gulbis l...@tentyten.com wrote:
I just finished getting my LFS 7.0 system to finally boot ok. However
the usb mouse I have connected seems to be constantly disconnecting and
reconnecting after the system boots, filling the screen constantly
On 3/11/2012 8:06 AM, Andrew Benton wrote:
On Sun, 11 Mar 2012 14:33:47 +
Martins Gulbisl...@tentyten.com wrote:
I just finished getting my LFS 7.0 system to finally boot ok. However
the usb mouse I have connected seems to be constantly disconnecting and
reconnecting after the system
On 3/11/2012 8:26 AM, Martins Gulbis wrote:
On 3/11/2012 8:06 AM, Andrew Benton wrote:
On Sun, 11 Mar 2012 14:33:47 +
Martins Gulbisl...@tentyten.com wrote:
I just finished getting my LFS 7.0 system to finally boot ok. However
the usb mouse I have connected seems to be constantly
Hello Martins,
It seems like a speed problem:
[ 186.450841] ehci_hcd :00:1d.7: GetStatus port:2 status 001403 0
ACK POWER sig=k CSC CONNECT
[ 186.450854] hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
...
[ 186.605119] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[
On 3/11/2012 3:34 PM, Juan Alberto Regalado Galván wrote:
Hello Martins,
It seems like a speed problem:
[ 186.450841] ehci_hcd :00:1d.7: GetStatus port:2 status 001403 0
ACK POWER sig=k CSC CONNECT
[ 186.450854] hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
...
[ 186.605119]
Hi Martins,
... the usb mouse I have connected seems to be constantly disconnecting and
reconnecting
after the system boots, filling the screen constantly connect/disconnect
messages
like the following ...
I wouldn't chuck my mouse out the window yet.
I've been plagued by these nonsensical
On 3/11/2012 7:41 PM, al...@verizon.net wrote
If you haven't gotten rid of your mouse and are still interested in
his wise words, I might be able to publish his answer for you in a few
days. Good luck in all your endeavors, -- Alex
I did buy another inexpensive usb mouse and found that there
On Mar 11, 2012, at 7:19 PM, Martins Gulbis wrote:
Support for Host-side USB
USB verbose debug messages
USB announce new devices
*** Miscellaneous USB options ***
USB device filesystem (DEPRECATED)
USB Monitor
*** USB Host Controller Drivers ***
xHCI
16 matches
Mail list logo