Hi Dan,
There is no file /dev/sndstat. Can it be known by another name?
Try the command ossinfo
73
Leif / SM5BSZ
#
This message is sent to you because you are subscribed to
the mailing list linrad@antennspecialisten.se.
To
Leif,
That command does not exist. This configurations appears to be ALSA with
alsa-oss. There is a file /etc/asound.state that shows a CS46xx. This is
the sound device.
Below are the snd modules installed:
snd_rtctimer3360 0
snd_intel8x0 31260 0
snd_ac97_codec
Hello Dan,
That command does not exist. This configurations appears to be ALSA with
alsa-oss. There is a file /etc/asound.state that shows a CS46xx. This is
the sound device.
Below are the snd modules installed:
snd_rtctimer3360 0
snd_intel8x0 31260 0
Hi Dan,
I followed that sequence and selected U, everything worked as described
below. There is no option for selecting a sound card. It jumps to
requesting baud rate, reporting lack of ability to perform input and
output together, and then seg faulting.
If there is only one possibillity
Leif,
You are correct. The output stays on the screen until the key is hit.
The trace output is:
/dev/dsp62
/dev/dsp
/dev/dsp64
(/dev/dsp63 is missing)
The error message segmentation fault appears in the terminal box.
- Regards - Dan
Leif,
The log is:
/dev/dsp opened as RDONLY
16bit format supported
Max no of channels = 4
Max speed 192000 Hz
Min sampling speed = 1000 Hz
FLAG= 1
j=0 k=0
63:/dev/dsp 1000 - 192000 Hz 4 Chan. 16 bit
Hi Dan,
/dev/dsp opened as RDONLY
16bit format supported
Max no of channels = 4
Max speed 192000 Hz
Min sampling speed = 1000 Hz
FLAG= 1
j=0 k=0
63:/dev/dsp 1000 - 192000 Hz 4 Chan. 16 bit
Leif,
There is no file /dev/sndstat. Can it be known by another name?
- Dan
The result is very odd. Linrad tries to open all these devices.
The statement is
rx_audio_out=open( dev_name, O_WRONLY|O_NONBLOCK, 0);
for each one of the device files and they all give
rx_audio_out=-1 which is an
You come to the main screen that lists:
A=Weak Signal CW
B=Normal CW
C=Meteor Scatter CW
D=SSB
E=FM
G=QRSS CW
H=TX TEST
I=SOUNDCARD TEST MODE
J=ANALOG HARDWARE TUNE
M=Init Moon Tracking and EME DATABASE
M=NEtwork Setup
S=Global Parms Setup
U=A/D and D/A setup for RX -THIS IS SOUNDCARD
Roger,
I followed that sequence and selected U, everything worked as described
below. There is no option for selecting a sound card. It jumps to
requesting baud rate, reporting lack of ability to perform input and
output together, and then seg faulting.
- Thanks again, Dan
Roger Rehr
10 matches
Mail list logo
