Hello Stan, > I am having trouble getting WLR2-25 started, after > I use the default settings > The screen is normal, I just can not activate it. > Delta-44 is selected, for in and out. > WLR2-24 starts up nicely with a left mouse button click.
Linrad-02.24 never opens the audio output and therefore it runs fine with the Delta 44 as input. This was a bug that I corrected by opening the output when the output thread starts in 02-25. I never use the Delta 44 for output, there is no need to generate high speed output for a narrowband signal, the Delta 44 uses the same speed in both directions. As it turns out, the Delta 44 driver under Windows does not work if the output is opened (and not written to) before the input is opened. The read statement from the A/D becomes blocked. (Under Linux it is OK.) I have verified that the Windows device works if the output is opened after data has been read from the input. Then the input will not block. (I have not actually listened, but since read and write run at the proper speeds I assume everything is fine) I will make some changes for the next version. In the meantime I suggest you use some other soundcard for the output. (This will be good anyway, the Delta 44 outputs are reserved for the transmit side and the inputs on the cheap soundcard are for microphone and rectified RF envelope input.) 73 Leif / SM5BSZ ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
