Re: FTP and Telnet not working in Linux 390 lpars

I think this depends upon the type of card. I have had no problem communicating to other 'connections' of a shared OSA. Our card was an ENTR in half duplex mode. On Friday 01 March 2002 10:58 am, you wrote: > >yes, we are sharing an osa card between the lpars. > > That is your problem. It is d

Re: Help - z/VM SAF Linux Install

Thanks for the clarification, Alan. That makes more sense but that brings up another question: What advantages/gains are you getting by having a VM between your guest VM's and the LAN? I can see flexibility of having the first VM act like a router so you can route your guest VM's to multiple sub

Re: Linux/390 at cheapbytes.com

Hello from Gregg C Levine normally with Jedi Knight Computers Scott, ever since I met an "Emperor" Penguin, at the LWE show last year, and even this year, that's all I have been doing. And I am still a firm supporter of the Rebel Alliance, and the Old Republic, even. Sorry, but your statement brin

Re: Linux/390 at cheapbytes.com

On Thursday 28 February 2002 01:19 pm, Post, Mark K wrote: > Well folks, I think we've "arrived." I was at http://www.cheapbytes.com > today, and I stumbled across these items. [...] > Catalog No.: 0070010778 > Publisher: CheapBytes > Includes 3 CD-ROMs > CheapBytes ThinkBlue S/390 Linux 7.1a CD-

Re: Swap not starting

You didn't say what distribution or release you're using. For SuSe, check out http://linuxvm.org/Info/HOWTOs/vdiskswp.html "Never trust any computer you can lift." Gordon Wolfe, Ph.D. (425)865-5940 VM Technical Services, The Boeing Company > -- > From: Post, Mark K > Reply To:

Re: Swap not starting

I usually use > /tmp/swaplog 2>&1 I have found instances where stderr didn't always get redirected unless specifically mentioned. "Post, Mark K" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 03/01/2002 15:56:20 Please respond to Linux on 390 Port <[EMAIL PROTECTED]> Sent by: Linux on 390 Por

Re: Swap not starting

Larry, The /etc/rc.d/boot script does start LVM before doing the swapon command, so you should be fine there. Still, you might try changing your swap volume to a swap file on the root file system and see if you still have the problem. If you don't want to do that, try changing /etc/rc.d/boot so

Re: Volume groups not found

Gordon, Try checking the contents of /etc/lvmtab and /etc/lvmtab.d/* from your backups (you do have them don't you?) and see if they match what's there currently. If not, perhaps tweaking the contents of those directories and files would allow the vgchange command to proceed. Mark Post -Or

Re: Swap not starting

The messages appearing at boot time should be available at /var/log/boot.msg Also samba log should be at /var/log/log.smb Samy Rengasamy. -Original Message- From: Lawrence Hanus [mailto:[EMAIL PROTECTED]] Sent: Friday, March 01, 2002 2:12 PM To: [EMAIL PROTECTED] Subject: Swap not start

Volume groups not found

This is crossposted to both the Linux-390 list and the Linux-LVM list. Sorry for the duplicates, but I'm desparate. I've been running more than a dozen Linux guests under z/VM running SuSE Linux/390 with the 2.2.16 kernel. This was supplied with LVM 0.8-157. We are in the process of upgrading t

Swap not starting

I am a mainframe'er fairly new to the Linux world looking for some help. We are experiencing several startup problems at boot time. In our /etc/rc.d/boot script we have "swapon -a -v &> /dev/null/' (without the quotes). We have also added echo statements to make it visible on the HMC during IPL.

Re: Running 31bit SuSE 7.0 2.2.16 under 64 bit z/VM 4.2

Richard: Yes. 64-bit z/VM supports 31-bit guests, as well as 64-bit guests. Romney On Fri, 1 Mar 2002 11:27:27 -0700 Richard Feldman (WFF) said: >To: LINUXLST--WFFCAL Linux 390 Discussi > >Subject: Running 31bit SuSE 7.0 2.2.16 under 64 bit z/VM 4.2 > >Currently we are running SuSE 7.0 2.

Code Drop - glibc 2.2.5, glibc 2.2.4/5 + binutils bug-fixes, Kernel 2.4.7 qdio/qeth OCOs with HiperSockets bug-fix

Linux for S/390 & zSeries: Please check out the DeveloperWorks page at: http://www10.software.ibm.com/developerworks/opensource/linux390/whatsnew.shtml On the Recommended level 2.4.7 page at: http://www10.software.ibm.com/developerworks/opensource/linux390/current2_4.shtml you will find: - Recom

Running 31bit SuSE 7.0 2.2.16 under 64 bit z/VM 4.2

To: LINUXLST--WFFCAL Linux 390 Discussi Subject: Running 31bit SuSE 7.0 2.2.16 under 64 bit z/VM 4.2 Currently we are running SuSE 7.0 2.2.16 under VM/ESA 2.4. I'm building a new z/VM 4.2 system that will initially run 31bit. I will soon test my Linux box in the 4.2 machine. We are current

Re: FTP and Telnet not working in linux 390 lpars

hello, we have OSA gigabit express available. are there any setup issues to be aware of. regards, steve "Peter Webb, Toronto TransitTo: [EMAIL PROTECTED] Commission"cc:

Re: Help - z/VM SAF Linux Install

On Thursday, 02/28/2002 at 02:36 PST, Todd Booher <[EMAIL PROTECTED]> wrote: > Being a S390/VM newbie, please excuse my ignorance > > Is it a hard and fast rule that the Linux guest OS cannot be in the > same subnet as z/VM? In using other VM products (like vmware) this > doesn't seem to be a

Re: FTP and Telnet not working in Linux 390 lpars

>yes, we are sharing an osa card between the lpars. That is your problem. It is documented (some where) that a shared OSA can not communicate with itself (so to speak). So the idea of sending all packets to your router first makes sense. Mark D Pace Senior Systems Engineer Mainline Informati

cpint-1.2.2 fails in 64Bit if RAM=2G

Hello to all cpint user! / Hello Neale Ferguson! I think I've discovered a bug in cpcmd.c When running hcp in a Guest with 2GB hcp fails with a segmentation violation. The same code runs very well if the guest just has 1GB. Process hcp (pid: 1013, stackpage=79039000) Kernel PSW:0700

Re: FTP and Telnet not working in linux 390 lpars

I got around the LPAR-to-LPAR OSA limitation by sending all packets destined for the other lpar, to my default router. (i.e. a static route def) That worked for me. Dave

Re: FTP and Telnet not working in linux 390 lpars

See and . > -Original Message- > From: Steve Gear Schneider Technical Services [SMTP:[EMAIL PROTECTED]] > Sent: Friday, March 01, 2002 10:18 AM

Re: FTP and Telnet not working in linux 390 lpars

hello, the lpars on are the same CEC and sharing a OSA card. the ip addresses for all look like. xxx.xxx.3.xxx net mask is 255.255.255.0 regards, steve Mark.Pace@ncgic orp.comTo: [EMAIL PROTECTED] Sen

Re: Help - z/VM SAF Linux Install

Sort of. VM TCP/IP functions like a router. If an internal interface and an external interface are in the same subnet, how can it tell which way to send a packet? The exception is when you use Proxy ARP. I only sort of understand this. The place to go is SHARE, and one of Alan Altmark's presentati

Re: FTP and Telnet not working in linux 390 lpars

hello, thanks for your response. yes, we are sharing an osa card between the lpars. one of the newer ones i believe. as far the the magic goes, are there any documented techniques? regards, steve "Peter Webb, Toronto TransitTo: [EMA

Re: FTP and Telnet not working in linux 390 lpars

I had the same issue a while back. The problems was in the subnetting and the subnet mask. You may have to give use some examples of your network setup to have someone be able to give you a more definitive answer. Mark D Pace Senior Systems Engineer Mainline Information Systems 1700 Summit La

Re: FTP and Telnet not working in linux 390 lpars

Are you by any chance sharing an OSA card between the LPARS? IIRC with the older (maybe newer ones too) OSA cards, you cannot talk between LPARS when the card is shared. You may have to do some magic with a router to get it to work. > -Original Message- > From: Steve Gear Schneider Techni

Re: FTP and Telnet not working in linux 390 lpars

hello, i can, ping,ftp,telnet from the outside to the linux lpars ping,ftp,telnet from inside the linux lpars to the outside i cannot, ping,ftp,telnet from linux lpar to linux lpar regards, steve Rob van der Heij

Re: Logon to VM with running PROFILE EXEC

Thanks for all the great replies in record time!!! Dan

Re: Logon to VM with running PROFILE EXEC

Daniel, Here is a sample of what I use on my LINUX images. <> Loren Charnley, Jr. Tech Support Administrator Family Dollar Stores, Inc. Phone: (704) 847-6961 Ext. 2000 > -Original Message- > From: Hines Daniel (sys1dmh) [SMTP:[EMAIL PROTECTED]] > Sent: Friday, March 01, 2002 8:48 AM

Re: Logon to VM with running PROFILE EXEC

Here is another example of how to test to see if you are logged on to the terminal or disconnected. 'DESBUF' 'EXECIO * CP (STRING Q' userid() pull answer parse value answer with name '-' status other IF STATUS = 'DSC' THEN DO 'CP IPL 201 CLEAR' END Mark D Pace Senior Systems Eng

Re: Logon to VM with running PROFILE EXEC

Another alternative is to have the PROFILE EXEC check whether the user is disconnected, and if so, proceed with the IPL of Linux, if not just exit.

Re: Help - z/VM SAF Linux Install

If you have the configuration Net VM -- Linux guests They can be on the same net or a different net if all you want to do if want to is to talk among the images and VM. I f you want talk from the images to the net then you need proxy ARP. T

Logon to VM with running PROFILE EXEC

Hello - I recall from my limited VM experiences of many years ago a way to logon to a VM user without executing the PROFILE EXEC. Anyone have the command?? I would like to be able to AUTOLOG my Linux images and have them auto IPL but also want to be able to signon for maintenance purposes withou

Re: Logon to VM with running PROFILE EXEC

I have the PROFILE EXEC in my linux servers check the console. If it is 'disconnected', then the profile automatically IPLs the linux bootdisk. If the console is on a terminal then the profile prompts for approval to continue the linux session. This way I can chose whether to exit the ipl process

Re: Logon to VM with running PROFILE EXEC

Make sure the Directory does not state IPL CMS PARM AUTOCR, this performs the auto for you. If you have just IPL CMS and the user is autologged the automatic is done for you. If you LOGON through a Terminal you will see the CMS Prompt and see VM READ in the bottom right corner of your screen. No

Re: Logon to VM with running PROFILE EXEC

Try: Logon X noipl IPL CMS PARM NOSPROF at the CMS prompt acc (noprof You will get a CMS machine with almost nothing, which might be a little extreme. If so you probably can leave off the PARM NOSPROF. To: [EMAIL PROTECTED]

Re: Help - z/VM SAF Linux Install

Being a S390/VM newbie, please excuse my ignorance Is it a hard and fast rule that the Linux guest OS cannot be in the same subnet as z/VM? In using other VM products (like vmware) this doesn't seem to be a problem. Just curious. Todd -Original Message- From: Peter Webb, Toronto T

Red Hat Linux for zSeries

Thanks a lot for all the feedback about our initial zSeries upload. We have made incremental updates to that version and have now a Release Candidate (RC) available from: ftp://ftp.redhat.com/pub/redhat/linux/rawhide/s390x/ This version does now go through our Red Hat Linux Quality Assura