Thanks Linus W,
On 13/05/14 09:28, Linus Walleij wrote:
code is conditioned on hw designer.
Signed-off-by: Srinivas Kandagatla
(...)
+ if (host->hw_designer == AMBA_VENDOR_QCOM) {
+ host->cclk = host->mclk;
+ } else if (desired >= host->mclk)
On Tue, Apr 29, 2014 at 10:20 AM, wrote:
> From: Srinivas Kandagatla
>
> MCICLK going to card bus is directly driven by the clock controller, so the
> driver has to set the required rates depending on the state of the card. This
> bit of support is very much similar to bypass mode but there is
From: Srinivas Kandagatla
MCICLK going to card bus is directly driven by the clock controller, so the
driver has to set the required rates depending on the state of the card. This
bit of support is very much similar to bypass mode but there is no such thing
called bypass mode in MCICLK register o
