Hello,
We are trying to setup a 2 node RHEL 6.5 oracle HA cluster in
Active/passive mode.
Each node has 2 nics, one connected to outside world and other private
VLAN for heartbeat connections.
The network admin here is claiming that if the external switch is down or
cable is unplugged, how can
Hello,
I am trying to setup a simple 2 node cluster in active/passive mode for
oracle high availability
We are using one INSPUR server and one HP proliant (Management decision
based on hardware availability) and we are seeing if we can use IPMI as
fencing method
CCHS though supports HP ILO,
Hello
I am getting the following error when i run ccs_config_Validate
ccs_config_validate
Relax-NG validity error : Extra element clusternodes in interleave
tempfile:12: element clusternodes: Relax-NG validity error : Element
cluster failed to validate content
Configuration fails to validate
:32 PM, Amjad Syed wrote:
Hello
I am getting the following error when i run ccs_config_Validate
ccs_config_validate
Relax-NG validity error : Extra element clusternodes in interleave
You defined clusternodes.. twice.
That + the are more issues discoverable by more powerful validator
Hi last week I implemented the 2 node cluster with hp proliant. I used hp
ilo .power based fencing agents are preferred .
On 30 Jun 2014 09:28, Rajagopal Swaminathan raju.rajs...@gmail.com
wrote:
Greetings,
On Mon, Jun 30, 2014 at 5:18 AM, Eivind Olsen eiv...@aminor.no wrote:
The cluster
Hello
I am trying to start a virtual ip service on my 2 node cluster.
Here are the details of the network setting and configuration.
1 : Bond(heartbeat) . This is a private network with no switch involved.
Not available to public
node1: 192.168.10.11
node2 : 192.168.10.10
2. Fencing (Ilo)
Hi,
I have setup a 2 node cluster using RHEL 6.5 .
The cluster .conf looks like this
?xml version=1.0?
cluster config_version=7 name=oracleha
cman expected_votes=1 two_node=1/
fencedevices
fencedevice agent= fence_ipmilan ipaddr=10.10.63.93
login=ADMIN
crossover cable with bonding ? Do you have switch in
the middle ?
Note: Red Hat does not support use of a crossover cable for cluster
communication.
On 9 September 2014 12:44, Amjad Syed amjad...@gmail.com wrote:
Hi,
I have setup a 2 node cluster using RHEL 6.5 .
The cluster .conf looks
Hello,
We have implemented Active/passive (2 node cluster) with shared storage
using RHEL 6.5.
However now we would like to implement same in RHEL 7.x.
Are there any documents which will show how to implement the above.
thanks
Amjad
--
Linux-cluster mailing list
Linux-cluster@redhat.com
Hello,
We have implemented a two node failover cluster using RHEL pcs in active
passive mode
We have shared storage with one LUN,
Our concern is what if this LUN fails or there is hardware problem
accessing the data in it.
What is the best way to synchronize data between two LUNS ? any
Hello,
We are planning to build a 2 node Active/passive cluster using pacemaker.
Can the cluster be build between one physical and one VM machine in Centos
7.x?
If yes, what can be used as fencing agent ?
--
Linux-cluster mailing list
Linux-cluster@redhat.com
Hello,
We are using RHEL 7.2 to create an active/passive cluster using pacemaker.
The cluster will have shared storage.
Our servers have standard partition. Not LVM .
We are using only 2 servers for this cluster.
Can it be possible to create shared stroage resource in pacemaker without
using
12 matches
Mail list logo
